Loading ...
Loading ...
Loading ...
OPERATION
OvenContro/,Clockand Timer
Your new control has a series of
tones that will sound at different times.
These tones may sound while you set
the control for an oven function, or at
the end of the oven function. It will
also alert you there may be a problem
with the functions. Below are the
types of tones and a brief description
of each.
TONES WHILE SETTING THE
CONTROL -- When you press a
touch pad you will hear a beep.
This beep will let you know you have
placed enough pressure on the pad
to activate it. (The arrow pads do
not beep.)
END OF TIMED CYCLE TONE --At
the end of a timed cooking function,
you will hear 3 short beeps followed
by 1 beep every 6 seconds. This 6
second beep will continue to sound
until the CLEAR/OFF pad is pressed
or you may select the special feature
to cancel this 6 second beep from
sounding at the end of future cycles.
TO CANCEL THE 6 SECOND BEEP
1, Press and hold the BAKE and
BROIL pads, at the same time
for 3 seconds, until the display
SHOWS"SF'.
2. Press the KITCHEN TIMER pad.
The display will show "CON
BEEP" (continuous beep).
3, Press the KITCHEN TIMER pad
again. The display will show
"BEEP" (beep canceled).
4. Press the START pad to cancel
the 6 second beep and leave the
special feature mode.
If you would like to return the 6
second beep, repeat steps above
until the display shows your choice
and press the START pad.
ATTENTION TONE -- This tone will
sound if you make an error or an
oversight is made while setting an
oven function.
Examples would be:
a. Setting a clean cycle and the
oven door is not properly closed.
b. Setting function and not pressing
the START pad.
c. Pressing an additional function pad
without first setting a temperature
or time.
d. ERR will flash if you set an invalid
temperature. Press the CLEAR/
OFF pad to clear the control and
reset your oven function.
Any of these can be quickly identified
by watching the display.
PREHEAT TONE -- When you
set an oven temperature, the oven
automatically starts to heat. When the
temperature inside the oven reaches
the temperature you have set, a tone
will sound to let you know the oven is
ready for baking.
If you set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F-4" or "FI" there may be
a problem with the control or oven.
Simply press the CLEAR/OFF pad
and wait about an hour. Try setting
the function again. If the code
repeats, write down the flashing code
and call for service. Tell the
technician what code was flashing.
10
Loading ...
Loading ...
Loading ...