Loading ...
Loading ...
Loading ...
21
ENGLISH
Venting the dryer
w
WARNING
To reduce the risk of fire, electric shock, or personal injury when using this appliance, follow basic precautions,
including the following:
• Failure to follow
these instructions can result in fire or death.
•
objects. Failure to follow these instructions can result
in fire or death.
•
is suitable and clean before installing the dryer.
Failure to follow these instructions can result in fire or
death.
• Venting must conform to local building codes.
Failure to follow these instructions can result in fire or
death.
•
Failure to follow these instructions can result in fire or
death.
•
ductwork inside the dryer cabinet and for venting
outside. Failure to follow these instructions can result
in fire or death.
• To reduce the risk of fire, combustion, or
exhaust dryer air into an enclosed and unventilated
area, such as an attic, wall, ceiling, crawl space,
chimney, gas vent, or concealed space of a building.
Failure to follow these instructions can result in fire or
death.
•
with plastic or thin foil ducting.
Failure to follow these instructions can result in fire or
death.
•
diameter with no obstructions. The exhaust duct
to clean any old ducts before installing your new
dryer. Failure to follow these instructions can result in
fire or death.
•
installations when it is impossible to make a
listed flexible metal transition duct may be used
between the dryer and wall connection only. The
use of this ducting will affect drying time. Failure to
follow these instructions can result in fire or death.
•
which extend into the duct that could catch lint and
reduce the efficiency of the exhaust system. Secure
all joints with duct tape. Failure to follow these
instructions can result in fire or death.
• To maximize operating results, please observe the
duct length limitations noted in the chart next
page. Failure to follow these instructions can result in
fire or death.
•
should obtain the necessary ductwork locally. The
end cap should have hinged dampers to prevent
backdraft when the dryer is not in use. Failure to
follow these instructions can result in fire or death.
• The Total length of flexible metal duct shall not
•
if any, specifically identified for use with the
appliance by the manufacturer shall be used. In the
United States, that only those foil-type flexible ducts,
if any, specifically identified for use with the appliance
by the manufacturer and that comply with the Outline
for Clothes Dryer Transition Duct, Subject 2158A, shall
be used.
INSTALLATION INSTRUCTIONS
MFL67731031_en_170830.indd 21 2017.8.30 5:31:17 PM
Loading ...
Loading ...
Loading ...