Loading ...
Loading ...
Loading ...
48 Setting Oven Controls
To cancel self clean:
Use caution when opening the oven door after self cleaning. The
oven may still be very hot and can cause burns. To avoid
possible burns, stand to the side of the oven when opening the
oven door to allow hot air or steam to escape. The oven bake
and broil elements may appear to have cooled after they have
been turned off. The elements may still be hot, and burns may
occur if these elements are touched before they have cooled.
IMPORTANT! Before restarting self clean, read the following
important notes:
• If your clock is set with the (default) 12 hr display mode, the
delay start for a self clean can only be programmed to start
up to 11 hours and 59 minutes after the time showing in the
display (be sure to set the clock to current time before
programming a delay start). To set a delay start self clean to
begin 12 or more hours (maximum is 23 hours and 59
minutes) after the time of setting, be sure to first set the
control in the 24 Hr display mode.
• If self clean was active and then interrupted by a power
failure or cancelled before the oven was thoroughly
cleaned, it may be necessary to run another self clean
cycle.
Setting Delayed Self Clean
You may want to set the oven to perform a self clean at a later
time (up to 12 hours later). The end time key will determine
when the cleaning will stop. The end time must be set far
enough from the real time to allow for the type of clean cycle
you select, whether 2, 3, or 4 hours. Remember to add 30 to 40
additional minutes of cooling time before using the oven for
cooking.
If you want to set a delayed self clean to end between 12 and
24 hours, use the user pref key to set the 12hr energy saving
mode (ES) to Off and also set the clock (CLO) to the 24 hr
mode.
Setting for a heavy (4 hour) self clean cycle to end at 8:00
o’clock:
Do not leave small children unattended near the appliance.
During the self clean cycle, the outside of the oven can become
very hot to touch and can cause burns.
Do not force the oven door open when self clean is active. This
can damage the automatic door-locking system. Use caution
when opening the door after self cleaning. The oven may still be
very hot and can cause burns. To avoid possible burns, stand to
one side of the oven when opening the oven door to allow hot air
or steam to escape.
IMPORTANT! The kitchen area should be well ventilated. Use
an open window, ventilation fan, or exhaust hood during the first
self clean cycle to help eliminate the normal odors associated
the initial clean cycle.
1. Press CANCEL off.
2. If the self clean cycle has heated the oven to a high
enough temperature, Hot will appear in the display
(Figure 50). Allow enough time for the oven to cool and
the door to unlock before the oven door may be opened.
Figure 50: Oven too hot for door to unlock
1. Ensure the oven is empty and remove all oven racks and
racks support. Be sure the clock is set with the correct
time of day and the oven door is completely closed. In
this example, the time of day should be earlier than 4:00
o’clock.
2. Press UPPER OVEN to light up the
available cooking modes keys.
3. Press clean.
4. Press heavy.
5. Press cook options. The end time icon
will appear.
6. Press end time. The numeric keypad will
illuminate.
7. Enter
8 0 0 on the numeric keypad.
8 0 0
8. Press START enter. The display will indi-
cate the time remaining before self clean
begins. When the self clean cycle begins,
the display will show the time remaining in
the self clean cycle.
Loading ...
Loading ...
Loading ...