Model :
16138000A48814
6348475901
AW-DM1100PM(SG)
AW-M1100PM(SG)
Fully Automatic
Washing Machine
OWNER’S MANUAL
1
CONTENTS
SAFETY INSTRUCTIONS
Safety instructions ...................................... .................................
INSTALLATION
Product description ............................................ .......................
Installation area ................................................. .. ... .....................
Unpacking the washing machine ..................... ....................
Levelling the washing machine ..............................................
Selection of tap .................................................... ... ......................
Connection of inlet hose, tap and washing machine......
Preparation before washing................................. ....................
Washing
.......................................................... ....... .... ......................
After washing................................................. ...... .... ......................
Washing matters needing attention ................ .....................
The usage of detergent and washing powder.... ...............
Control pan ...........................................................el ......................
Option............................................................ ... .......... ......................
Personalized setting of washing ...... ... ......course .......... ......
Operations of washing process................ ...............................
Washing table .............................. ........course .......................
Maintenance
Cleaning and care .............................................. ..........................
Cleaning the cabinet............................................ ... .... ................
Trouble hooting.................................................. ... ..s .................. ...
Technical ...................................... . .......specications . ..............
2
8
9
9
10
11
11
12
12
12
13
13
14
15
16
16
17
19
19
20
21
OPERATION
Cleaning inlet lter .................................. ....the ........................
19
18
Recommended detergent amount.............................
Energy eciency test program . ...................................... . .......
21
2
SAFETY INSTRUCTIONS
For your safety, the information in this manual must be
followed to minimize the r e or explosion, electric
shock, or to prevent property damage, personal injury or
loss of life.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• The new
hose-sets suppli
ed with the appliance are to
be used and that old hose-sets should not be reused.
• The openings must not be obstructed by a carpet.
• This appliance is intended to be used in household
and similar applications such as:
environments;
- farm houses;
- by clients in hotels, motels and other residential type
environments;
- bed and breakfast type environments
areas for communal use in block of ats or in
launderettes.
SAFETY INSTRUCTIONS
3
Model
Washing Capacity
Standard Water Pressure
Explanation of the symbols:
Note!
This combination of symbol and word
indicates a potentially dangerous situation which may
result in slight or minor injuries.
descriptive
Warning!
This combination of symbol and word
indicates a potentially dangerous situation which may
result in death or serious injuries unless it is avoided.
descriptive
Caution!
This combination of symbol and word
indicates a potentially dangerous situation which may
result in slight or minor injuries or damage to property
and the environment.
descriptive
10.0kg
AW-DM1100PM(SG)
AW-M1100PM(SG)
0.03MPa ~ 0.8MPa
10.0kg 0.03MPa ~ 0.8MPa
4
SAFETY INSTRUCTIONS
The electric shock!
•
• Do not put washing machine humid place.
• Hands not be inserted into .
• Before maintenance the , unplug the
appliance from the
• Always unplug the machine and turn off the water supply
after use. Be aware of the maximum and minimum inlet
water pressure which is in megapascals (M a)
• To ensure your safety, power plug must be inserted into
an earthed three-pole socket. Check carefully and make
sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices
are connected by a qualified technician in accordance with
the manufacturer's instructions and l
ocal safety regulations
·This product is used only domestic.
This is for indoor use only.washing machine
this in a
should the rotating drum
doing any unit
electrical source.
provisions
P
Warning!
• he appliance used by children
with reduced physical sensory or mental capabilities or
lack of experience and knowledge if they have been
given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be by
children without supervision.
• Animals and children climb into the machine.
Check the machine before every operation.
• should be supervised that they do not play with
the appliance.
• Keep children and far away from the machine
during operation.
T
done
can
can not be
not
Children
animals
and persons
Risk of explosion!
•
washed in, soaked in, or dabbed with combustible or
explosive substances( such as wax, oil, paint, gasoline,
degreasers, dry-cleaning solvents, kerosene, etc.) This may
result in re or explosion.
• Rinse the clothes or wash articles thoroughly by hand
putting them in the appliance .
Do not wash or dry articles that have been cleaned in,
.
before
5
SAFETY INSTRUCTIONS
Risk to children!
• This washing machine is for indoor use only.
• built-in using.It is not intended for
• The openings must not be obstructed by a carpet.
• ashing machine shall not be installed in bath room
or very wet rooms as well as in the rooms with explosive
The w s
or caustic gases.
• Remove all before using
Otherwise, serious damage may result.
packaging materials the appliance.
• The wa shing machine with s ingle inlet valve may only
connected to a cold water supply. be
• The plug must be accessible after installation.
• Avoid place where the machine is exposed to direct
sunlight .Plastic parts may become deformed or discolored .
Avoid plac
e where the machine may become frozen
during cold weather.
Risk of damaging appliance!
6
SAFETY INSTRUCTIONS
Caution
Installing the product!
• Your product is only for home use and is only designed
fo extiles suitable for washing machine.
• Do not climb up and sit on top cover of the machine.
• Cautions during Machine Handling and transport:
1.The accumulated water shall be drained out of the
machine.
2.Handle the machine carefully. Never hold
part the machine while lifting.
• Please do not close the
• It is forbidden to wash carpets.
r t
the
protruding
s of
top lid with excessive force.
3.This appliance is heavy, it should be transported carefully.
Operating the appliance!
• Before washing the clothes first time, the product for the
shall be operated without clothes using tub clean as the
recommended program
• Flammable and explosive or toxic solvents are forbidden.
Gasoline and alcohol etc. Shall not be used as detergents.
Please only select the detergents suitable for washing
emachine, specially for top-loading fully automatic washing
machines.
• Make sure that all pockets are emptied. Sharp and rigid
items such as coins,
may cause serious to this machine.
brooches, nails, screws or ston s etc.
damage
e
• Never rell the water by hand during washing.
7
SAFETY INSTRUCTIONS
INSTALLATION
Product description
• ll illustrations in this manual are for reference only.
lease refer to the product ,for actual appearance of the parts
A
P .
Note!
8
Accessories
Inlet hose assy manual
screw
cabinet baseboard
Adjustable foot knob
Glass lid
Drum
Frame
Control panel
Cabinet
Water inlet valve
Power and plug cord
Handle
Drain hose
AW-DM1150P-IND
16138000A45476
6348459101
Installation Area
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0 C
5.Keep far away from such as coal or gas
as
fuel sources
Unpacking The Washing Machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and
drain hose.
4. the inlet hose from the drum.Pick up
•
•
the
Stability is important to prevent the product
from !
Make sure that the product not stand on
power cord.
moving
dose
Warning!
•
be
•
Packaging material (e.g. Films, Styrofoam) can
dangerous for children.
Thereisariskofsuffocation!Keep all packaging
well away from children. materials
Warning!
9
INSTALLATION
w
w
W> 20mm
Note:
with the unit. will cause damage to the machine
Do
It
not operate the washing machina with the base packing still intact
.
Note!
Levelling the washing machine
10
The way to place the end of drain hose:h r
Do not kink protract or compress the drain hose.
Position the drain hose properly, otherwise, improper position may
result in water leakage.
If drain hose is too long, do not force it into washing machine as this will
cause abnormal noises.
Warning!
water trough
Less than 3m
Less than 15cm
1. Check if the feet are properly attached to
the cabinet. If not, please rotate them to
their original position and tighten the nuts.
2. Check alignment of the product with a
leveler and do the succeeding steps if
necessary.
3. Loosen the lock nut and rotate the foot
either clockwise or counter clockwise,
until it closely contacts with the oor.
4. Assure that the lock is secure and then
alternately press the four top corners of the
machine, to check if the proper adjustment
has been done.
•
Warning!
Lock nut
foot
Raise
Lower
lockloosen
right
wrong
INSTALLATION
Drain direction
Left or right style
Picture
Left
Right
The lock nuts on two feet must be screwed tightly against the housing.
11
Wall
Slide bushing
1:Connection between ordinary tap and inlet hose.
2:Connection between screw tap and inlet hose.
• To prevent leakage or water damage, follow the instructions
Do not kink, crush, modify or cut the .
above-mentioned !
• water inlet hose
Warning!
Selection of tap
Please select
tap.
appropriate
Connection of inlet hose, tap and washing machine
clamp nut
tap
1.Loosen clamp nut
to show 5mm groove
2.Loosen four
screws
3.Set connecting base
on tap and tighten
evenly screws
4.Tighten clamp nut
inlet valve
inlet hose
slide bushing
5.Press slide bushing,
insert inlet hose into
connecting base
6. onnection
C 7.After connection and installation,
check if there is water leakage
tap with threads and inlet hose
special tap for washing machin
e
Screw tap
Special washing
machine tap
Ordinary tap
INSTALLATION
5mm
Caution!
Before washing, please make sure installed properly.
Before washing first time, the washing machine shall be operated
•
•
that the unit is
for the
without clothes using tub clean as the recommended course.
Open tap
Plug in
Add detergent
After Washing
1 2 3 4
Washing
Power On
Start up
1
12
load and Close lid
The buzzer will beep after washing finished and the power supply will be cut off
automatically . unload the laundry.
At this point , you may
3
Preparation Before Washing
OPERATION
A complete cycle is as shown below
2
• Water level can be selected manually .
Note!
Select Course
• In the case of Liquid det rgent , t is used by this case .e i
Note!
Liquid detargent Case
Tie tassels into Knot, fasten
zippers and buttons
• Washing a single piece of clothing may cause , severe unbalance and
consequently sound an alarm. In this case, it is suggested to add one or two
more pieces of clothing to the wash load that will also make smoother.
• Do not wash clothes stained with kerosene ,touching gasoline, alcohol and
other flammable materials.
spinning
• Before washing , lease check the clothes labels and the detergent usage
instructions. se low-density detergent before wash suitable for washing
machines .
p
U
Take items out
of the pockets
Put small clothes into a
laundry net
Check the label
Washing matters needing attention
Turn the following clothes
inside out those that easily
form fiber on its surface and
those with long strands of fiber
Segregate clothes with
varying textures or materials
Warning!
13
• As for powder detergent that can form into clusters or masses, it is suggested
to dilute the detergent some water ,before pouring into the detergent
box, this will prevent the inlet of the detergent box from clogging and water
from over flowing during the filling process
• Choose the suitable type of detergent for the various washing temperature
to get the best washing effect with less water and energy consumption.
with
.
The usage of detergent and ashing powder w
OPERATION
Control Panel
14
OPERATION
On/Off
Start/Hold
Available according to the
laundry type.
Option
This allows you to select an
additional function and will light up
when selected.
Note!
This is for reference only. Please refer to the product ,for
actual appearance.
• illustration
1
4
2
3
The display shows the settings, estimated , options, and status
messages for your washer. The display will remain on the cycle.
remaining time
throughout
5
1
2
4
The washing machine will select the water level automatically according
to the load weight.
1. When there's water in the tub, this function is not available.
2. Before [Start/ ] button, if selected the water level,
there will be no fuzzy function.
3. After [Start/ ] button, the washing machine will run the
fuzzy function.
pressing
weighing
pressing
weighing
Hold
Hold
the user
4
5
4 4
3
4
4
6
6
Fuzzy
Display
Course
T off.urns the unit on and
Press button to start or
the washing cycle.
this Hold
Note!
REGULAR ,JEANS ,MEMORY, HEAVY WASH course has fuzzy function.
Option
15
OPERATION
select water level according to clothing categories, degree of soiling
and washing habits of
the
users
washing time, number of rinses , spinning time and other settings
can be selected
Function
To select one of the following functions, Soaking , washing, rinsing or spinning
Only for having these . models functions
Water level
Wash /Rinse /Spin
+
Start
The GREAT WAVES lit
On
CHILD PROOF
To avoid mis operation by children.
Start
To activate press
the two buttons at the same time
CHILD PROOF
On
Preset
1. Select a course
2.Press the button to choose the time before operation startsPreset start
3.Press [
Start/ ] to commence the operationHold Preset
Choose the course
Start
On
Setting timepreset
Press the [ ] button repeatedly , to see time choices , he time
should be set before starting the . If you want to set the time ,
after the has already started on should be pressed to
reset the
Preset Preset Preset
Preset
t
course
course
course
Caution!
If there is any in the power supply while the machine is operating,
a special memory stores the selected program and r
when the power is restarted.
interruption
ecalls the memory setting
•
• The “ CHILD ” will lock all buttons except [ On/O ].
If this mode is set to ON and the lid opened during operation, he buzzer beeps ,
the indicator flashes , the washer stops water supply and stops wash/spin operation,
and drains water from wash tub approximately 20 seconds of the lid opening.
t
PROOF
Caution!
GREATWAVES is able to shorten wash time by special rhythm and
water flow.
16
OPERATION
Water Level
Course
Personalized setting of washing course
The user
number of rinses start time.
can select washing according to the actual need, and set washing
time, , spinningtime, water volume and
course
course
The user can set a single process or combinations of washing, rinsing and
spinning freely according to the need. Detailed operations are as follows
for different models:
Note: other process combinations are similarly set, as the above examples.
Operations of washing process
Wash
StartOn
+
Set soak/washing/spinning
time,rinsing times
On Start
Note!
Preset
You can choose the following parameters : SOAK:0,10,20,30,40,50,60minutes
WASH 15 20minutes RINSE 1-4times SPIN:1 9minutes.: - : -
Soak
On
Press the PROCESS button
Start
R
Spin
inse
On
Start
Press the SET button
Set soaking time
Press the PROCESS button Press the SET button
Set washing time
Press the PROCESS button Press the SET button
Set of rinsestimes
On
Start
Press the PROCESS button Press the SET button
Set timespinning
17
Washing TableCourse
OPERATION
Course
REGULAR:
Standard fabric washing program, suitable to fabric.wash cotton
Washing is done once, twice for rinsing and the spin time is a bit long.
SPEED:
Suitable to wash clothes and clothes summer.lightly- stained for
MEMORY:
JEANS:
Suitable to wash clothes.heavily-stained/thick
HEAVY WASH:
BLANKET :
Courses are available according to the laundry type.
Only for having these models functions:
heavily-stained/thick clothes.
The wash time is longer, the water action stronger, so the
washing effect is better.
DELICATE:
Mid/High/Low water level selection, the tempo is soft, slow
washing and spinning speed, l wear and deformation. for minima
With intermittent spinning the dirt on the inner & outer surfaces
of the drum, as well as the are removed. pulsator
TUB CLEAN:
Press "Start \ " to set the memory .To recall the memory ,press
Power on ,select the memory course and the stored cycle will come up
Hold
67L
(8gear)
55L
(6gear)
40L
(4gear)
23L
(2gear)
1kg
3kg
6kg
10.5kg
• Before your maintenance starts, please unplug the machine and close the tap.
Cleaning the cabinet
Proper maintenance the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
an y water overflow, use wet cloth to wipe it off immediately.
No sharp items are allowed.
of
a
Formic acid and its diluted solvents or equivalent are forbidden, such as
solvents or chemical products ,etc.
•
alcohol,
Warning!
Note!
19
Cleaning And Care
Cleaning the inlet filter
• Inlet filter must be cleaned if pressure of water from the inlet drops.
Wash ing the filter in washing machine:
1.
Screw off the inlet pipe from the of the
machine.
2.Pull o ut the filter with ong nose
pliers and reinstall it back after being
washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the
back
a pair of l
a brush
Note!
1.There is a built-in lint lter in your washer. It
can help to collect lint during washing cycle.
2.It is suggested to clea n the lint filter every
10 cycles.
3.Take it out and clean the filter with water.
Then place it back into the washer.
Lint lter cleaning
MAINTENANCE
Trouble Shooting
•
display shows other alarm code again, contact the service center
• E1-E4 alarm clear on some models need to be stimulated by "Start" button
After the checking, try to use the appliance again ,If problems persist or the
.
.
Note!
Description
Description
Reason
Solution
Abnormal behavior
with dangerous fault.
(brake wires,brake,sensors)
20
No washing
Inspection Items
If the power is o .
If the water reach required water level.(The washer will
not work if the water amount does not reach the required water level)
If it is set to " " washing mode. (It will only start to work until the
reservation time reached)
volume the
is
Preset
No water flows in
If the power is o or the fuse is burned out.
If the water supply is cut o or the water pressure is too low.
If the inlet hose is properly connected and the water tap is opened.
If the ltering screen of inlet valve is blocked by dirt.
If the "Start / Hold" button is pressed after the power switch is pressed.
Abnormal draining
If the end of the water drain hose is placed very high.
If the end of water drain hose is immersed in a
nd blocked by a pool of water .
Abnormal spin
If the lid is closed.
If
If the washer is not placed in stable condition or it is placed
state. (The ground is not at).
top
most of the clothing are at one side of the drum or if too many
clothes are loaded in the machine.
an inclined
E1
E7-1
E7-2
E7-3
E7-4
E7-5
E2
Check the water tap is
opened or not.
if
Check the water level
sensor and drain pump.
Alarm for abnormal
water .lling
Alarm for water unnished
water draining
Alarm for lid not closed
before wash and spin.
that is
E3
Close the lid.
E4
MAINTENANCE
Others
FXX
If the appliance does not start or it stops during the operation, initially try to find a solution
to the problem based on the table below. contact the service center.Otherwise,
Unbalanced wash load
during spinning
Evenly distribute the clothes in
the drum by hand.
Try to look for solutions first then call
for service, if no solutions work.
E7-1 E7-2 E7-3 E7-4 E7-5 appears after
pressing the power button,Please call
for service.
If E7-1 E7-2 E7-3 E7-4 E7-5 appears
during the operation , press the power
button to restart the machine.
21
MAINTENANCE
StandardWater Pressure
0.03MPa~0.8MPa
Dimension
(W*D*Hmm)
Rated
Power
Net
Weight
Washing
Capacity
Model
Power
Supply
220-240V~, 50Hz390W37kg
550x565x960
220-240V~, 50Hz450W37kg
550x565x960
10.0kg
10.0kg
AW-DM1100PM(SG)
AW-M1100PM(SG)
