Loading ...
Loading ...
Loading ...
7-74
Maintenance
2.Remove the fuse panel cover by
pressing the tab and pulling up.
When the blade type fuse is dis-
connected, remove it by using the
clip designed for changing fuses
located in the engine room fuse
box. Upon removal, securely insert
reserve fuse of equal quantity.
3.Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4.Push in a new fuse of the same rat-
ing, and make sure it fits tightly in
the clips. If it fits loosely, consult an
authorized K900 Kia dealer.
Main fuse
If the main fuse is blown, it must be
removed as follows:
1.Remove the fuse panel cover on
the right side in the engine com-
partment.
2.Remove the nuts shown in the pic-
ture above.
3.Replace the fuse with a new one of
the same rating.
4.Reinstall in the reverse order of
removal.
✽ NOTICE
If the main fuse is blown, consult an
authorized K900 Kia dealer.
OKH073080N
Fuse Panel Cover
After checking the fuse panel in
the engine compartment,
securely install the fuse panel
cover. If not, electrical failures
may occur from water contact.
CAUTION
Visually inspect the battery cap
to ensure it is securely closed.
If the battery cap is not secure-
ly closed, moisture may enter
the system and damage the
electrical components.
CAUTION
KH USA 7:2018 4/14/2017 6:39 PM Page 74
Loading ...
Loading ...
Loading ...