Loading ...
Loading ...
Loading ...
while polar aligned, you would want to set the azimuth approach to the direction that allows the scope to compensate for different
load level on the motors and gears when pointing in different parts of the sky.
To change the goto approach direction, simply choose Goto Approach from the Scope Setup menu, select either Altitude or
Azimuth approach, choose positive or negative and press Enter.
Cordwrap
- – Cord wrap safeguards against the telescope slewing more than 360º in azimuth and wrapping accessory or power
cables around the base of the telescope. This is useful any time that cables are plugged into the base of the telescope. By default,
the cord wrap feature is turned off when the telescope is aligned in altazimuth and turn on when aligned on a wedge.
U
U
t
t
i
i
l
l
i
i
t
t
y
y
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
Scrolling through the MENU options will also provide access to several advanced utility functions such as anti-backlash
compensation and slew limits.
Wedge Align
– The NexStar has two equatorial alignment modes (one for the northern hemisphere and one for the southern) that
will help you to polar align your telescope when using an optional equatorial wedge. See the Astronomy Basics section of the
manual for more information on the Wedge Align feature.
GPS On/Off
- Allows you to turn on\off the GPS module when using the optional CN16 GPS accessory. When aligning the
telescope, the NexStar still receives information, such as current time, from the optional GPS accessory. If you want to use the
hand control database to find the coordinates of a celestial object for a future date you would need to turn the GPS module off in
order to manually enter a date and time other than the present.
Light Control – This feature allows you to turn off both the red key pad light and LCD display for daytime use to conserve
power and to help preserve your night vision.
Factory Setting – Returns the NexStar hand control to its original factory setting. Parameters such as backlash compensation
values, initial date and time, longitude/latitude along with slew and filter limits will be reset. However, stored parameters such as
user defined objects will remain saved even when Factory Settings is selected. The hand control will ask you to press the "0" key
before returning to the factory default setting.
Version - Selecting this option will allow you to see the version number of the hand control software.
Get Axis Position - Displays the relative altitude and azimuth for the current position of the telescope.
Goto Axis Position - Allows you to enter a specific altitude and azimuth position and slew to it.
Hibernate - Hibernate allows the NexStar to be completely powered down and still retain its alignment when turned back on.
This not only saves power, but is ideal for those that have their telescopes permanently mounted or leave their telescope in one
location for long periods of time. To place your telescope in Hibernate mode:
1. Select Hibernate from the Utility Menu.
2. Move the telescope to a desire position and press ENTER.
3. Power off the telescope. Remember to never move your telescope manually while in Hibernate mode.
Once the telescope is powered on again the display will read Wake Up. After pressing Enter you have the option of scrolling
through the time/site information to confirm the current setting. Press ENTER to wake up the telescope.
Pressing UNDO at the Wake Up screen allows you to explore many of the features of the hand control without
waking the telescope up from hibernate mode. To wake up the telescope after UNDO has been pressed, select
Hibernate from the Utility menu and press ENTER. Do not use the direction buttons to move the telescope while in
hibernate mode.
Sun Menu
For safety purposes the Sun will not be displayed as a database object unless it is first enabled. The enable the Sun, go to the Sun
Menu and press ENTER. The Sun will now be displayed in the Planets catalog as can be used as an alignment object when using
the Solar System Alignment method. To remove the Sun from displaying on the hand control, once again select the Sun Menu
from the Utilities Menu and press ENTER.
H
H
e
e
l
l
p
p
f
f
u
u
l
l
H
H
i
i
n
n
t
t
24
Loading ...
Loading ...
Loading ...