Loading ...
Loading ...
Loading ...
23
ENGLISH
Connecting electric dryers
w
WARNING
To help prevent fire, electric shock, serious injury, or
death, the wiring and grounding must conform to the
latest edition of the National Electrical Code, ANSI/NFPA
70 and all applicable local regulations. Please contact
a qualified electrician to check your home’s wiring and
fuses to ensure that your home has adequate electrical
power to operate the dryer.
Electrical Requirements for Electric Models Only
w
WARNING
To reduce the risk of fire, electric shock, or injury
to persons when using this appliance, follow basic
precautions, including the following:
• This dryer must be connected to a grounded
grounding conductor must be run with the circuit
grounding terminal or lead on the dryer. Failure to
do so can result in fire, explosion, or death.
• The dryer has its own terminal block that must
Failure to follow these
instructions can result in fire, explosion, or death.
•
by local codes. Allow sufficient slack in wiring so
dryer can be moved from its normal location when
necessary. Failure to do so can result in fire, explosion,
or death.
•
with dryer. Type of pigtail and gauge of wire must
conform to local codes and with instructions on the
following pages. Failure to follow these instructions
can result in fire, explosion, or death.
•
manufactured home installations, as well as all
connection must be used where local codes do not
permit grounding through the neutral wire. Failure
to do so can result in fire, explosion, or death.
w
WARNING
To reduce the risk of fire, electric shock, or personal
injury when using this appliance, follow basic
precautions, including the following:
with the dryer.
w
WARNING
To reduce the risk of fire, electric shock, or personal
injury when using this appliance, follow basic
precautions, including the following:
codes and ordinances.
manufactured home installations, as well as all new
Failure to do so
can result in fire, explosion, or death.
INSTALLATION INSTRUCTIONS
MFL67731031_en_170830.indd 23 2017.8.30 5:31:19 PM
Loading ...
Loading ...
Loading ...