Loading ...
Loading ...
Loading ...
31
ENGLISH
HOW TO USE
Operating the Dryer
Press the POWER button to turn on the dryer. The cycle LEDs will illuminate
and a signal will sound, if turned on. Refer to page 10.
3
Press the START/PAUSE button to begin the cycle. The cycle can be paused at
any time either by opening the door or by pressing the START/PAUSE button. If
the cycle is not restarted within 4 minutes, the dryer will shut off and the cycle
settings will be lost.
5
Turn the cycle selector knob either direction until the LED for the desired cycle
is on. The preset temperature, Dry Level, and option settings for that cycle will
be shown. Refer to the Cycle Guide. No special settings are necessary to take
advantage of your hybrid dryer’s energy saving capabilities. However, some
cycles and settings will save more energy than others. Default settings for the
selected cycle can now be changed if desired. This can be done using the cycle
modifier buttons as shown on page 34. Cycle options can be added using the
option buttons as shown on page 35-36.
4
NOTE
Not all options or modifiers are available on all cycles. A different chime will
sound and the LED will not come on if the selection is not allowed.
When the cycle is finished, the chime will sound if it is set. Remove your
clothing from the dryer immediately to reduce wrinkling. If Wrinkle Care is
selected, the dryer will tumble briefly every few minutes to help prevent
wrinkles from setting in the clothes.
6
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
care.
2
If the lint filter has not already been cleaned, lift out the filter and remove the
lint from the last load. This will help ensure the fastest and most efficient drying
performance. Make sure to reinstall the filter, pressing down until it clicks firmly
into place. The dryer will not operate without the lint filter in place.
1
Lint Filter
HOW TO USE
MFL67731031_en_170830.indd 31 2017.8.30 5:31:46 PM
Loading ...
Loading ...
Loading ...