Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Serf-CleaningCycle
1. Remove the broiler pan and grid,
oven racks, utensils and any foil
that may be in the oven.
2. Soil on the front frame and
outside the gasket on the door
liner will need to be cleaned
by hand.
Front Frame
Door Liner
Clean these areas with hot water,
soap-filled steel wool pads or
cleansers such as Soft Scrub ®to
remove any soil. Rinse well with clean
water and dry.
3. Wipe up any heavy spillovers on
the oven bottom.
4.. Do not clean the door gasket.
The fiberglass material of the oven
door gasket cannot withstand
abrasion. It is essential for the
gasket to remain intact. If you
notice it becoming worn or frayed,
it should be replaced.
The door gasket is designed to have
a 5"-6" gap at the bottom of the door.
This allows for proper air circulation.
Door Panel Gasket
Door Liner _ I_ 6"_1
It is normal for your oven door to give
the appearance of not having a good
seal against the oven. This is due to
the gasket. The location of the gasket
on the door maintains a good seal and
prevents any heat loss.
_ tensils should never be
left in the oven during a
clean cycle.
The oven racks may
be cleaned during the self-clean
cycle, but will lose their luster
and become hard to slide. If you
choose to leave them in during
the cycle, wiping them with
vegetable oil after the cycle will
help them slide easier.
For the first clean cycle, vent the
room with an opened window or
hood vent.
18
Loading ...
Loading ...
Loading ...