smart watch
B1 Ultra
User Manual
1.Please read the instruction manual below before use, in order to install the SIM
card properly and use the product easily.
2.The product pictures displayed in the manual are for illustration only, please refer
to the actual product.
1) SIM card installation method:
1.Prepare a Nano SIM card.
2.With the watch turned off, take out the card tray with a tool. Insert the SIM
card in the direction of the card tray, and finally push the card tray into the card
slot together with the card.
3.Caller display function and data flow must be opened (Data flow is not less
than 50M per month).
Note: It is strictly forbidden to poke the microphone hole next to the SIM
card tray with a needle.
2) How to Use the watch:
1.Power on: hold the power button for 3 seconds to start the watch.
2.How to power off:
(Option 1) Press and hold the power button to pop up a new page, click the
‘Shutdown’ icon
(Option 2) by APP: ‘Function’ / ‘Remote Power Off’
3. Battery Charge: Fully charge the battery before first use.
Use the magnetic charging lead to attach to the back
of the device (it will only connect one way), the other end is connected to a
usb charger, which supports output DC 5V~1A.Please do not use a charger
with an output voltage exceeding 5V, it will damage the device.
4. Switch and clean up background apps:
Press and hold the power button to pop up a new page, click the menu icon to
switch or clean up background apps.
5. Volume adjustment:
Press and hold the power button to pop up a new page, Click the speaker
icon to adjust the volume.
Note:
(1) About one minute to read the SIM card information after power on,
the signal is normal, automatic timing.
(2) If the watch cannot be turned on normally, please check whether
the watch has electricity, if there is no electricity, please charge it
in time and turn it on again.
(3) If the card is not inserted or the card cannot be read after power
on, you can re-insert the card or replace the SIM card, and then
restart to confirm the card reading.
(4)Make sure you're using the magnetic charging cable that came
with your watch. Using other charging cables may damage your
watch.
3) Download and install the App:
(Option1) - Scan the following QR code,
download and install the App
(Option 2) - Scan code to download in the GPS watch in ‘QR Code’
(Option 3）-Search “MiWiTracker” in App Store - Apple or Google Play
Note: During installation, the phone prompts whether to trust the APP or
whether to allow prompt access to phone location, etc. Please
select trusted and allowed all the time.
4) Registering the watch and log in:
Open the App, new users will need to register a new account by clicking on the
bottom left “Register” button, complete the registration steps.
5) Connecting the watch to your APP account:
After successful registration, login to the account, select ‘+’ Add watch, scan
the QR code on the watch.
Note: During the process, the phone prompts whether to trust the APP or
whether to allow prompt access to phone location, etc. Please
select trusted and allowed all the time.
6) Product Features:
1.Real-time GPS, WIFI & CELL location
2.Historical track, Geofence
3.Calling (Contacts, SOS, two-way communication)
4.Voice Chat message
5.Camera function[*Optional, only for devices with a camera]
6.Health pedometer
7.Location Update Modes
8.Clock
9.Heart Rate[*Optional, only for devices with heart rate]
10.Do Not Disturb
11.Other settings and functions
7) Function Description:
1. Location Update Schedule Modes:
There are two location update modes. User can combine the two modes to
better experience location services.
(1).Manual positing: Click ’Refresh’ in the real-time location map interface
of APP or click ’Function’’Real-time Position’ to update current location
information,and the watch will report the up-to-date position as soon as possible.
(2).Real-time positing: Updates location data to APP according to the set
interval when there is continuous movement.
Note: ①User can click’Function’’Upload Interval’ to set the device
upload interval in minutes.The value should be an integer between 1
and 86400
②The default interval of real-time positioning mode is 10 minutes
③ In the real-time positioning, the watch will regularly update the
location on the APP Map page and History
2. Historical Location Playback:
In the real-time location map interface of APP, click the ‘History’ button on the
right, you can check the location history playback.
3. Geo-fence (safe area):
This feature defines a Geo-fence (safe area) perimeter and sends the user a
push notification if the tracker has left or entered the safe area.
Click ‘GeoFence’ Click the "+" icon in the upper right corner Click and
drag the map to set the centre point Drag to set the coordinates coordinate
area range Click ‘√’ at the top right Enter fence name Click confirm to
save .
Note:
(1)App will show enter or leave geofence alarm information (Click
‘Mine’ ‘message’).
(2) After the watch uploads the location, the APP can judge whether to
enter or exit the geofence.
4. Calling:
(1)Phone Book:
①Add a contact: Click APP ‘Function’Set phone book Click the ‘+’ icon
Insert name, number , and finally click ‘SAVE’ to save.
②Edit Contact:Click APP ‘Function’Set phone book drag to select the
number you want to edit Save after editing
③Delete Contact: Click APP ‘Function’Set phone book drag the number
you want to delete Click ‘Delete’ (delete information will be synchronized
in both of watches and app).
(2)Call:
①Use phonebook to call: Click ‘Contact’ icon in the watch to view the
contact list, slide up and down to select a contact to Call.
②One Button SOS:In case of emergency, press and hold the power button
to pop up a new page, click the ‘SOS’ icon. At this time, the watch will call
the 3 preset emergency numbers circularly.
③Call dialing: Click the ‘Phone’ icon in the watch, enter phone numbers
manually, the telephone dial-out.
5. Chat features:
(1) Voice message:
①From APP send to watch: Click “Chat” in main page of APP, voice can be
sent to the watch.
②From Watch send to APP: Click the ‘Chat’ icon in watch - holding down the
talk button to speak - release your finger to complete the recording.
6. Health pedometer steps:
Pedometer feature set: APP Function Steps Setting Click ‘+’ icon to add
pedometer period of time, and click save.
7. APN settings:
The GPS watch by default has most of the APN information, however if you can
call and receive SMS but cannot get the GPS watch online from the beginning
of unboxing, then you need to set up APN. Ask your carrier about APN
information, and set in the GPS watch. Or you can check your SIM card APN
information by installing SIM card in a mobile phone, check APN in the network
profile page in settings of mobile phone.
How to set APN in the GPS watch: Settings Network & Internet Mobile
networkAdvanced Access Point Names ‘+’ fill in APN
informationsave. User needs to fill out: Name, APN name, MCC, MNC.
Keep the rest as default.
Note: Each operator's APN information is different; please contact the
operator for their APN and MCC, MNC information.
8) Adding a secondary administrator account:
The first account created for the GPS Watch is the primary administrator
account. You can add a secondary account to the app for two parents, as an
example, to be able to login. Adding a secondary administrator account requires
authorization from the primary administrator, there will be a note when the
secondary administrator account wants to add the same GPS tracker, the
primary administrator will also receive the authorization notification.
Note: One APP account can bind multiple GPS trackers; while one GPS
tracker can also be connected with multiple secondary accounts
with the authorization from primary administrator.
A prompt will appear inside your (the main administrator) App account for
authorization after the secondary administrator has scanned the same watch QR
code into their App.
9) Deleting a GPS watch from the APP account
APP Mine Devices list Select the device you want to delete Unblind
‘Only untie yourself’ or ‘Untie all contacts’.
Declaration:
• If you are removing or tampering with the product casing, the product will
void the warranty.
• The manufacturer shall not be liable for illegal use of the product.
• By using this GPS tracker, you acknowledge that you accept the following
precautions terms. In the event that you do not understand or accept any
of the precaution terms herein, you should discontinue your use of this
GPS Tracker.
Precautions
1. Do not immerse the product in liquid or chemicals such as salt water and
detergents.
2. Do not wear the product in the shower, in case different PH range of
shower gel, shampoo and conditioner, or hot water damages the GPS
tracker.
3. Keep the product away from fire, heat and other extreme high
temperature environments;
4. Keep out of children’s mouths;
5. Use only 5V chargers or USB ports, higher voltage may damage the
device;
6. Do not directly attach the magnetic charging lead to any metal or
conductive objects except the GPS Tracker, otherwise it may cause the
charging head to short circuit.
7. In the case of excessive heating of the battery during charging,
immediately disconnect it from the power supply.
8. Before first use, fully charge the battery.
9. If the watch heats up when wearing it, immediately take it and and turn the
watch off either via the watch settings or in the App.
10. Never connect to a mechanically damaged charger or if the batteries are
swollen. Do not use batteries in this condition due to risk of explosion.
11. When this product is in a de-energized state and outside the service area,
location function does not work.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the
FCC with the smart watch transmitting at its highest certified power level in
all tested frequency bands, although the SAR is determined at the highest
certified power level, the actual SAR level of the smart watch while
operating can be well below the maximum value. Before a new model smart
watch is a available for sale to the public, it must be tested and certified to
the FCC that it does not exceed the exposure limit established by the FCC,
tests for each smart watch are performed in positions and locations as
required by the FCC.
For body worn operation, this model smartphone has been tested and meets
the FCC RF exposureguidelines when used with an accessory designated for
this product or when used with an accessory that contains no metal and that
positions the smart watch a minimum of 0 cm from the body.
Non-compliance with the above restrictions may result in violation of RF
exposure guidelines.
Head: 0.474 W/kg
Body: 0.607 W/kg
