Loading ...
Loading ...
Loading ...
8
NOTES:
� Check that the power supply cord is not damaged or pinched
or kinked between the ice maker and the cabinet.
� Check that the water supply line is not damaged or pinched or
kinked between the ice maker and the cabinet.
� Check that the drain line (on some models) is not damaged or
pinched or kinked between the ice maker and the cabinet.
� Check that the ice maker door is not flush with the standard
cabinets to avoid problems with opening the ice maker door.
Model Identification:
Standard model Custom panel model
Standard Model Utilities
A Width (for 15ʺ ice maker) 15ʺ (38.1 cm) Minimum
Width (for 18ʺ ice maker)
18ʺ (45.7 cm) Minimum
B Width of outlet location 6ʺ (15 cm)
C Outlet location—distance
from side
1ʺ (2.5 cm)
D Outlet location—distance
from bottom
12ʺ (30.5 cm)
E Width of water connection
location
3 1/2ʺ (8.9 cm)
F Height
34ʺ (86.4 cm) Minimum
34 1/2ʺ (87.6 cm) Maximum
G Height of outlet location 8ʺ (20.3 cm)
H Height of water connection
location
9ʺ (22.9 cm)
I
Depth of cabinet (minimum)
24ʺ (61.0 cm)
e
Recommended electrical connection location
w
Recommended water connection location
Model Utility/Air Flow Slot
C
E
A
B
F
D
7½"
(19.05 cm)
7½"
(19.05 cm)
Required zone
for utility hole/slot
cutout location
Utility/Air Flow Slot/Cutout Location Zone
Dimension A 14" (35.56 cm)
B 10.5" (26.67 cm)
C 7ʺ (17.8 cm)
D 0.75" (1.9 cm)
Diameter of the hole E 2ʺ (5.1 cm)
Dimension of cutout F 2ʺ (5.1 cm)
� Auxiliary pump ice maker models have been designed for flush
install in instances where the power supply, water supply, and
drain are located in adjacent cabinetry.
� For installation of product with utilities behind the ice maker,
flush install may not be achieved.
� Refer to the “Model Utility/Air Flow Slot” illustration, table for
utility/air flow slot cutout location, and paper template for
utility/air flow slot cutout location.
Loading ...
Loading ...
Loading ...