113
user manual
SPEAKER
Product specifications:
●BT:V4.2
●Suppot:L2CAP/A2DP(AVCTP/
AVDTP/AVRCP),can receive
AUDIO signal and control the
AUDIO device.support HSP/HFP
(Handsfree profile),Built-in Mic for
hands-free phone call
●Working distance:10M
●SNR:≥90db
●Battery:
4
00MAh
●Built-in voltage:3.7V
●Normal volume playing time:3H
●Speaker driver:52mm*2
●Power:4Ω/5W*2
●Frequency response:150 Hz-20KHz
●Unit size:75.5*75.5*161.6mm
●Unit weight:about 492g
●Charging:5V/500mA-2A
Product Feature:
1.Advanced Wireless audio decoder
chip,supportall Wireless devices
connected;
2.Support FM radio,you can search
area stations directly;
3.Soft,clear and dynamic sound,all
levels clear;
4.Reading TF card and USB card
directly;
5.The wireless transmission range
can be up to 10 meters;
6.Support LINE IN audio input,
provide you with computer speakers.
Can be connected to mobile phone,
tablet computer and TVWireless
pairing playing music.
key &slot function:
1.Power switch:Press long to open,
press long again to close.
2.DC5V charging interface.
(Micro USBV8 charging interface)
3.TF slot:it can decode and play MP3
format audio when put TF card into
the slot.
4.USB slot:it can decode and play
MP3 format audio when put USB
card into the slot.
5.LINE IN input interface:3.5 audio
sound input.
6.In music mode:
Press short for last song,
presslong to turn down the volume.
7.In music mode:
Press short for next song,
presslong to turn up the volume.
8.When play music(USB card/TF
card/LINEIN/Wireless),
press short for “play/pause”,In
FM mode,press short to auto search
station,press short again to stop
searching,under Wirelessmode
with mobile paired,press short to
answer a call,press again to hand up,
press Twice to disconnect.
9.In Music mode(TF card,
LINE IN,USB card,Wireless),press
short to switch function mode.
NOTE:
Under FM mode,please put in the
AUX cable to get better FM radio
station
⑨
①
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio
frequency
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
may cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
that interference
will
not
occur
in
a
particular
installation.
If
this
equipment
does
cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off
and
on,
the
user
is
encouraged
to
try
to
correct
the interference
by
one
or
more
of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any
changes
or
modifications
to
this
device
not
explicitly
approved
by
manufacturer
could void your authority to operate this equipment.
This
device
complies
with
part
15
of
the
FCC
Rules.
Operation
is
subject
to
the
following
two
conditions:
(1)This
device
may
not
cause
harmful
interference,
and
(2)
this
device
must
accept
any
interference received, including interference that may cause undesired operation.
This
equipment
complies
with
FCC
radiation
exposure
limits
set
forth
for
an
uncontrolled
environment.
This
equipment
should
be
installed
and
operated
with
minimum
distance
0cm
between the radiator and your body.
