User guide
WARNING! Reduce the risk of serious injury by reading the User
Guide to your nutribullet Power Core
™
Blender before operating.
Save these instructions. Ensure anyone who uses the nutribullet
®
knows how to do so safely.
IMPORTANT SAFEGUARDS
When operating your nutribullet
®
device, remember:
SAFETY COMES FIRST. WHEN USING ANY ELECTRICAL APPLIANCE,
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED,
INCLUDING THE FOLLOWING:
WARNING! To avoid the risk of serious injury, death, property damage,
or damage to your device, carefully read all instructions before
operating your nutribullet
®
device. When using any electrical
appliance, basic safety precautions should always be observed,
including the important information in this User Guide.
Ensure that anyone using this nutribullet
®
product understands the
health and safety information included in this User Guide, a well as any
additional safety or usage instructions provided. Each person using a
device should carefully read the User Guide in its entirety to become
familiar with the safe operation of the unit.
!
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY
GENERAL USE AND SAFETY:
Failure to follow all instructions
regarding the use of your
nutribullet
®
device may result in
serious personal injury, death, or
property damage. Be aware of
possible hazards when using or
storing your nutribullet
®
.
WARNING! EXTREME CAUTION
SHOULD BE EXERCISED
WHEN USING HOT, WARM, OR
CARBONATED INGREDIENTS IN
THE PITCHER. ALWAYS MAKE
SURE THE VENTED PITCHER
LID IS SECURED ONTO THE
PITCHER BEFORE OPERATING,
AND EXERCISE CAUTION WHEN
OPENING THE PITCHER LID, HOT
STEAM OR SPLATTERING OF HOT
INGREDIENTS MAY OCCUR.
WARNING! NEVER BLEND FOR
LONGER THAN ONE MINUTE.
DO NOT RUN CONSECUTIVE
BLENDING CYCLES THAT EXCEED
ONE MINUTE TOTAL.
• Do not use the nutribullet
®
for
other than its intended purpose.
• Do not leave or put non-food items
in any of the attachments when
blending. Doing so may damage
the unit or crack or shatter the
attachment, resulting in bodily
injury or property damage.
• Close supervision is necessary
when any appliance is used by or
near children to ensure they do
not play with the appliance. Keep
cord out of reach of children.
• This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory, or mental capabilities,
or lack of experience and
knowledge, unless they
are closely supervised and
instructed concerning the use
of the appliance by a person
responsible for their safety.
• NEVER LEAVE THE NUTRIBULLET
®
UNATTENDED WHILE IT IS IN USE.
• Do not place or operate your
nutribullet
®
on uneven or
unstable surfaces.
• The risk of fire, shock, or damage
to nutribullet
®
during cleaning
can be reduced by taking the
following precautions: Turn o
your device and unplug it before
cleaning.
- Only clean the exterior of
your device.
- Clean your device with a
dry cloth.
• To protect against the risk of
electrical shock, DO NOT immerse
the Motor Base in water or other
liquids. The Motor Base should
only be cleaned by gently wiping
with a clean cloth.
• Do not place any nutribullet
®
part
or accessory in a microwave,
conventional oven, air fryer,
or stovetop pot, or immerse in
boiling water, as this will damage
the part.
• Do not place or operate your
nutribullet
®
on or near a hot
gas or electric burner, or in
a heated oven.
WARNING! NEVER WASH YOUR
NUTRIBULLET
®
PARTS OR
ACCESSORIES USING THE
SANITISE OR HEAT CYCLE OF
YOUR DISHWASHER. DOING SO
CAN WARP THE PART, WHICH
CAN CREATE HAZARDOUS
CONDITIONS DURING USE THAT
MAY RESULT IN BODILY INJURY
OR PROPERTY DAMAGE.
• NEVER place any nutribullet
®
parts or accessories in the freezer.
Do not use nutribullet
®
parts and
accessories as storage containers
in the freezer.
• Never attempt to defeat any
safety interlock mechanisms on
the appliance.
• Remove and safely discard
any packaging material or
promotional labels before using
the appliance for the first time.
• Do not operate your nutribullet
®
if
any of the parts and accessories
are or appear to be damaged
in any manner that may impair
proper function or create a
safety hazard. If you suspect
your nutribullet
®
parts and/or
accessories may be damaged,
contact Customer Service for
assistance at AU: 1300 285 538 /
NZ: 0800 232 633.
• Do not use parts, accessories
or attachments from other
manufacturers, dierent models
of nutribullet
®
or magic bullet
®
products, or canning jars. Use of
parts, accessories or attachments
NOT specifically designed for
your particular nutribullet
®
device may damage your unit
or cause serious bodily injury,
fire, or electric shock. Use only
genuine nutribullet
®
attachments/
accessories specifically designed
for your nutribullet
®
device.
Aftermarket parts are not made
to nutribullet
®
specifications and
may damage your unit or cause
serious injury.
• DO NOT USE OUTDOORS.
• ALWAYS UNPLUG YOUR
NUTRIBULLET
®
WHEN NOT IN USE.
• To unplug, grasp the plug and pull
from the outlet. Never pull from
the power cord.
• Always POWER OFF and UNPLUG
the unit and wait until the blades
come to a complete stop before
assembling, disassembling,
changing accessories, or cleaning.
USING THE BLENDING PITCHER:
WARNING! AFFIX THE PITCHER
LID TO THE PITCHER BEFORE
BLENDING TO PREVENT
INGREDIENTS FROM SPLASHING.
WARNING! ALWAYS AFFIX THE
VENTED PITCHER LID TO THE
BLENDING PITCHER WITH
THE LID CAP ON AND CLOSED
BEFORE BLENDING TO PREVENT
HOT INGREDIENTS FROM
SPLATTERING, WHICH MAY
CAUSE BURNS, BODILY INJURIES,
OR PROPERTY DAMAGE.
WARNING! AFTER BLENDING
HOT INGREDIENTS OR LIQUIDS,
EXERCISE CAUTION WHEN
OPENING THE PITCHER LID, AND
BE MINDFUL OF ESCAPING
HOT STEAM OR SPLATTERING
HOT INGREDIENTS.
• Do not overfill the Blending
Pitcher beyond the MAX line.
• Do not use the Blending Pitcher if
you detect cracking, cloudiness,
Blades do not turn smoothly, or
other damage. Visit bulletbrands.
com.au / bulletbrands.co.nz
or contact customer service to
purchase a new Blending Pitcher.
• Pressure generated from
blending hot liquids may push
the Lid o the Pitcher. To prevent
possible burn injuries, do not fill
the pitcher beyond the max line
and check that the vent slots are
not obstructed.
WARNING! TO INCORPORATE
INGREDIENTS DURING
BLENDING, CAREFULLY OPEN
THE LID CAP FROM THE PITCHER
LID AND GENTLY POUR OR
DROP INGREDIENTS INTO
THE MIXTURE. BE ESPECIALLY
MINDFUL WHEN ADDING TO HOT
INGREDIENTS AND LIQUIDS, AS
ESCAPING STEAM OR SPLATTERS
MAY PRESENT A RISK OF INJURY.
• When using manual speeds, start
blending on the LOW setting and,
once ingredients are integrated,
adjust the speed as needed.
BLENDING PITCHER SAFETY:
• Never run the appliance
while empty.
• Proper Blending Pitcher use is
important for the safe operation
of your nutribullet
®
. Using the
Blending Pitcher inconsistent with
these instructions may result in
bodily injury, property damage,
or damage to your unit.
• Only operate the Blending Pitcher
with the Pitcher Lid and Lid Cap
securely locked in place.
• Before blending, check that the
vent slots on the Pitcher Lid are
clear and unobstructed. Clogged
or obstructed vent slots will
pressurise the contents, which can
cause the release of hot steam or
the splattering of ingredients
upon opening.
• For recipes that require certain
ingredients to be incorporated
during blending, first add the
base ingredients, then attach the
Pitcher Lid and begin blending.
Once the ingredients are mixed
well, twist open the Vented Lid
Cap and carefully pour or drop
ingredients into the blended
mixture. If the blended mixture
is hot or warm, use caution and
open the Vented Lid Cap slowly,
being mindful of escaping hot
steam or the splattering of hot
ingredients. Always reinstall the
Vented Lid Cap after adding
ingredients.
• NEVER place hands or use
utensils such as spatulas, spoons,
or other tools that may make
contact with the spinning blades
while in operation. Doing so
can damage the unit, shatter the
Blending Pitcher, or cause severe
bodily harm.
• ALWAYS turn o and unplug
the blender ensuring that the
blades are fully stopped before
adjusting ingredients. Use a long
spoon, silicone spatula or wooden
spoon to scrape down the sides,
pushing the ingredients toward
the center. Avoid using sharp or
metallic objects that may contact
or damage the blades. REMOVE
ALL UTENSILS AND NON-FOOD
ITEMS FROM THE PITCHER
BEFORE OPERATING TO PREVENT
BODILY INJURY, OR DAMAGE TO
THE BLADE OR PITCHER. before
replacing the Pitcher Lid and Lid
Cap and resuming blending.
GENERAL BLADE SAFETY:
WARNING! BLADES ARE SHARP!
HANDLE WITH CARE AND DO
NOT TOUCH THE SHARP EDGES
OF THE BLADES THAT MAY
CAUSE INJURIES. NON-FOOD
ITEMS OR HARD INGREDIENTS
MAY DAMAGE THE BLADES.
ROUTINELY INSPECT THE BLADES
AND DISCONTINUE USE IF THE
BLADES ARE DAMAGED OR DO
NOT FREELY ROTATE. CONTINUED
USE WITH DAMAGED BLADES
OR USE INCONSISTENT WITH
THESE INSTRUCTIONS MAY
RESULT IN BODILY INJURY,
PROPERTY DAMAGE, OR
DAMAGE TO YOUR UNIT.
WARNING! NEVER STORE THE
UNIT WITH THE BLADE EXPOSED.
ALWAYS COVER THE BLADE WITH
THE PITCHER LID. EXPOSED
BLADES PRESENT A LACERATION
HAZARD THAT MAY CAUSE
SEVERE PERSONAL INJURY.
• DO NOT crush ice by itself. Your
nutribullet
®
is not intended to be
used as an ice crusher. Doing so
may shatter the Pitcher, causing
injury or damage. Always add
a sucient amount of liquid
ingredients when blending.
• Do not overload the Pitcher,
as this may prevent the blade
from spinning.
• DO NOT blend stone fruit in this
appliance unless pits/seeds have
been removed. Fruit pits may
damage the Pitcher, potentially
resulting in shattering and
personal injury.
• Do not attempt to grind dry
ingredients such as grains,
cereal, or coee, as this may
overheat the motor and/or
damage the blades.
• AVOID CONTACT WITH MOVING
PARTS! Keep hands and utensils
out of and away from the blade to
reduce the risk of severe personal
injury or damage to the unit.
• NEVER use the heat/sanitise
cycle when cleaning the Pitcher,
Lid, Lid Cap or accessories in
the dishwasher.
• Periodically inspect your blade.
If the blades do not rotate freely
or are damaged, immediately
discontinue use and contact
Customer Service.
• Use of incompatible parts or
aftermarket parts may result in
damage to your nutribullet
®
unit,
or present safety hazards that
may cause personal injury
or damage. When ordering
replacement parts, always use
genuine nutribullet
®
parts.
ELECTRICAL SAFETY:
Modification, improper use, and
failure to follow the instructions
for proper setup, use, and care
of your nutribullet
®
device can
increase the risk of property
damage, serious personal injury,
or death.
WARNING! NEVER USE THE UNIT
IN COUNTRIES OR LOCATIONS
WITH INCOMPATIBLE
ELECTRICAL SPECIFICATIONS OR
PLUG TYPES.
WARNING! DO NOT USE THE UNIT
WITH A VOLTAGE CONVERTER
DEVICE, AS IT MAY CAUSE
ELECTRICAL SHORTING, FIRE, OR
ELECTRIC SHOCK, ALL OF WHICH
MAY RESULT IN PERSONAL
INJURY OR PRODUCT DAMAGE.
• HOW TO CLEAN UP A SPILL:
STEP 1: The most important thing
is to UNPLUG the Motor Base
before cleaning!
STEP 2: Make sure the Blade is
not attached to the Motor Base.
STEP 3: Use a damp cloth to wipe
down the inside and outside of
the Motor Base.
• In order to avoid a hazard due
to inadvertent resetting of the
thermal cut-out, this appliance
must not be powered or operated
through an external switching
device, such as a timer, or
connected to a circuit that is
regularly switched on and o by
the utility.
• Do not use the cord, plug, or Motor
Base if it has been immersed
in water or other liquids. Any
significant spillage on, under, or
around the Motor Base should be
cleaned and dried before plugging
in and using the unit.
• Do not modify the electrical cord
in any way.
• Do not attempt to plug the unit
into an electrical outlet with
wet hands.
• Avoid contact with the control
panel display when the power
icon is illuminated to prevent
inadvertent and unexpected
operation of the unit.
• Do not modify the electrical cord in
any way.
• Do not operate any unit with a
damaged electrical cord or plug.
The electrical cord and plug are
not suitable for replacement. If
damaged, the appliance should be
replaced. Please visit bulletbrands.
com.au / bulletbrands.co.nz to
contact customer service.
• Do not allow or place the electrical
cord near or touching any hot
surfaces, heat source, or flame,
including the stove.
• Do not allow the electrical cord
to hang over the edge of a table
or counter.
• Do not pull, twist, or damage the
power cord.
• Overloading the unit with ice or
other ingredients may overheat
the motor and engage the thermal
breaker. If the internal thermal
breaker shuts o the motor,
unplug the Motor Base and let it
cool for an hour before attempting
to use it again. The thermal
breaker will reset when the unit
is unplugged and the thermal
breaker cools down.
• Always UNPLUG your nutribullet
®
when it is not in use, and when
assembling, disassembling,
changing accessories, or cleaning.
• NEVER pull the power cord to
remove the plug from the outlet. To
unplug, grasp the plug and
pull from the outlet.
• Use of incompatible parts or
aftermarket parts may result in
damage to your nutribullet
®
or present safety hazards that
may cause personal injury or
property damage. When ordering
replacement parts, always use
genuine nutribullet
®
parts and
accessories from bulletbrands.
com.au / bulletbrands.co.nz.
VENTILATION:
• NEVER obstruct the ventilation
openings on the bottom of the
Motor Base of your nutribullet
®
device. Openings on the bottom
of the Motor Base should be
free of dust and lint and never
obstructed. Obstructing the
ventilation openings may
overheat the motor, presenting
a fire hazard that may cause
property damage, serious
personal injury, or death.
• ALWAYS operate the nutribullet
®
on a level surface, leaving
unobstructed space beneath and
around the Motor Base to permit
proper air circulation. Slots on
the bottom of the Motor Base are
provided for ventilation to ensure
reliable operation and to prevent
the motor from overheating.
• NEVER place your nutribullet
®
on top of flammable materials
such as newspapers, tablecloths,
napkins, dishtowels, placemats, or
similar materials.
98
MEDICAL SAFETY:
WARNING! ALWAYS USE
CAUTION WHEN COMBINING
INGREDIENTS. FAILURE TO
FOLLOW NUTRIBULLET
®
PRODUCT WARNINGS CAN
RESULT IN SERIOUS BODILY
INJURY; NEVER FOLLOW
PREPARATION INSTRUCTIONS
THAT CONTRADICT
NUTRIBULLET
®
PRODUCT
WARNINGS. CERTAIN
INGREDIENTS UNDERGO
CHEMICAL REACTIONS
WHEN MIXED. BLENDING
SUCH INGREDIENTS IN YOUR
NUTRIBULLET
®
CAN CAUSE
PRESSURISATION THAT MAY
RESULT IN SERIOUS BODILY
INJURY OR PROPERTY DAMAGE.
FOR THE SAFE OPERATION OF
YOUR UNIT, ALWAYS BE MINDFUL
WHEN COMBINING INGREDIENTS,
AND BE SURE TO FOLLOW
ALL NUTRIBULLET
®
PRODUCT
WARNINGS AS WRITTEN IN THE
PRODUCT USER GUIDE.
• Always consult your physician
regarding health and nutrition
concerns and advice. The
information contained in this
User Guide, any accompanied
guide, and/or online recipes are
general suggestions and ideals
and are not meant to replace
the advice of your physician.
CARE AND MAINTENANCE:
• ALWAYS follow recommended
maintenance and care
instructions in the User Guide.
WARNING! NEVER OPERATE
YOUR NUTRIBULLET
®
WITH
DAMAGED COMPONENTS
WHICH CAN PRESENT SAFETY
HAZARDS THAT MAY CAUSE
PERSONAL INJURY OR DAMAGE.
IF YOUR NUTRIBULLET
®
MALFUNCTIONS IN ANY WAY,
IMMEDIATELY DISCONTINUE
USE AND IF YOU HAVE
COMMENTS, QUESTIONS,
OR CONCERNS PLEASE VISIT
BULLETBRANDS.COM.AU /
BULLETBRANDS.CO.NZ OR
CONTACT CUSTOMER SERVICE.
SAVE THESE
INSTRUCTIONS
! !
1110
Contents
02 Important safeguards
12 What’s included
13 Assembly guide
14 Control panel
16 Blending with the Pitcher
16 First-time setup
17 Using the blender
20 Care & maintenance
21 Replacement parts
22 nutribullet Power Core
™
Blender
one-year limited warranty
Thank you for purchasing the nutribullet Power Core
™
Blender.
1312
Product confi gurations may vary. To see our full list of nutribullet
®
accessories,
please visit bulletbrands.com.au / bulletbrands.co.nz
motor base
pitcher lid with vented lid cap
72oz pitcher
MAX
L
ML
MAX
LIQ.
MAX
LIQ.
MAX2130
2000
1750
1500
1250
1000
750
500
2
1.5
1
0.5
MAX
L
ML
MAX
LIQ.
MAX
LIQ.
MAX2130
2000
1750
1500
1250
1000
750
500
2
1.5
1
0.5
What’s included
motor base
pitcher lid with
vented lid cap
2.1L pitcher
Assembly guide
spout
control
panel
pitcher lid
with vented
lid cap
integrated blade
pitcher
motor base
suction feet
1514
Control panel
PULSE
For controlled chopping
and processing.
SMOOTHIE
Automatically blends ingredients
in a timed cycle to create
smooth, consistent drinks.
POWER BUTTON
The Power Button turns the
blender on (light indicates
power). Always turn o and
unplug the blender when not
in use.
control - smoothie
control - pulse
LOW
For mixing thin batters, gravies,
and marinades, scrambling
eggs, and processing cooked
foods or raw fruits.
MED
For creaming soups, mixing
dips, grinding nuts, and
blending sauces, spreads,
drinks, and milkshakes.
HIGH
For liquefying thick mixtures
and blending frozen fruits
or vegetables.
control - low
control - med
control - high
Select your speed on the control panel and press once to activate.
17
16
MAX
L
ML
MAX
LIQ.
MAX
LIQ.
MAX2130
2000
1750
1500
1250
1000
750
500
2
1.5
1
0.5
Blending with
the Pitcher
First-time setup
WARNING! STEAM AND
SPLASHES CAN BURN YOU.
ALWAYS KEEP THE PITCHER LID
AND VENTED LID CAP ON WHEN
BLENDING HOT LIQUIDS.
FILL ONLY UP TO THE MAX LINES
FOR LIQUIDS AND SOLIDS.
START AT LOW SPEED, THEN
INCREASE ONCE THE MIXTURE
IS SMOOTH AND STEADY.
1 Unbox the Motor Base and
all attachments; place them
on a fl at, dry surface.
2 Rinse all detachable parts.
All parts except the Motor
Base are dishwasher-safe or
can be hand-washed with
warm, soapy water. Wipe the
Motor Base with a damp cloth.
Using the blender
1 Set the Motor Base on a
clean, dry, level surface.
Ensure the rubber suction
feet are secured to the
surface for stability.
3 Attach the Pitcher Lid with
cap to the Pitcher, aligning
the rear loop (opposite the
spout) with the handle.
4 Lower the Pitcher straight
down into the Motor Base,
aligning the Pitcher’s studs
with the grooves on the
base. There will be a click
when the Pitcher is placed
onto the Motor Base.
2 Place the Pitcher on a
clean, dry, level surface.
Add ingredients without
exceeding the MAX line.
motor base
motor base
motor base
Attach the Pitcher Lid with cap to the Pitcher, aligning
the rear loop (opposite the spout) with the handle.
MAX
L
ML
MAX
LIQ.
MAX
LIQ.
MAX2130
2000
1750
1500
1250
1000
750
500
2
1.5
1
0.5
Remove the Pitcher from the Motor Base.
MAX
L
ML
MAX
2130
2000
1750
1500
1250
1000
750
500
2
1.5
1
0.5
MAX
LIQ.
MAX
LIQ.
PLEASE KEEP THESE
IMPORTANT SAFEGUARDS
IN MIND WHEN USING
THE APPLIANCE:
• Plug in the Motor Base
before use.
• Always attach the Pitcher
Lid and Vented Lid Cap
before blending.
• Never run the blender
while empty.
• Do not put accessories in
the microwave.
• Never leave the blender
running unattended.
• Be extra careful when
blending hot liquids.
1918
5 Plug the power cord into
an electrical outlet.
7 To blend continuously,
locate your desired speed
on the Control Panel and
press once to start. The
blender will run at that
speed until paused or
stopped, and you can
change speeds at any time.
To pause, press the
selected speed button
again: the setting light will
turn o and the unit will
stop until you choose a
new setting to resume.
6 Press to turn on the
blender. The blending
mode lights will illuminate
in sequence from left to
right when the unit is
powered on.
10 Press again to power o
the unit completely before
lifting the Pitcher from the
Motor Base. Remove the Lid
before pouring your mixture
into your desired vessel.
9 Press the to stop
blending and wait for the
blades to stop spinning.
The will remain lit,
indicating the blender is
in idle mode.
WARNING! Blades are
sharp. Never put your
hands in the Pitcher.
8 For pulsing, press and hold
the PULSE button. The
blender runs only while
the button is held, giving
you precise control over
blending time and texture.
NOTE: To add ingredients while
blending, select LOW speed, then
remove ONLY the plastic cap
from the Vented Lid to open the
vent, leaving the rest of the Lid
attached. Add ingredients through
the opening, then replace the Cap
and increase speed as desired.
Never add items through the
vented opening when blending
hot ingredients.
NOTE: If you need to dislodge or
redistribute stuck ingredients at
any point during blending, be
sure to completely power o and
unplug the unit, ensuring blades
have come to a full stop, before
opening the Lid and loosening
ingredients. If using a utensil to
dislodge ingredients, ensure it
is completely removed from the
pitcher before reattaching the Lid
and resuming blending. If sticking
persists, add more liquid to
your blend.
Plug the power cord into an electrical outlet.
MAX
L
ML
MAX
2130
2000
1750
1500
1250
1000
750
500
2
1.5
1
0.5
MAX
LIQ.
MAX
LIQ.
Select your speed on the control panel and press once to activate.
Select your speed on the control panel and press once to activate.
Select your speed on the control panel and press once to activate.
Select your speed on the control panel and press once to activate.
MAX
L
ML
MAX
2130
2000
1750
1500
1250
1000
750
500
2
1.5
1
0.5
MAX
LIQ.
MAX
LIQ.
Remove the Pitcher from the Motor Base.
Select your speed on the control panel and press once to activate.
2120
Care & maintenance
WARNING: NEVER PUT THE
MOTOR BASE IN WATER.
WARNING: BLADES ARE
SHARP! HANDLE WITH CARE.
To order additional parts
and accessories, please
visit our website at:
bulletbrands.com.au /
bulletbrands.co.nz
or feel free to contact
Customer Service.
Use only genuine nutribullet
®
attachments/accessories
specifi cally designed for
your nutribullet
®
device.
Aftermarket parts are
not made to nutribullet
®
specifi cations and may
damage your unit or cause
serious injury.
Replacement
parts
motor base
CLEANING YOUR NUTRIBULLET
POWER CORE™ BLENDER:
MOTOR BASE:
PITCHER:
1 Always turn o and
unplug the blender before
touching it. Wait until all
parts stop moving.
2 Remove the Pitcher from
the Motor Base.
2 Clean the Motor Base and
Pitcher as described in the
cleaning instructions.
• Do not take apart the
Motor Base.
• Wipe the Motor Base with a
sponge or cloth and warm
soapy water damp cloth.
• For leaks, wipe with a damp
sponge and warm water.
• Use a small brush if needed
to clean around the
actuator system.
• The Pitcher is dishwasher-
safe. Rinse and scrub with a
dish brush before placing it in
the dishwasher.
• DO NOT use the sanitize
cycle; high heat can warp
the plastic.
• You can also hand-wash with
soap and water. Scrub
stuck-on food with a brush
or sponge.
STORAGE:
• Regularly check for cracks
or damage. Replace if
damaged.
• Never use a Pitcher that
doesn’t fi t correctly on the
Motor Base. This can cause
separation and injury.
• Store the Pitcher upright with
the Lid on.
• Do not put anything on top
of the Lid.
• Keep other parts in a safe
place where they won’t
get damaged.
750
500
0.5
1750
1500
1250
1000
750
500
1.5
1
0.5
one (1) year limited
replacement warranty
statement.
If your product becomes
defective due to faulty
material or workmanship
within a period of 1
year from the date of
purchase, we warrant
to do the following:
• For New Zealand Consumers: We
will replace the product with a
new product, free of charge, or
repair the product at our cost, at
our discretion.
• For Australian Consumers: Our
goods come with guarantees that
cannot be excluded under the
Australian Consumer Law. You
are entitled to a replacement or
refund for a major failure and
for compensation for any other
reasonably foreseeable loss or
damage. You are also entitled
to have the goods repaired or
replaced if the goods fail to be of
acceptable quality and the failure
does not amount to a major
failure.
YOUR WARRANTY
IS SUBJECT TO THE FOLLOWING
CONDITIONS:
• DO NOT operate the appliance
with a damaged plug or cord,
or if the unit has been dropped,
damaged or dropped in water.
To avoid the risk of electric
shock, do not disassemble or
attempt to repair the appliance
on your own. If the supply cord
is damaged, it must be replaced
by a qualified electrician in order
to avoid a hazard. Incorrect re-
assembly or repair can
cause a risk of electric shock
or injury to persons when the
appliance is used.
• The item has not been misused,
abused, neglected, altered,
modified or repaired by anyone.
• The item has been subjected to
fair wear and tear.
• The item has not been used
for trade, professional or hire
purposes.
• The item has not sustained
damage through foreign objects,
substances or accident.
YOUR WARRANTY
DOES NOT COVER:
• Components that are
subject to natural wear
and tear caused by
normal use in accordance with
operating instructions.
• Unauthorised/improper
maintenance/handling or
overload is excluded from this
warranty.
• For guarantee claims, you
will need to submit a proof of
purchase in the form of a valid
receipt that displays date and
place of purchase.
NEW ZEALAND
PO Box 100-707
NSMC
Auckland 0745
0800 232633
bulletbrands.co.nz
AUSTRALIA
PO Box 574
South Morang
Victoria 3752
1300 285538
bulletbrands.com.au
nutribullet
®
is a registered trademark of CapBran Holdings, LLC.
Copyright © 2026 CapBran Holdings, LLC. All rights reserved.
Los Angeles, CA 90024, USA. Made in China.
This warranty does not replace
but is in addition to your statutory
rights.
This warranty does not apply
to accessories supplied with
the item.
This warranty applies only to the
original purchaser and may not
be transferred.
Replacement items will be
covered by the limited warranty
for the balance of the warranty
period from the date of the
original purchase.
PLEASE NOTE:
Only the defective product or parts
returned to place of purchase will
be replaced under this warranty.
Capital Brands Distribution, LLC | All rights reserved.
nutribullet
®
and the nutribullet
®
logo are trademarks of CapBran Holdings,
LLC registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving
to improve our products, therefore the specifications contained herein
are subject to change without notice.
NBF07100_260225
