Loading ...
Loading ...
Loading ...
Appendix
21
The label printer stops while
printing a label.
Replace the tape cassette if striped tape is visible, as this indicates that you have
reached the end of the tape.
While printing, striped tape
appears.
The tape cassette is empty. Insert a new tape cassette.
The tape is not cut
automatically.
Select Auto Cut.
If using special tapes, cut the tape by hand.
Printed barcodes or QR codes
cannot be read.
• Try using another barcode scanner.
• Try using another QR code reader application.
• Change the tape.
Recommended: Black on white tape
• Enlarge barcodes or QR codes using the application, if possible.
There is an approximately 1 in.
/ 25 mm of blank space at the
leading edge of each printed
label.
Most TZe labels have a clear laminate top layer. This durable laminate helps the
label withstand abrasion, fading and wet conditions providing a crisp, readable
image. The process of adding this laminate layer results in the leading edge of
blank space. Adjusting the label’s margin or not cutting the last label may reduce
the amount of blank space.
• I cannot turn on the label
printer.
• The label printer powers off
when I try to print.
• The battery may be discharged. Charge it.
• Make sure you have removed the protective sheet. See Insert the Tape Cassette.
It is not possible to charge the
battery.
• Disconnect the USB cable and connect it again.
• Make sure you have removed the protective sheet. See Insert the Tape Cassette.
Battery life is short, even when
fully charged.
The battery may have reached the end of its life. Use a new battery.
I want to check I am using the
latest version of the software.
Windows
Use the P-touch Update Software to confirm if you have the latest version. See
Windows: Update Software.
Mac
See support.brother.com
Problem Solution
Loading ...
Loading ...