User guide.
TRIPLE PREP
SYSTEM
32
Important safeguards.
When operating your nutribullet
®
Triple Prep System, remember:
SAFETY COMES FIRST. WHEN USING ANY ELECTRICAL APPLIANCE,
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED,
INCLUDING THE FOLLOWING:
WARNING! To avoid the risk of serious injury, death, property
damage, or damage to your device carefully read all instructions
before operating your nutribullet
®
Triple Prep System. When
using any electrical appliance, basic safety precautions should
always be observed, including the important information in this
User Guide.
If you let anyone else use your nutribullet
®
, make sure that they
understand the health and safety information in this User Guide,
as well as any additional safety or usage instructions provided.
Each person using a device should completely read the User Guide
to become familiar with the safe operation of the unit.
!
Save these instructions!
FOR HOUSEHOLD USE ONLY
EXTREME CAUTION should
be exercised when using
hot, warm, or carbonated
ingredients. NEVER blend
hot, warm, or carbonated
ingredients in the Cup as it
may pressurize the contents
and may erupt upon opening,
causing serious bodily injuries
or damage. ONLY USE THE
BLENDING PITCHER and
Vented Pitcher Lid to blend
hot, warm, or carbonated
ingredients. Do not blend hot
liquids when using CLOSED-
TOP Cups.
Failure to follow all instructions
regarding the use of your
nutribullet
®
Triple Prep System
may result in serious personal
injury, death, or property
damage. Be aware of possible
hazards when using or storing
your nutribullet
®
.
• Always consult your physician
regarding health and nutrition
concerns and advice. The
information contained in this
User Guide, accompanied
Recipe Guide, and/or
online recipes are general
suggestions and ideals, and
WARNING!
– NEVER blend hot or
warm ingredients in the
nutribullet
®
cups.
– Starting with hot or warm
ingredients allows more
heat and pressure to build
up when blending. This can
cause the Cup to separate
from the blade, potentially
expelling hot ingredients and
exposing the blade, both of
which can cause injuries.
– Only blend room-
temperature or refrigerated
ingredients (21°C/70°F
or cooler). After blending,
transfer mixture to a
stovetop pot to heat and eat.
• Do not use the nutribullet
®
for other than its intended
purpose.
• Do not leave or put non-
food items in any of the
attachments when blending.
Doing so may damage the
unit or crack or shatter the
attachment, resulting in
bodily injury or damage.
• Close supervision is necessary
when any appliance is used
by or near children to ensure
they do not play with the
appliance. Keep cord out of
reach of children.
• This appliance is not
intended for use by persons
(including children) with
are not meant to replace the
advice of your physician.
• If you are taking any
medications, especially
cholesterol lowering
medication, blood
thinners, blood pressure
drugs, tranquilizers, or
antidepressants, please check
with your physician before
trying any of the recipes
contained in the Recipe Guide
or published online.
ALWAYS follow recommended
maintenance and care
instructions in the User Guide.
NEVER operate your nutribullet
®
with damaged components. If
your nutribullet
®
malfunctions
in any way, immediately
discontinue use and contact
Customer Service at:
AU: 1300 285 538 /
NZ: 0800 232 633. If you have
any comments, questions,
or concerns, please go
to bulletbrands.com.au /
bulletbrands.co.nz or call
Customer Service.
BLENDING WITH
NUTRIBULLET
®
CUPS
PERSONAL SAFETY
AVOID HEATING AND
OVER-PRESSURIZING CUP.
54
reduced physical, sensory,
or mental capabilities, or
lack of experience and
knowledge, unless they
are closely supervised and
instructed concerning use of
the appliance by a person
responsible for their safety.
Do not blend for more than
one minute.
– Blending causes ingredients
to heat up, which builds
pressure in the Cup over
time. Continuous blending
for more than one minute
may cause the Cup to
separate from the blade,
exposing the blade or
expelling heated ingredients
— both of which can
cause injury.
– Do not run consecutive
blending cycles. Allow
contents to settle at least
10 to 15 minutes before
running another blending
cycle. DO NOT attempt to
open the Cup if it feels hot or
warm to the touch. See CUP
CAUTION section for details.
• Do not blend anything
carbonated or eervescent —
no bubbles.
– Carbonated and
eervescent ingredients
(soda, baking powder,
baking soda, yeast, some
batters, cake mix, dry ice,
or other things that become
bubbly) release gasses that
increase pressure within the
Cup. Pressure from released
gases can cause a sealed
nutribullet
®
Cup to separate,
resulting in possible injury
and/or property damage.
Note: Some protein powders
include eerevscent
ingredients. Always check
supplement ingredients
before adding.
• Do not overfill.
– Filling above the MAX line can
result in leakage. The cyclonic
action of the nutribullet
®
requires space to extract
eectively. Exceeding the
MAX line can result in leakage
and may create a dangerous
pressurization which can
cause the Cup and Extractor
Blade assembly to separate,
resulting in possible injury
and/or property damage.
• DO NOT leave blended foods
inside a sealed Cup.
– Blended mixtures can spoil
and ferment, increasing
pressure when left in the Cup.
– Use the To-Go Lid or transfer
to vented container for
storage after blending.
• NEVER LEAVE THE
NUTRIBULLET
®
UNATTENDED
WHILE IT IS IN USE.
• NEVER place any nutribullet
®
parts or accessories in the
freezer or use as a storage
container in the freezer.
• Make sure your nutribullet
®
is
powered o and the motor and
blades are completely stopped
before removing or cleaning
unit.
• Remove and safely discard
any packaging material or
promotional labels before
using the appliance for the first
time.
• Periodically inspect your
nutribullet
®
Cup for damage
or wear that may impair proper
function or create a safety
hazard.
• Do not operate if any of the
parts and accessories are
damaged in any manner which
may impair proper function
or create a safety hazard.
Contact Customer Service for
assistance at:
AU: 1300 285 538 /
NZ: 0800 232 633.
• Do not use parts or accessories
from other manufacturers or
dierent models of nutribullet
®
or magic bullet
®
products. Use
of parts and accessories NOT
specifically designed for your
nutribullet
®
Triple Prep System
may damage your unit or
cause serious injury.
• Do not place or operate your
nutribullet
®
on uneven
or unstable surfaces.
• The risk of fire, shock or
damage to nutribullet
®
during cleaning can be
reduced by taking the
following precautions:
– Turn o your device and
unplug before cleaning.
– Only clean the exterior of
your device.
– Clean your device with a
dry cloth.
• Do not attempt to clean the
Motor Base by immersing in
water or other cleaning liquids.
Only gently wipe and dry with
a clean cloth.
• Do not place or operate your
nutribullet
®
on or near a hot
gas or electric burner, or in a
heated oven.
NEVER wash your nutribullet
®
part or accessories using the
sanitize or heat cycle of
your dishwasher. Doing so
can warp the part, which
can create hazardous
conditions during use that
may result in bodily injury or
property damage.
WARNING!
76
injury. In addition, apple seeds
and the pits of cherries, plums,
peaches, and apricots contain
a chemical known to release
cyanide into the body
when ingested.
• NEVER attempt to open a
sealed nutribullet
®
Cup if it
feels hot or warm to the touch,
the contents may be heated
and pressurized, causing the
Cup to separate with force
when opened, which can result
in bodily injury and burns. If
the Cup feels hot or warm,
take the following steps:
1. LEAVE ALONE, DO NOT OPEN.
Leave the Cup where it is and
do not touch it or allow others
to touch it.
2. NEVER attempt to separate
the Cup from the Extractor
Blade by forcing or prying
apart the components or
applying heat, which may
crack or shatter the Cup,
resulting in bodily injury.
If you are unable to untwist
the Extractor Blade
from the Cup, contact
Customer Service.
3. DO NOT continue to blend.
4. Allow the Cup to cool for at
least 30 minutes.
5. After 30 minutes, check if the
Cup is completely cooled. If still
warm, allow to cool more.
– Use only genuine nutribullet
®
attachments/accessories
specifically designed for
your nutribullet
®
Triple Prep
System. Aftermarket parts
are not made to nutribullet
®
specifications and may
damage your unit or cause
serious injury.
• DO NOT USE OUTDOORS.
• ALWAYS UNPLUG THE
NUTRIBULLET
®
WHEN NOT
IN USE.
• To unplug, grasp the plug and
pull from the outlet. Never pull
from the power cord. Always
POWER OFF and UNPLUG the
unit and wait until the Blades
or Discs come to a complete
stop before assembling,
disassembling, changing
accessories, or cleaning.
• The use of attachments
including canning jars not
recommended or sold by the
manufacturer may cause fire,
electric shock or injury.
• Do not leave any non-food
items in the Cup when
blending. Remove all utensils
from the Cup.
• Do not blend stone fruit in
this appliance unless pits/
seeds have been removed.
Fruit pits may damage the
Cup, potentially resulting
in shattering and personal
WARNING!
• Do not attempt to disengage
the Cup from the Motor
Base if the Cup starts to leak
during blending. Leakage
can indicate that the Cup is
about to separate from the
blade, which can expose the
blade and cause laceration
injuries. If you notice leaking,
immediately unplug the unit
and allow the motor to come
to a complete stop before
removing the Cup from the
Motor Base.
PRODUCT SAFETY
• Do not crush ice or overfill the
Cup with ice. Your nutribullet
®
is not intended to be used as
an ice crusher. Overfilling the
Cup with ice may cause the
ice to wedge into the blade,
stopping and overheating
the motor.
• Always blend ice and
frozen ingredients with
sucient liquid.
• Always use some liquid
ingredients when blending.
• Cups, To-Go Lids, and
other nutribullet
®
parts
or accessories are NOT
microwave-safe.
• Do not use the Cup if you
detect cracking, cloudiness,
or other damage. You
may purchase new Cups
at bulletbrands.com.au /
6. If cool to the touch, slowly
disengage the Cup from the
Motor Base.
7. With the Cup pointed
away from your face and
body, use a towel and slowly
untwist the the Extractor
Blade from the Cup to gently
release any residual pressure.
If you are unable to untwist
the Cup from the Extractor
Blade, dispose of the Cup
and contents properly so you
or others will not be injured
if fermentation causes the
Cup and blade to separate.
NEVER leave the sealed
contents out for a prolonged
period of time. The contents
may ferment, causing the
Cup to separate with force,
which may result in bodily
injury or property damage.
• ALWAYS securely tighten the
Extractor Blade to the Cup to
prevent leakage.
• Always make sure the Cup
is securely locked on the
Motor Base before blending.
The motor will not turn on
unless the Cup is set in the
locked position.
• Do not remove the Cup while
the unit is in operation.
• NEVER operate your
nutribullet
®
Cup if empty.
98
NEVER open the Pitcher Lid
or Spout while blending.
To incorporate ingredients
during blending ONLY,
OPEN THE VENTED CAP
and carefully pour or
drop ingredients into the
mixture. When adding
ingredients to already hot
ingredients or liquids, be
mindful of escaping hot
steam or splattering of
hot ingredients.
• When using manual speeds,
start blending on the LOW
setting and once ingredients
are integrated, adjust speed
as needed.
Proper Blending Pitcher use
is important to the safe
operation of your nutribullet
®
.
Using the Blending Pitcher
inconsistent with these
instructions may result in
bodily injury, property damage,
or damage to your unit.
• Before blending, check
that the vent slots on the
Pitcher Lid are clear and
unobstructed. Clogged or
obstructed vent slots will
pressurize the contents that
may cause hot steam or
splatter on hot contents
when opened.
• Recipes that require certain
ingredients to be incorporated
during blending, first add
bulletbrands.co.nz or by
contacting Customer Service.
• Periodically inspect your
Extractor Blade. If the
blades do not rotate freely
or if the gasket is missing or
damaged, immediately
discontinue use and contact
Customer Service.
USING THE
BLENDING PITCHER
PERSONAL SAFETY
• ALWAYS ax the vented
Pitcher Lid to the Blending
Pitcher with the spout down
and closed before blending
to prevent ingredients from
splashing or hot ingredients
from splattering, which may
cause burns, bodily injuries or
property damage.
• Operate the Blender Pitcher
with the Pitcher Lid securely
locked in place and the
spout closed.
• After blending hot ingredients
or liquids, exercise caution
when opening the Pitcher Lid,
being mindful of escaping
hot steam or splattering of
hot ingredients.
• Do not overfill the Blending
Pitcher beyond the MAX line.
or damage to the blender.
The cover must remain in
place when using the tamper
through the cover opening.
A scraper may be used but
must be used only when the
blender is not running.
PRODUCT SAFETY
• NEVER USE spatulas,
spoons, or other tools that
may contact the spinning
blade. Doing so can damage
the unit, shatter the Blending
Pitcher, or cause severe bodily
injury or property damage.
FOOD PROCESSOR
SAFETY
PERSONAL SAFETY
Proper use of your Food
Processor function is important
for the safe operation of your
nutribullet
®
. Using the Food
Processor inconsistent with
these instructions may result in
bodily injury, property damage,
or damage to your unit. To
reduce the risk of severe injury
to persons or property damage:
Blades and discs are sharp.
Handle blades and discs
carefully by the center
plastic area.
• NEVER use excessive force
on the Dual-Size Food
the base ingredients,
attach the Pitcher Lid, and
begin blending. Once the
ingredients are well mixed,
twist open the vented lid cap
and carefully pour or drop
ingredients into the blended
mixture. If the blended
mixture is hot or warm,
use caution and open the
vented lid cap slowly, being
mindful of escaping hot steam
or the splattering of hot
ingredients. Always reinstall
the vented lid cap when
finished adding ingredients.
• Keep hands and utensils,
other than the tamper
provided, out of container
while blending to reduce
the risk of severe injury to
persons or damage to the
blender. The cover must
remain in place when using
the tamper through the cover
opening. A scraper may
be used but must be used
only when the blender is
not running.
• ONLY USE THE TAMPER
PROVIDED with your
nutribullet
®
to push
ingredients closer to the
blade. The Tamper is
specifically designed not
to come in contact with
the blade. Keep hands and
utensils, other than the tamper
provided, out of container
while blending to reduce the
risk of severe injury to persons
WARNING!
WARNING!
1110
• Do not fill the Work Bowl
above the marked maximum
fill line to avoid risk of injury
due to damage to the cover
or bowl.
PRODUCT SAFETY
• Do not overload the Feed
Chute with ingredients that
may overheat the motor or
damage the Work Bowl. Wait
until food naturally moves
down the Feed Chute and
into the Work Bowl before
adding more food.
GENERAL BLADE
AND DISC SAFETY
PERSONAL SAFETY
Blades and Discs are sharp!
Handle with care to avoid
bodily injury. Non-food items
or hard ingredients may
damage the various Blades
and Discs of your nutribullet
®
.
Routinely inspect the Blades
and Discs and discontinue
use if damaged. Continued
use with damaged Blades or
Discs or use inconsistent with
these instructions may result
in bodily injury, property
damage, or damage to
your unit.
Do not touch the sharp edges
of the Blades or Discs. To
avoid laceration injury, do not
Pusher to push food down
the Feed Chute. This may
overheat the motor or
damage the Work Bowl. For
best results, start your Food
Processor before placing
food into the Feed Chute.
• NEVER put hands, fingers or
utensils in the Feed Chute
or Work Bowl. Only use the
provided Dual-Size Food
Pusher to push food down the
Feed Chute.
• NEVER place hands or
utensils near moving Blades
or Discs while processing
food to reduce the risk of
severe injury to persons
or damage to the food
processor. A scraper may be
used but must be used only
when the food processor is
not running.
• NEVER store exposed Blade
attachments or Discs in
the Work Bowl. Exposed
Blades can present a
dangerous hazard, resulting
in injury. Always cover stored
attachments with the Work
Bowl Lid.
• A scraper or spatula may be
used BUT ONLY WHEN THE
APPLIANCE IS POWERED OFF.
• Be certain cover is securely
locked in place before
operating appliance.
handle or touch any sharp
parts of the Blade or Disc.
NEVER store exposed Blades
or Discs in the Work Bowl or
on the Motor Base. Exposed
Blades and Discs can present
the hazard of severe personal
injury. Always cover exposed
Blades and Discs with the
Work Bowl Lid or Cup. An
exposed Blade or Disc can
present a laceration hazard.
• Do not remove the Cup,
Blending Pitcher, or Work
Bowl until Blades have
come to a complete stop.
Removing before the Blades
come to a complete stop
can cause damage to the
attachments or unit.
• Always POWER OFF and
UNPLUG the unit and wait
until the Blades or Discs
come to a complete
stop before assembling,
disassembling, changing
accessories, or cleaning.
• To reduce the risk of injury,
never place cutting Blade
or Discs on the Motor Base
without first putting bowl
properly in place.
• AVOID CONTACT WITH
MOVING PARTS! Do not
attempt to defeat any safety
interlock mechanisms. Keep
hands and utensils out of
and away from the Blades
or Discs to reduce the risk
of severe personal injury or
damage to the unit.
PRODUCT SAFETY
• NEVER place the Blades or
Discs or any nutribullet
®
part
or accessory on the bottom
rack, or use the heat/sanitize
cycle of your dishwasher
when cleaning.
• Periodically inspect the
Blades and Discs for damage.
DO NOT use any Blade or
Disc if damaged and contact
Customer Service.
• Periodically inspect your
Extractor Blade and Pitcher
Blade. If the blades do not
rotate freely or are damaged,
immediately discontinue
use and contact Customer
Service. If the gasket to the
Extractor Blade is missing
or damaged, discontinue
use and contact Customer
Service. We recommend
replacing the Extractor Blade
every 6 months (depending
on use), or as needed for
optimal performance.
WARNING!
1312
GENERAL PRODUCT
SAFETY
Modification, improper use,
and failure to follow the
instructions for proper set
up, use, and care of your
nutribullet
®
Triple Prep System
can increase the risk of serious
personal injury, death, or
property damage.
• Do not use the unit in
countries or locations
with dierent electrical
specifications or plug types.
• Do not use the unit with a
voltage converter device, as
it may cause electrical
shorting, fire, electric shock
resulting in personal injury or
product damage.
• Do not use the unit in an area
that is wet, or anywhere it
could become wet.
• Do not place any nutribullet
®
part or accessory in a
microwave, conventional
oven, air fryer, or stovetop pot,
or immerse in boiling water,
as this will damage the part.
• Do not attempt to plug the
unit into an electrical outlet
with wet hands.
• Avoid contact with the
touchscreen display when
the power icon is illuminated
to prevent inadvertent and
unexpected operation of
the unit.
• Do not use the cord, plug,
or Motor Base if it has been
immersed in water or other
liquids. Any significant spillage
on, under, or around the
Motor Base should be cleaned
and dried before plugging in
and using the unit.
• Do not modify the electrical
cord in any way.
• Do not operate any unit with
a damaged electrical cord
or plug. The electrical cord
and plug are not suitable for
replacement. If damaged,
the appliance should be
replaced. Contact Customer
Service for assistance at:
AU: 1300 285 538 /
NZ: 0800 232 633.
• Do not allow or place the
electrical cord near or
touching any hot surfaces,
heat source, or flame,
including the stove.
• Do not allow the electrical
cord to hang over the edge of
a table or counter.
• Do not pull, twist, or damage
the power cord.
• Overloading the unit may
overheat the motor and
engage the thermal breaker.
If the internal thermal
breaker shuts o the motor,
unplug the Motor Base and
let it cool for an hour before
attempting to use it again.
The thermal breaker will reset
when the unit is unplugged
and the thermal breaker
cools down.
• Always UNPLUG your
nutribullet
®
when it is not in
use, and when assembling,
disassembling, changing
accessories, or cleaning.
• NEVER pull from the power
cord to unplug. To unplug,
grasp the plug and pull from
the outlet.
• Do not use the Blades
or Discs for grinding dry
ingredients such as grains,
cereal, or coee, as this may
damage the motor and/or
the Blades and Discs. Use of
dry ingredients may cause
the motor to overheat.
• Do not overload the Cup,
Blending Pitcher, Food
Chute, or Work Bowl, as this
may result in the Blades or
Discs ceasing to function. If
this occurs, turn o the unit,
empty some of the contents,
reattach, and resume.
• NEVER obstruct the
ventilation openings on the
bottom of the Motor Base of
your nutribullet
®
Triple Prep
System. Openings on the
bottom of the Motor Base
should be free of dust and
lint and never obstructed.
Obstructing the ventilation
openings may overheat
the motor, presenting a
fire hazard that may cause
serious personal injury,
death, or property damage.
• ALWAYS operate the
nutribullet
®
on a level surface,
leaving unobstructed space
beneath and around the
Motor Base to permit proper
air circulation. Slots on the
bottom of the Motor Base are
provided for ventilation to
ensure reliable operation
and to prevent the motor
from overheating.
• NEVER place your
nutribullet
®
on top of
flammable materials such
as newspapers, tablecloths,
napkins, dishtowels, place
mats, or other similar type
of materials.
!
Save these
instructions!
1514
Contents.
2 Important safeguards
16 What’s included
18 Assembly guide
18 Blender
19 Food processor
20 Control panel
24 Using your nutribullet
®
Triple Prep System
24 Blending
25 Using the nutribullet
®
single-serve cup
27 Using the nutribullet
®
blending pitcher
30 Using the nutribullet
®
food processor
31 Chopping blade
34 Dough blade
37 Reversible slice/shred disc
40 Care & maintenance
44 nutribullet
®
Triple Prep System
one-year limited warranty
Thank you for purchasing the nutribullet
®
Triple Prep System.
1716
Product confi gurations may vary. To see our full list of nutribullet
®
accessories,
please visit: bulletbrands.com.au / bulletbrands.co.nz
NB Triple Prep System pieces
NB Triple Prep System pieces
NB Triple Prep System pieces
NB Triple Prep System pieces
OFF LOW HIGH PULSE
NB Triple Prep System pieces
NB Triple Prep System pieces
What’s included.
motor base
blade adaptor
2 to-go lids
extractor blade
pitcher lid
with spout
tamper
900ml
single-serve cup
700ml
single-serve cup
1.8L blending
pitcher with blade
reversible
slice/shred disc
chopping blade
dual-size
food pusher
work bowl lid with
feed chute
7-cup processing
work bowl
dough blade
1918
OFF LOW HIGH PULSE
Assembly guide.
single-serve
cup
vented lid cap
pitcher lid
pitcher
easy-pour spout
tamper
integrated blade
control panel
control panel
motor base
extractor blade
Blender.
motor base
7-cup
processing
work bowl
dual-size
food pusher
chopping blade
work bowl lid
with feed chute
blade adaptor
dough blade
reversible
slice/shred disc
Food processor.
2120
Control panel.
OFF/ON
The Power button controls the
master power of the appliance.
If the Blending Pitcher with Lid,
nutribullet
®
Single-Serve
Cup, or Processing Work Bowl
is locked in place, pressing
POWER will indicate the unit is
powered on and illuminate the
Control Panel.
TIMER
When using a Speed:
Timer starts at zero (00:00)
and increases during operation,
showing time elapsed since
blending began.
When using program presets:
Timer countds down during
operation until program is
completed, except with the
Food Processing programs of
Chop and Dip, where timer will
count up.
MANUAL SPEEDS
Manual speeds can be
used for continuous blending
or processing using
any of the attachments.
Low speed: Continuous Low
speed blending or processing.
Medium speed: Continuous
Medium speed blending
or processing.
High speed: Continuous High
speed blending or processing
Pulse: Use to control blending,
chopping, and processing.
Press and release the Pulse
button to chop ingredients.
Holding down will cause the
Blade to run continuously.
Do not hold and run Pulse
continuously for more that
one minute.
2322
BLENDER PITCHER MODE
Preset programs for using
the Blending Pitcher:
Purée: Delivers a perfectly
smooth texture — ideal for
soups, sauces, and spreads.
Frozen Drinks: Perfect for
large-batch ice-blended
mocktails or cocktails and
frappe style drinks.
Smoothie: Blends fresh and
frozen fruits and vegetables
into creamy smoothies.
Nutmilk: Creates fresh
non-dairy milks, like almond
or cashew, with no straining
required. See Recipe Guide
for recipes.
SINGLE SERVE MODE
Preset programs for using
Single-Serve Cups:
Dressing: Use for
small-batch dressings
for salads.
Frozen Drinks: Perfect
for ice-blended mocktails
or cocktails and frappe
style drinks.
Smoothie: Blends fresh and
frozen fruits and vegetables
into creamy smoothies.
This is how the display
interface appears when the
unit base is powered on without
an attachment locked in place.
FOOD PROCESSING MODE
Preset programs
for food processing:
Chop: Use for chopping fresh
ingredients like onions.
Dough: Use for mixing small
batches of dough, like pizza or
tortilla dough.
Dip: Great for mixing salsas
and other chunky dips.
SLEEP MODE
All lighted programs and
speeds will be dim in Sleep
Mode, except for the Power
Button and the Timer display.
Once a program has completed
for any of the attachments
or a manual speed has been
stopped, the display interface
will go into Sleep Mode at
the end of any program or
blending speed, or after 60
seconds of inactivity. To wake
the display interface up, simply
tap any of the programs or
speeds on the interface. Once
awoken, you may proceed to
select any speed or program
for use. To power o , press the
Power Button while in Sleep
Mode to turn the unit o .
2524
Using the nutribullet
®
Single-Serve Cup.
Using your
Triple Prep System:
blending.
• Do not blend hot or
warm ingredients in the
nutribullet
®
Cups.
• Do not blend for more
than one minute.
• Do not blend
anything carbonated
or e ervescent.
1 Place the Motor Base on a
clean, dry, and level surface.
2 Place ingredients into the
nutribullet
®
Cup.
WARNING! Do not overfi ll!
To avoid leakage, do not
add ingredients beyond the
MAX line.
NEVER use the nutribullet
®
Cups to blend hot, warm,
or carbonated ingredients.
Friction from the rotating
blades can cause contents to
heat and pressurize, which
may result in eruption upon
opening. Eruption of the hot
contents and exposed blade
may cause serious bodily
injuries or property damage.
Use only the Blender
Pitcher and vented Pitcher Lid
to blend your hot, warm, or
carbonated ingredients.
WARNING!
3 Twist the Extractor
Blade onto the Cup so it
is tightly sealed.
WARNING! Extractor Blade
is sharp. Handle with care.
4 Plug the Motor Base’s
power cord into an
electrical outlet.
• Do not overfi ll or crush ice.
Always use su cient liquid
ingredients when blending.
• Do not leave blended foods
in the sealed Cup.
• Do not open a sealed
nutribullet
®
Cup if it feels hot
or warm to the touch.
• Do not attempt to separate
the Cup from the Extractor
Blade by force or by prying
apart components.
• Do not use the Cup
if you detect cracking,
cloudiness, or other damage.
• Do not use the Extractor
Blade if the blades do not
rotate freely or if the gasket is
missing or damaged.
nutribullet
®
Single-Serve Cup.
2726
7 Select one of the
programs for blending
in the nutribullet
®
Cup:
Frozen Drinks, Smoothie, or
Dressing. Each mode will
activate a preset blending
cycle. You can also select
Low, Medium, or High
speed for your blend.
8 Once blending has stopped or
you’ve achieved your desired
consistency, twist the Cup
counter-clockwise to unlock
and remove it from the Motor
Base. You will hear a “click”
when the Cup unlocks.
5 Flip the Cup downward and
set onto the Motor Base.
6 Twist the Cup clockwise
onto the Motor Base to
lock it into place. (A “click”
signals that the Cup is
locked.) This will illuminate
the Control Panel.
• ALWAYS a x the vented
Pitcher Lid to the Blending
Pitcher with the spout down
and closed before blending
to prevent ingredients from
splashing or hot ingredients
from splattering.
To prevent injuries while
blending hot, warm, or
carbonated ingredients, ONLY
use the Blending Pitcher
with the vented Pitcher Lid.
NEVER use the nutribullet
®
Cups to blend hot, warm, or
carbonated ingredients.
WARNING!
nutribullet
®
Blending Pitcher.
• CAUTION! When opening
the Pitcher Lid, be mindful
of escaping hot steam or the
splattering of hot ingredients.
• NEVER open the Pitcher Lid
or Easy-Pour Spout while
blending. Only use the Vented
Lid Cap opening to add
additional ingredients during
blending. Always reinstall the
Vented Lid Cap when fi nished
adding ingredients.
• Only use the Tamper (see
page 16 for Tamper reference)
to push ingredients closer
to the blade. Never use your
hand or other utensils.
Using the Blender Pitcher.
1 Place the Motor Base
on a clean, dry, and
level surface.
2 Add ingredients to the
Pitcher. Don’t exceed the
MAX line.
NOTE: Do not use the Extractor
Blade as a storage lid. Pressurization
of the contents may occur due to
the natural fermentation of the
ingredients. Use the To-Go Lid to store.
Smoothie
Dressing
Frozen Drinks
2928
3 Place the Lid on top of the
Pitcher and press down to
secure it in place. Place the
Lid Cap over the opening,
press down fi rmly, and twist
until it’s locked in place.
4 Place the Pitcher onto the
unplugged Motor Base.
Twist clockwise. The
Pitcher will click when
locked into place.
5 Plug in the Motor Base.
The Control Panel will
illuminate with the
blender menu. Select the
program based on your
ingredients to activate a
preset blending cycle, or
select the Low, Medium, or
High-speed cycle.
6 Once blending has stopped,
twist the Pitcher counter-
clockwise to unlock and
remove it from the Motor
Base. You will hear a “click”
when the Pitcher unlocks.
7 You can pour directly
from the Pitcher by
unlatching the Lid above
the pour spout.
8 You can also press up with
your thumb on the tab
above the handle to
remove the Lid.
WARNING! When
opening the Pitcher Lid,
be mindful of escaping hot
steam or the splattering of
hot ingredients.
3130
1 Place the Work Bowl on a
fl at, clean, and dry surface.
Place the Blade Adapter
atop the central shaft and
push the Adapter down to
secure into place.
2 Place the Chopping
Blade onto the Blade
Adapter shaft.
3 Prep ingredients and add
to the Work Bowl. Remove
seeds, stems, and other
non-edible pieces. Cut large
items into 1-2 inch pieces
before processing. Do not
exceed the MAX line.
Using your
Triple Prep System:
food processing.
Using the Chopping Blade:
chop, mix, and mince food.
30
• Blades and Discs are sharp.
Handle with care by the
center plastic area.
• Do not use excessive force
to push food down the
Feed Chute with the Food
Pusher. For best results, start
your Food Processor fi r s t
before adding food into
the Feed Chute.
Using the Food Processor
inconsistent with the
instructions contained in
this User Guide may result
in bodily injury, property
damage, or damage to your
unit. To reduce the risk of
severe injury to persons or
property damage, always
keep in mind:
WARNING!
• Do not overload the Feed
Chute. Allow food to
move down the Feed
Chute naturally.
• NEVER put hands, fi ngers, or
utensils inside the Feed Chute
or Work Bowl.
• NEVER store exposed Blade
Attachments or Discs in the
Work Bowl.
• A scraper or spatula may be
used, but only when the unit is
p o w e r e d o .
nutribullet
®
Food Processor.
WARNING! Blades and
Discs are sharp. Handle
with care.
4 Place the Work Bowl onto
the unplugged Motor Base.
Twist clockwise. The Work
Bowl will click when locked
into place.
3332
6 Plug in the Motor Base. The
Control Panel will illuminate
the food processor menu
showing preset modes.
Select Chop for toppings
or mixes or Dip for spreads
and dips.
7 Select and hold Pulse for
manual chopping.
8 You can also select
Low, Medium, or High
for alternative preset
processing speeds.
10 When fi nished processing,
wait until the Blade stops
before twisting the Work
Bowl Lid counter-clockwise
to unlock and remove it
from the Work Bowl.
NOTE: The Work Bowl Lid must be
unlocked from the Work Bowl in
order to remove the Work Bowl from
the Motor Base.
9 If you need to add liquid,
turn the Lid’s Pusher Cap
clockwise to unlock and
remove the Inner Pusher.
Pour liquid through the top
chute (do not fi ll beyond the
Work Bowl’s MAX line) and
re-insert the Inner Pusher.
11 Twist the Work Bowl
counter-clockwise to unlock
and remove it from the
Motor Base.
12 Carefully remove the
Chopping Blade by
only touching the plastic
areas. Use a spoon or
spatula to transfer
chopped ingredients from
the Work Bowl.
WARNING! Keep
fi ngers from the Blade’s
sharp edges!
5 Place the Work Bowl Lid
atop the Work Bowl. Twist
the Lid clockwise and line up
the arrows to lock into place.
Insert the Food Pusher into
the Lid’s Feed Chute.
NOTE: The Work Bowl Lid must be
secured to the Work Bowl after the
Work Bowl is secured to the Motor
Base for the unit to function.
3534
1 Place the Work Bowl on a
fl at, clean, and dry surface.
Place the Blade Adapter
atop the central shaft and
push the Adapter down to
secure into place.
2 Place the Dough Blade onto
the Blade Adapter shaft.
3 Prep ingredients as
necessary and add to
the Work Bowl.
4 Place the Work Bowl onto
the unplugged Motor Base.
Twist clockwise. The Work
Bowl will click when locked
into place.
Using the Dough Blade:
combine ingredients to make dough for
bread, pizza, or pie crusts.
5 Place the Work Bowl Lid
atop the Work Bowl.
Twist the Lid clockwise
and line up the arrows
to lock into place. Insert
the Food Pusher into the
Lid’s Feed Chute.
6 Plug in the Motor Base. The
user interface will illuminate
the food processor menu.
To integrate wet and dry
ingredients before kneading,
select and hold the Pulse
setting. Pulse the mixture a
few times, until ingredients
are more evenly distributed.
7 Once the dough begins to
take shape, switch the food
processor to the Dough or
Low setting. Do not select
a higher speed, as this can
overwork the dough.
8 Once dough is fully
kneaded, stop the
machine. Wait until the
Blade stops rotating before
twisting the Work Bowl Lid
counter-clockwise to unlock
and remove it from the
Work Bowl.
3736
9 Twist the Work Bowl
counter-clockwise to unlock
and remove it from the
Motor Base.
10 Carefully remove the
Dough Blade.
Using the Reversible Slice/Shred Disc:
slice or shred ingredients.
1 Place the Work Bowl on a
fl at, clean, and dry surface.
Place the Blade Adapter
atop the central shaft and
push the Adapter down to
secure into place.
2 Place the Slice/Shred
Disc onto the Blade
Adapter shaft.
NOTE: The Slice/Shred Disc is
reversible, with one side labeled
for shredding and the other
for slicing.
This Disc attachment can be
placed in 2 di erent positions
on the Blade Adaptor. The
lower position is for storage,
and the higher position is for
use. Hold the center knob of the
Disc, and carefully place it on
the Blade Adaptor. Align the
markings on the Disc with the
markings on the Blade Adaptor,
so that the lines connect. If the
Disc appears to be in the
lower position, remove the Disc
and rotate until the markings
line up and the Disc sits in the
higher position.
WARNING! Blades and
Discs are sharp. Handle
with care.
3 Place the Work Bowl onto
the unplugged Motor Base.
Twist clockwise. The Work
Bowl will click when locked
into place.
3938
5 Plug in the Motor Base.
The Control Panel will
illuminate the food
processor menu. Select the
High setting.
6 With the motor running,
twist the Food Pusher Lid
Cap clockwise to unlock and
remove the Inner Pusher to
access the small feed chute.
Or, leave the Inner Pusher
in place and remove the
entire Food Pusher to use
the larger chute. Use the
pusher to guide ingredients
into the bowl.
4 Place the Work Bowl Lid
atop the Work Bowl. Twist
the Lid clockwise and
line up the arrows to lock
into place. Insert the Food
Pusher into the Lid’s
Feed Chute.
7 When fi nished processing,
wait until the Blade stops
rotating before twisting
the Work Bowl Lid counter-
clockwise to unlock and
remove it from the
Work Bowl.
8 Twist the Work Bowl
counter-clockwise to unlock
and remove it from the
Motor Base.
9 Carefully remove the
Slice/Shred Disc. Use a
spoon or spatula to transfer
chopped ingredients.
WARNING! Blades and
Discs are sharp. Handle
with care.
WARNING! Never use
fi ngers or utensils to push
food down the Feed Chute.
Only use the Food Pusher.
WARNING! Do not force
food down the Feed Chute.
Use the Food Pusher to
gently guide food down the
Feed Chute or allow the
food to move down the
Chute naturally.
Care & maintenance.
PLEASE KEEP THESE
IMPORTANT SAFEGUARDS
IN MIND WHEN USING
YOUR NUTRIBULLET
®
:
• Always power o and unplug
your nutribullet
®
when not
in use or when assembling,
disassembling, changing
accessories, or cleaning.
• Always wait until the motor
comes to a complete stop
before handling or removing
any attachment.
• Do not place any nutribullet
®
part, accessory, or
attachment in the microwave,
they are not microwave-safe.
• Do not leave Blade or Discs
exposed when storing.
Blades and Discs are sharp,
always cover.
• NEVER wash your nutribullet
®
part or accessory using
the sanitize or heat cycle of
your dishwasher. Doing so
can warp the part, which can
create hazardous conditions
during use that may
result in bodily injury or
property damage.
• Do not attempt to clean the
Motor Base by immersing
in water or other cleaning
liquids. Gently wipe and dry
with a clean cloth.
• Do not place any parts or
accessories in a microwave,
conventional oven, air fryer,
or stovetop pot, or immerse
in boiling water to clean or
sanitize, as this will damage
the part.
• Make sure that the Motor
Base ventilation openings are
unobstructed and clean.
• Periodically inspect your
nutribullet
®
Triple Prep
System components for
damage or wear that may
impair proper function or
present a safety hazard.
Never operate your
nutribullet
®
with damaged
parts or components:
– Discontinue use if you
detect cracking, cloudiness,
warping, or damage to the
Cups, Blending Pitcher, or
Work Bowl.
– Discontinue use if the
Extractor Blade does not
rotate freely or if the gasket
is missing or damaged.
Continued use with a
damaged blade or use
inconsistent with these
instructions may result
in bodily injury, property
damage, or damage to your
unit.
• NEVER attempt to use
your nutribullet
®
if it
malfunctions or is damaged
or compromised in any
way. Immediately contact
customer service at:
AU: 1300 285 538 /
NZ: 0800 232 633.
• Do not use the Extractor
Blade if it does not rotate
freely. Depending on use,
it is recommend that the
Extractor Blade be replaced
at least every 6 months,
depending on use.
• NEVER use after-market
replacement parts for
your nutribullet
®
Triple
Prep System. Aftermarket
parts are not made to
nutribullet
®
specifications
and may damage your unit
or cause serious injury. Use
only genuine nutribullet
attachments/accessories
specifically designed for
your nutribullet
®
Triple
Prep System. For questions
concerning replacement
parts, contact Customer
Service at: AU: 1300 285
538 / NZ: 0800 232 633 or
visit: bulletbrands.com.au /
bulletbrands.co.nz.
4140
4342
1 Make sure your Motor
Base is powered o
and unplugged from
its outlet.
2 Detach the Cup, Pitcher,
or Work Bowl from the
Motor Base.
3 Clean the individual
components as follows:
EXTRACTOR BLADES:
• Use a small brush or sponge
dampened in soapy water to
remove any residue from the
Extractor Blade.
NOTE: It’s best to clean the Extractor
Blade immediately after use to avoid
the buildup of residue.
MOTOR BASE:
• Use a warm sponge or
dishcloth dampened with
soapy water to clean the
surface of the Motor Base.
• Use a small brush to scrub
the actuator system of the
Motor Base.
OTHER ACCESSORIES:
The following components
are dishwasher-safe:
• Blade Adapter
• Blade Attachments
• Cups
• Food Pusher
• To-Go Lids
Rinse or scrub beforehand to
remove any debris.
BLENDING PITCHER:
• The Pitcher and Pitcher
Lid are dishwasher-safe. if
preferred, hand wash using
soap and water. The blades
are sharp. Take care not to
touch while washing by hand
TAMPER:
• Always wash the Tamper by
hand with soap and water.
WORK BOWL:
• The Work Bowl and Work Bowl
Lid are dishwasher-safe. If
preferred, hand wash using
soap and water. Be sure to
remove any Blade Attachments
or Discs as well as the Blade
Adapter before washing.
WARNING! NEVER wash your
nutribullet
®
part or accessory
using the sanitize or heat
cycle of your dishwasher.
Doing so can warp the part,
which can create hazardous
conditions during use that
may result in bodily injury or
property damage.
STUCK INGREDIENTS:
• To remove stubborn residue
from the Cups or Extractor
Blades, fi ll your Cup with
room-temperature water
to the MAX line and add 1-2
drops of dish soap.
• Twist on the Extractor
Blade and blend for 20-30
seconds to loosen debris
enough to scrub away with
soap and water.
• To remove stubborn residue
from the Blending Pitcher, fi ll
halfway with water and add
1-2 drops of dish soap. Blend
for 20-30 seconds to loosen
debris enough to scrub away
with soap and water.
STORAGE:
• Always store your nutribullet
®
upright with nothing on top of
it. Store accessories in a safe
place until use.
• You can store the food
processor components
within the Work Bowl. Place
the Blade Adaptor on the
center shaft, followed by
the Chopping Blade, Dough
Blade, and lastly, the Slice/
Shred Disc. Attach the Lid
once all components are
in place.
• NEVER store or leave Blades
or Discs exposed. Always
cover with appropriate lid
or cover.
For replacement
parts.
Periodically inspect your
nutribullet
®
for damage or
wear. Never operate if any of
the parts and accessories are
damaged in any manner which
may impair proper function or
create a safety hazard. Contact
Customer Service for assistance
by visiting: bulletbrands.com.au
/ bulletbrands.co.nz or calling:
AU: 1300 285 538 /
NZ: 0800 232 633.
Use only genuine nutribullet
®
attachments/accessories
specifi cally designed for your
nutribullet
®
Triple Prep System.
Aftermarket parts are not
made to nutribullet
®
specifi cations and may
damage your unit or cause
serious injury.
4544
If your product becomes
defective due to faulty
material or workmanship
within a period of One
(1) Year from the date of
purchase, we warrant
to do the following:
• For New Zealand Consumers:
We will replace the defective
product with a new product,
free of charge, or repair the
product at our cost, at our
discretion.
• For Australian Consumers:
Our goods come with
guarantees that cannot
be excluded under the
Australian Consumer
Law. You are entitled to
a replacement or refund
for a major failure and for
compensation for any other
reasonably foreseeable
loss or damage. You are
also entitled to have the
goods repaired or replaced
if the goods fail to be of
acceptable quality and the
failure does not amount to
a major failure.
one (1) year limited
replacement warranty
statement.
YOUR WARRANTY
IS SUBJECT TO THE
FOLLOWING CONDITIONS:
• DO NOT operate the
appliance with a damaged
plug or cord, or if the unit has
been dropped, damaged or
dropped in water. To avoid
the risk of electric shock, do
not disassemble or attempt
to repair the appliance
on your own. If the supply
cord is damaged, it must
be replaced by a qualified
electrician in order to
avoid a hazard. Incorrect
re-assembly or repair can
cause a risk of electric shock
or injury to persons when the
appliance is used.
• The item has not been
misused, abused, neglected,
altered, modified or repaired
by anyone.
• The item has been subjected
to fair wear and tear.
• The item has not been used
for trade, professional or
hire purposes.
• The item has not sustained
damage through foreign
objects, substances or accident.
YOUR WARRANTY
DOES NOT COVER:
• Components that are
subject to natural wear
and tear caused by
normal use in accordance
with operating instructions.
• Unauthorised/improper
maintenance/handling or
overload is excluded from
this warranty.
• For guarantee claims, you
will need to submit a proof
of purchase in the form of
a valid receipt that displays
date and place of purchase.
This warranty does not replace
but is in addition to your
statutory rights.
This warranty does not apply
to accessories supplied with
the item.
This warranty applies only to
the original purchaser and
may not be transferred.
Replacement items will
be covered by the limited
warranty for the balance of the
warranty period from the date
of the original purchase.
PLEASE NOTE:
Only the defective product
or parts returned to place of
purchase will be replaced
under this warranty.
NEW ZEALAND
PO Box 100-707
NSMC
Auckland 0745
0800 232633
bulletbrands.co.nz
AUSTRALIA
PO Box 574
South Morang
Victoria 3752
1300 285538
bulletbrands.com.au
nutribullet is a registered trademark of CapBran Holdings, LLC.
Copyright © 2022 CapBran Holdings, LLC. All rights reserved.
Los Angeles, CA 90025, USA. Made in China.
4746
MODEL: (NBP-200) NBKS07100
RATING: AC 220-240V 50-60Hz 1500W
Capital Brands Distribution, LLC | All rights reserved.
nutribullet
®
Triple Prep System is the trademark of CapBran Holdings, LLC
registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving to improve
our products, therefore the specifications contained herein are subject to change
without notice.
230731_NBKS07100
