Loading ...
Loading ...
Loading ...
CAUTION
Do Not loosen or remove these 3 hex screws.
8
INSTALLATION
Toe Grille Must
Fit in Slot on
Anti-tip Bracket
Screw/Washer
Assembly
(2) Retaining Clips
3 Ensure both doors are bind-free with their
seals touching the cabinet on all four sides
and that cabinet is stable.
4 After unit is leveled, lower anti-tip leg
using a 3/8 inch socket wrench until it
rmly contacts the oor.
5 Install the toe grille by tting into place.
Cabinet Leveling & Refrigerator
Door Alignment (if necessary)
Guidelines for nal positioning of your refrigerator:
• All four corners of the cabinet must rest
rmly on the oor.
• The front should be slightly elevated to
ensure that doors close and seal properly.
• Doors should align with each other and
be level.
Most of these conditions can be met by raising
or lowering the adjustable front rollers.
To level the cabinet using the front rollers:
1 Slightly open freezer drawer if the toe grill
is installed. Lift the toe grille and gently
pull forward.
2 Make initial cabinet adjustments by using
the front roller height adjusting screws.
Use a 3/8 inch socket wrench to turn the
adjustment screws (1 per side).
DO NOT
Loosen
or
Remove
These 3
Hex
Screws
Raise
Lower
Anti-tip
Leg
To raise: turn adjustment screw clockwise.
To lower: turn adjustment screw
counterclockwise.
Loading ...
Loading ...
Loading ...