Product Overview
Switch Button
Indicator
1/ Green light (solid):
UVC-light cleaning in
progress.
2/ Green light (flashing):
Charging in progress.
3/ White light (solid):
Fully charged.
4/ Red light (solid):
Low battery.
USB-C Charging Port
Place the electric
toothbrush inside and
close the lid.
Product Specifications
Warning
How to Use
Product: UVC Travel Case
Model: B2W
Rated Power: 2.5W
Rated Voltage: 5V
Work Time: 60 seconds
Battery Life: Approx. 35 days
Battery Capacity: 230mAh
Charging Time: Approx. 2
hours
*Battery life may vary depending on
frequency of use.
*Based on 1-minute cycle twice per day.
*Use only a 5 V USB power source.
*Do not dispose of in household waste.
Dispose of in accordance with local
regulations.
Press the button once.
The indicator light will
turn green and cleaning
cycle will begin.
Connect to a power
source to charge both
the case and brush
simultaneously.
• This product contains a UVC light source.
• Do not expose eyes or skin to UVC light.
• Always keep the lid closed during UVC
cleaning cycle.
• Keep out of reach of children.
01
02
03
Recyclable -
check locally
BOX
Home
Compostable
WRAPS
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
-This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
