Loading ...
Loading ...
Loading ...
9 - 2
REMOTE FAX OPTIONS
4
If your pager requires a PIN, enter the PIN, and then press #, press
Redial/Pause, enter your fax number followed by # #, and then press Set.
For example, 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
—OR—
If you do not need a PIN, press Redial/Pause, enter your fax number followed
by # #, and then press Set.
For example,
Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
5
Press Stop/Exit.
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages from
another location using Fax Forwarding, Paging or Remote Retrieval operations.
The LCD will indicate when you have a fax stored in memory. The LCD
prompts you to choose a fax setting.
1
Press Menu, 2, 5, 2.
2
Press or to select ON (or OFF),
and then press Set.
3
Press Stop/Exit.
4
Press 1 to erase faxes from memory and
to turn off Fax Storage.
—OR—
Press 2 to exit without deleting faxes or
changing this setting.
(See Printing a Fax in Memory, page 5-5.)
Backup Print
If you have set FAX STORAGE to ON, your MFC automatically prints faxes
as they are received into memory. This is a safety feature in case the power goes
out so you won’t lose your message.
You cannot change a Paging number or PIN remotely.
Press Redial/Pause for each 3.5 second delay, as needed.
If there are faxes in memory when you turn Fax Storage OFF, you must choose
to delete them or exit without turning Fax Storage on.
2.FAX STORAGE
ERASE ALL FAX?
1.YES 2.NO
Loading ...
Loading ...
Loading ...