User Manual Amana WVW57UC6FS 36" Stainless Steel Wall Mount Flat Range Hood

CLEANING REMOVABLE GREASE FILTER:
IMPORTANT: Before cleaning, make sure all controls are off, and the vent hood is cool. Always follow label instructions on cleaning products.
CLEANING METHOD:
Turn off the vent hood before removing the filter.
Refer to the Owner's Manual for specific instructions.
Clean the filter in the sink with warm water and detergent, or the dishwasher.
Replace the filter.

IMPORTANT: Before cleaning, make sure all controls are off, and the vent hood is cool. Always follow label instructions on cleaning products.
CLEANING CONTROL KNOBS
Soap, water, and a soft cloth or sponge are suggested first unless otherwise noted.
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.
CLEANING CONTROL PANEL
IMPORTANT: Do not use soap-filled scouring pads, abrasive cleaners, cooktop polishing creme, steel wool, gritty washcloths, or paper towels.To avoid damage to the stainless steel, do not use cleaners that contain chlorine.
Soap, water, and a soft cloth or sponge are suggested first unless otherwise noted.
Glass Panel: Glass cleaner and soft cloth or sponge: Apply glass cleaner to soft cloth or sponge, not directly on the panel.

To clean and care for your stainless steel surfaces, follow these suggestions:

IMPORTANT: To avoid damage to the finish, do not use soap-filled scouring pads, abrasive or harsh cleaners, any cleaning product containing chlorine bleach, steel-wool pads, gritty wash cloths or certain paper towels.

TO CLEAN AND CARE:
Spray affresh™ Stainless Steel cleaner on a clean microfiber cloth.
Wipe the stainless steel in the direction of the grain.
TO RESTORE LUSTER:
Use the affresh™ Stainless steel wipes; follow the recommendations and directions on the label.
Wipe off any excess and use special care to avoid contact with any plastic parts, trim pieces, or rubber door gaskets. If the polish does contact any of these plastic parts, clean them with a nonabrasive sponge and mild detergent in warm water.
Thoroughly dry the area with a soft cloth.

Wash the exterior surfaces and gaskets with warm water and mild soap or detergent. Wipe and dry. We recommend using a clean micro fiber cloth or a soft clean cloth to polish and dry. Ensure to thoroughly dry all surfaces.

IMPORTANT: To avoid damage to the finish, do not use soap-filled scouring pads, abrasive or harsh cleaners, any cleaning product containing chlorine bleach, steel-wool pads, gritty wash cloths or paper towels. Using these types of products may scratch and/or dull the clear coat of the black stainless steel door.