Loading ...
Loading ...
Loading ...
19
461308300_000 12/2013
Maintenance Schedule
The appliance should be checked by an
authorised person every year to ensure the
safe operation of the appliance. As part
of the inspection, the authorised person
should also check that the wall brackets
are engaged and securely mounted to the
wall. This maintenance is not covered by
warranty.
TECHNICAL INFORMATION
• The installation, adjustments, conversions and
maintenance operations listed in this part must
only be carried out by qualied personnel. The
manufacturer cannot be held responsible for any
damage to persons or property resulting from an
incorrect installation of the appliance.
• The safety and automatic adjustment devices of the
appliances may, during its life, only be modied by
the manufacturer or duly authorised supplier.
• In accordance with the gas standard, the all-gas
and combi appliances are “class 1” (free standing)
or “class 2 subclass 1” (recessed) and, as such,
must comply with the clearances specied in gure
below,consequently any side walls must be no
higher than the work top.
The appliance is to be placed directly on the oor and
should not be mounted on a base.
• The walls adjacent to and surrounding the appliances
must be able to withstand an temperature of 95 °C.
• The installation of all-gas and combi appliances
must comply with the standards in force.
• This appliance is not connected to a ue for
discharge of the combustion products; therefore, it
must be connected in compliance with the above
mentioned installation rules. Particular attention
must be paid to the instructions given below for
ventilation and aeration.
INSTALLATION
UNPACKING YOUR COOKER
• Once the wrapping has been removed from the outer
surfaces and the various inner parts, thoroughly
check that the appliance is in perfect condition. If
you have any doubts do not use the appliance and
call in a qualied person.
• Some parts mounted on the appliance are protected
by a plastic lm. This protection must be removed
before using the appliance. We recommend slitting
the plastic lm along the edges with a sharp knife or
pin.
• Do not move the appliance by the handle.
The packaging materials used (cardboard, bags,
polystyrene foam, nails etc.) must not be left
anywhere within easy reach of children as they
are a potential hazard source.
INSTRUCTIONS FOR THE INSTALLER
Loading ...
Loading ...
Loading ...