NEWBULIG SI-SZJ2025 Vibration Plate Exercise Machine Body Shaker

Product's Documents

Below are documents related to this product, you can read online or download:
SI-SZJ2025 photo

User Manual

This is the main product document for model SI-SZJ2025.

The file format is pdf, 4 pages, you can download this manual here .

background
Technical Support
Other Info
Thank you for choosing this product. We strive to provide you with the
best quality products and service in the industry. Should you have
any issues, please don't hesitate to contact us.
6269443420 | 6267435564
6269443420 | 6267435564
VibrationPlate
Instruction Manual
6269443420 | 6267435564
EST 9:00AM--17:00PM
SI-SZJ2025
background
Safety Instructions
Product Specifications
Start
Time
Time
Power On /off
Speed
Speed
Stop
30
120
90
120V~
Product Name Voltage Power Gear Levels
130W
1 2
1-120 levels
Thank you for purchasing this Vibration Plate. For your safety, please read the
following instructions carefully before use:
1. Read this manual carefully before installation and operation.
2. Warm up before use. Do not attempt to disassemble the vibration plate. Ensure
that the power supply voltage is 120 V / 60 Hz.
3. This product is not equipped with a transformer and must be connected to a
dedicated grounded outlet. Do not connect other appliances to the same outlet.
The power supply must provide at least 6 A.
4. Place and use the vibration plate only on a flat, clean indoor floor. Do not use
it continuously for more than 20 minutes.
5. Do not move the vibration plate while it is in use. Always turn off the power
after use.
6. Inspect all parts of the vibration plate for proper appearance and function before
each use. If any abnormalities occur, turn off the machine immediately and contact
our after-sales service.
7. Do not use the vibration plate if it malfunctions, especially in case of a damaged
power cord.
8. Children or individuals with mobility
impairments must use the vibration
plate under supervision.
10. Individuals with external injuries,
as well as pregnant or menstruating
women, should not use the vibration
plate.
9. Individuals with health conditions
such as heart disease, diabetes, kidney
or liver disease, cancer, or osteoporosis
should consult a doctor before use.
11. This product is designed for
home (indoor) use only. Repair and
maintenance services apply
exclusively to products used in home
environments.
Vibration Plate
Button Instructions:
Note
The remote control has an effective range of up to 1.5 m. During operation, the
infrared transmitter at the top of the remote control must be aimed at the
infrared sensor on the vibration plate.
Remote Control
① Power Button
After plugging in the power supply, the screen will display "15:00".Press the button to
turn on/off the machine.Press the button to shut down the machine and enter the
standby mode. The screen will display "----".
② Decrease Button
Before starting, press "-" to decrease the workout time. After the workout starts, press "-"
to decrease the speed.
③ Increase Button
Before starting, press "+" to increase the workout time. After the workout starts, press "+"
to increase the speed.
④ Shortcut Mode Button
Quickly switches between five preset speed levels: 30, 50, 70, 90, and 120.
⑤ Start /Pause
Press to start or pause the vibration plate. After pausing, press again to resume. The
previous program settings are retained.
Control Panel
Includes 9 automatic
programs: P1–P9
Includes 5 speed modes:
M1–M5 (30, 50, 70, 90, 120).
background
3 4
Instructions for Use Explanation of Exercise Posture
1. Stand firmly on the vibration plate and press the Start button on the remote control to
start the machine.
2. For detailed remote control functions, refer to the button instructions.
3. When standing on the vibration plate, you can use the three vibration zones: place your
feet in different positions to simulate walking, jogging, or running. Adjust the distance
between your feet to change the intensity of the workout.
4. For non-standing exercises, begin with a low speed and adjust as needed to avoid
discomfort from excessive vibration.
5. Do not use the vibration plate for more than 20 minutes at a time to avoid excessive
strain on the body.
Usage Recommendation
Low to medium speed gear5-10 minutes each time1-3 times a dayGeneral Fitness
Medium to high speed gear
10-20 minutes each time4-8 times a dayWeight Loss Fitness
Gear RecommendationDurationExercise FrequencyCategory
The button activates 9 exercise modes, each with intelligent speed adjustment
and a default duration of 15 minutes:
Using the vibration plate can help relax the body and mind, relieve muscle soreness,
reduce fatigue, and improve blood circulation.
During initial use, some users may experience dizziness, stomach discomfort, itching,
or skin redness. These reactions are generally normal and can be relieved by taking a
short rest. If symptoms persist or do not improve after resting, stop using the vibration
plate and seek medical attention immediately.
To adapt safely, start with a side-seated position and gradually increase usage during
the first session.
Side-Seated Position
Leg-Lift Position
Sit on a chair with both feet lightly placed on the vibration plate. Keep your body relaxed. This position
primarily targets the calf muscles.
Sit on the vibration plate with both legs suspended and both hands holding the handrails (or grip handles).
This posture primarily engages the leg muscles, glutes, and abdominal muscles.
Crouching Position
Place one foot on the vibration plate's footrest, keep your upper body upright, and perform a half squat
with your legs. This posture primarily targets the thighs and calves of the supporting side.
Front-Crawl Position
Extend both legs backward and keep them flat, support yourself with your hands on the vibration plate,
and assume a prone position. This posture primarily engages the muscles of the arms and upper back.
Cross-legged Sitting Position
Sit cross-legged on the vibration plate, place both hands on your knees, and keep your eyes closed to
relax. This posture primarily targets the legs and glutes.
Single-Leg Position
Place one foot on the vibration plate's footrest while keeping the other leg straight on the floor. This
posture primarily engages the thigh and calf muscles of the supporting side.
Seated Position
Sit on the vibration plate, hold its edges with both hands, and bend or straighten your legs as needed.
This posture primarily engages the leg and glute muscles.
Half-Squat Position
Stand on the vibration plate with both legs slightly bent, place both hands flat on the surface or handrails
for support, and maintain an upright, balanced posture. This position primarily targets the back muscles,
biceps, and legs.
Standing Position
Stand with your feet apart, hands on your hips or placed flat. Adjust the distance between your feet as
needed. This posture engages the entire body.
Bent-Leg Position
Stand facing away from the vibration plate, place one bent leg on the machine's footrest and the other
on the floor. This posture primarily engages the leg and glute muscles.
Back-Lying Position
Remote Control
Lean your body backward, place both legs on the vibration plate, and support yourself with your hands
on the floor. This posture primarily engages the leg muscles.
P1
Light Exercise
P2
Moderate
Exercise
P3
Walking
Exercise
P4
Brisk Walking
Exercise
P5
Jogging
Exercise
P6
Professional
Exercise
P7
Sprinting
Exercise
P8
Vigorous
Exercise
P9
nuR deepS
Exercise
background
Note
5 6
Unable to Power on
Machine makes
a "clicking" sound
during operation
No response when
operating with the
remote control
Power plug not properly inserted.
Insert the power plug properly.
Cleaning and Maintenance
Troubleshooting
1. Body Cleaning
Before cleaning, ensure the Vibration Plate is powered off and unplugged.
Clean the footrest and casing with a soft cloth slightly dampened with a mild detergent,
then wipe dry with a clean cloth.
Note: Do not use cleaning agents containing benzene, acetone, alcohol, gasoline, or
other corrosive or volatile substances. Avoid spilling liquids into the Vibration Plate to
prevent short circuits.
2. Maintenance
Keep the Vibration Plate clean and store it away from high temperatures and humid
environments. If the product will not be used for an extended period, keep it free of dust.
Problem Possible Cause Solution
Power switch not turned on.
Fuse blown due to a sudden current
surge.
Turn on the power switch; the
indicator light should illuminate.
Replace the fuse with one of the
same type and rating.
This clicking sound is normal during
operation and does not indicate a
mechanical fault.
No action required.
Machine stops
during use
Unable to operate
normally
The remote control battery is dead or
depleted.
The remote control is out of effective
range.
The default working time has expired.
The machine has received excessive or
conflicting commands.
Ensure the remote control is within
1.5 meters of the vibration plate.
Turn off the vibration plate, wait a
few seconds, and then restart.
Restart the machine.
Replace the battery.
WARNING: To reduce the risk of injury, read and understand the User Manual
before using this product. Save these instructions for future reference.
WARNING
LABEL
PRODUCT
LABEL
Product Name: Vibration Platform
Model: Sl-SZJ2025-21 Max Load:280lbs/127kg
Rated current:1.2A Rated Voltage: 120v~60hz
Production Date:
For Household Use Only / Usage domestique seulement
CONFORMS TO UL STD. 1647
CERTIFIED TO CSA STD. C22.2 NO.68
Yongkang Suosheng Technology Co., Ltd
Made in China(SS)
5035847
WARNING
AVERTISSEMENT
For Household Use Only
Risk of personal inju – Keep children under the age of 13
away from machine.
To reduce the risk of personal inju, read and understand all
the instructions before using this product.
Usage domestique seulement
Risque de blessures corporelles - gardez les enfants de moins
de 13 ans à l’éca des machines.
Pour réduire le risque de blessures, veuillez lire et comprendre
attentivement toutes les instructions avant d’utiliser ce
produit.

Specifications

Indexed Terms: Vibration Plate

NEWBULIG SI-SZJ2025 Questions and Answers

Questions and Answers

Related Products