Loading ...
Loading ...
Loading ...
Speaker Settings
MENUSoundSpeaker Settings
●
Auto Volume
Because each station has its own broadcasting conditions, the volume may fluctuate each time you change the
channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
"
To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume
control of the connected source device may not be applied if Auto Volume is set to Normal or Night.
●
TV Installation Type
Specify the TV's installation type. Choose between Wall Mount and Stand to optimise the TV's sound automatically.
Additional Settings
(digital channels only)
●
DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one
of the signals received during a digital TV broadcast) to a desired level.
"
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
"
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
●
HDMI Audio Format (PCM / Bitstream): Sets the audio input signal format suitable for the external device
connected to the TV's HDMI port.
●
Dolby Digital Comp (Line / RF): This function minimises signal disparity between a dolby digital signal and a voice
signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
"
Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night
time.
Line
RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
Reset Sound
MENUSoundReset Sound
Reset all sound settings to the factory defaults.
Selecting the Sound Mode
t
When you set to Dual
fg
, the current sound mode is displayed on the screen.
Audio Type Dual
f
-
g
Default
A2 Stereo Mono Mono
Automatic change
Stereo Stereo
Mono
Dual Dual
f
Dual
g
Dual
f
NICAM Stereo Mono Mono
Automatic change
Stereo Mono
Stereo
Dual
Mono
Dual
f
Dual
g
Dual
f
"
If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono.
"
Only activated in stereo sound signal.
"
Only available when the input Source is set to TV.
English - 40
Basic Features
Loading ...
Loading ...
Loading ...