DESCALING · ESSENTIAL CARE
• After 300 brewing cycles, or
• Every 2–3 months (recommended maintenance).
• Every 1–2 months (hard water regions).
When to Descale
• After entering descaling mode, OPEN the steam knob to begin descaling.
• If the steam knob is closed, the machine will not pump water.
Start Descaling
1. Power on the machine
and allow it to fully
preheat.
Descaling mode is now active.
(Manual activation available at any time)
2. Press and hold
“ ”
for 3 seconds.
3.
“ ”
indicators alternate.
Enter Descaling Mode
1. Fill the water tank with
descaling solution diluted
with water up to the MAX line.
2. Place a large container
under the steam wand.
3. Steam knob remains
CLOSED at this stage.
Preparation
AUTOMATIC DESCALING CYCLE
• Pumping : 6 seconds ON / 10 seconds OFF.
• Total : 18 automatic cycles.
The process runs automatically. No user intervention required.
Cycle Details
• When descaling is finished, the machine emits ”3 Beeps“ to indicate completion.
• All indicator lights will flash.
• Turn the steam knob to the ”OFF Position“ to stop the flashing.
Completion
• Run one full cycle with clean water only.
• Ensures optimal taste and removes residual solution.
• Regular descaling preserves flavor quality and extends the life of your machine.
Aftercare (Recommended)
• If descaling mode is activated by mistake, “Simply Restart the Machine” to exit the mode.
Accidental Activation
Indicator behavior :
•
Steam knob closed
“ ”
lights alternate.
•
Steam knob open
“ ”
lights alternate.
During Operation
