Loading ...
Loading ...
Loading ...
6 Using the appliance
Press and go
Once all the necessary settings for the operating mode have been made, a
bar appears in the display and counts down 20seconds. If no further settings
are made during this time, operation starts automatically. If a setting is
changed, Press and go starts again.
The duration of Press and go can be adjusted (see page 50) or it
can be deactivated in the user settings.
▸ To start operation immediately, i.e. without Press and go, select .
– If set, the countdown to the time remaining appears in the display and
in the digital display.
The operating mode selected cannot be changed once it has started.
For appliances without a retractable handle: The handle remains ex-
tended both during operation and until after operation has ended. It re-
tracts when the appliance has cooled down sufficiently.
Display overview
곍+RWDLU
6HWWHPSHUDWXUH
굴굵굶
굯
K
4
6
5
3
2
1
1
Operating mode settings
2
Current position of the adjusting
knob / selected setting
3
Press and go
4
Operating mode with symbol
5
Set values / recommended values
6
Symbols for settings
6.2 Checking and changing the settings
▸ Select the symbol for the desired setting.
▸ To change the value, turn the adjusting knob to the right or left.
▸ Press the adjusting knob to confirm the setting.
– The operating mode settings are displayed.
– The changed value can be seen above the corresponding symbol.
The end time can only be changed during the first 60seconds of
operation.
24
Loading ...
Loading ...
Loading ...