Better Homes & Gardens BH46-084-899-07 Mission Media 60in Antique White Fireplace

Product's Documents

Below are documents related to this product, you can read online or download:
User Manual Dimension Guide
BH46-084-899-07 photo

User Manual

This is the main product document for model BH46-084-899-07.

The file format is pdf, 56 pages, you can download this manual here .

background
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2016-06-23 Rev. 0001-C Factory: KONRIC
Media Fireplace Console
Stock # BH15-084-899-12
# BH46-084-899-07
# BH46-084-899-08
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to parts@whalenfurniture.com
LOT NUMBER:
DATE PURCHASE
D
:
/
/
background
2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Media Fireplace Console
MODEL #: BH15-084-899-12 / BH46-084-899-07 / BH46-084-899-08
MADE IN CHINA
How to adjust the European adjustable hinges on doors
Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted
slightly, turn the appropriate screw, as illustrated.
1. TO ADJUST DOOR FORWARD OR BACKWARD.
2. TO ADJUST DOOR TO RIGHT OR TO LEFT.
3. TO ADJUST DOOR UP OR DOWN.
MAXIMUM RECOMMENDED WE IGHT LOADS
MAXIMUM LOAD 50 lb. (22.6 kg)
FITS UP TO MOST 65” FLAT PANEL TVs
MAXIMUM LOAD 135 lb. (61.2 kg)
PLACE TV BEHIND THE STOPPER
THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT
PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS.
NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR EQUIPMENT. TO
AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTRE OF THE UNIT; THE BASE OF THE
TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING SURFACE OF THE UNIT WITHOUT
OVER-HANGING THE EDGES. IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS
OR OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL
OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.
1
3
2
background
3
IMPORTANT
Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-
abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.
NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED
OFF WITH DAMP CLOTH.
Insert Dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.
CAM LOCK SYSTEM OPERATION
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw Cam Bolt into the pre-drilled small holes on panel. Connect both panels together; making
sure Cam Bolt goes into pre-drilled hole on the end of panel with Cam Lock.
2. Insert Cam Lock into pre-drilled large hole on panel. Make sure arrow on Cam Lock is pointed toward
Cam Bolt.
3. Once Cam Bolt is connected inside Cam Lock, take a Phillips screwdriver and tighten Cam Lock
clockwise.
4. Plug Cam Cap into the cross slot of the Cam Locks to conceal the cam.
You are now ready to assemble the KD unit.
X
X
FINAL
1 2 43
background
4
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Top Panel (1) B- Upper Side Panel (2) C- Upper Partition Panel (1)
D- Fixed Shelf (1)
E- Left Lower Side Panel (1) F- Right Lower Side Panel (1)
G- Left Lower Partition Panel (1) H- Right Lower Partition Panel (1)
I- Middle Crossbar Assembly (1)
J- Bottom Panel (1) K- Base Front Molding (1) L- Base Rear Stretcher (1)
M- Right Door (1) N- Left Door (1) O- Upper Back Panel (1)
P- Lower Back Panel (2) Q- Firebox Support (1) R- Adjustable Shelf (2)
background
5
Parts and Hardware List
S- Stop Rail (1) Fireplace Insert (1) Remote Control with Battery (1)
(1) Cam Lock
(2) Cam Bolt
(3) Ø8 x 30 mm Wood Dowel
(35+1 extra) (35+1 extra) (34+1 extra)
(4) Ø3.5 x 12 mm Screw (5) Ø4 x 19 mm Screw (6) Ø4 x 40 mm Wood Screw
(12+1 extra) (2+1 extra) (4+1 extra)
(7) Ø3.5 x 15 mm
Washer Head
Screw
(30+1 extra) (8) 2”
Lag Bolt
(2) (9) Straight Metal Bracket (2)
(10) Handle and Back Plate (2) (11) 15 mm Handle Bolt (2) (12) Angle Metal Bracket (2)
(13) Floor Leveler (14) Rubber Bumper (15) Shelf Pin (16) Cam Lock Cover
(2) (4+1 extra) (8+1 extra) (26+1 extra)
Glue (1) Touch-up Pen (1) Tipping Restraint Hardware Kit (2)
(Not included for item #BH46-084-899-07) (Included in plastic bag)
Tools required: Phillips screwdriver and hammer (not provided).
background
6
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), Lower Side
Panels (E and F) and Bottom Panel (J), by a Phillips screwdriver, as shown in the illustration.
A/J/E/F
A
J
E
F
Cam Bolt
(18 used in this step)
②
background
7
Assembly Instructions
3. Securely screw the Cam Bolts (2) into the designated small holes on the Fixed Shelf (D) as shown.
2
D
Cam Bolt
(11 used in this step)
②
background
8
Assembly Instructions
4. Insert two Wood Dowels (3) into the inner holes of Middle Crossbar Assembly (I). Tap it in with a
rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.
5. Align the drilled holes on the Fixed Shelf (D) with the inserted Wood Dowel (3) on the Middle
Crossbar Assembly (I), and then press them together. Attach the Middle Crossbar Assembly (I) in place
by engaging three Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
1
1
1
3
3
D
I
Wood Dowel
(2 used in this step)
③
Cam Lock
(3 used in this step)
①
background
9
Assembly Instructions
6. Align and attach the Bottom Rear Stretcher (L) to the Bottom Panel (J) by using two wood dowels (3)
and three cam locks (1). As shown.
7. Repeat the same procedure to attach the Base Front Molding (K) to the Bottom Panel (J).
J
L
K
1
3
1
1
3
3
3
Wood Dowel
(4 used in this step)
③
Cam Lock
(6 used in this step)
①
background
10
Assembly Instructions
8. Insert six Wood Dowels (3) into the large holes of the assembled base at both ends.
9. Align the large holes on Left Lower Side Panel (E) with the inserted Wood Dowels (3) on the
assembled base. Firmly press them together and fasten it in place by engaging three Cam Locks (1).
10. Repeat last step to attach Right Lower Side Panel (F) at the other end.
J
L
K
E
F
1
1
1
3
3
3
3
Wood Dowel
(6 used in this step)
③
Cam Lock
(6 used in this step)
①
background
11
Assembly Instructions
11. Insert four Wood Dowels (3) into the inner holes of the Lower Partition Panels (G and H) and attach
them to the Bottom Panel (J) by using four 40 mm Wood Screws (6). As shown.
Wood Dowel
(4 used in this step)
③
Ø4 x 40 mm Wood Screw
(4 used in this step)
⑥
6
E
G
H
F
J
K
L
6
3
3
background
12
Assembly Instructions
12. Insert eight Wood Dowels (3) into the inner holes on the top edge of the Lower Side Panels and
Partition Panels (E, F, G and H).
13. Ask for assistance to position the Fixed Shelf (D) onto the inserted Wood Dowels (3) with the middle
crossbar assembly facing forward. Attach the Fixed Shelf (D) in place by engaging eight Cam Locks
(1).
E
G
H
F
D
I
3
3
3
3
1
1
1
1
J
K
L
Wood Dowel
(8 used in this step)
③
Cam Lock
(8 used in this step)
①
background
13
Assembly Instructions
14.
With the pilot holes as a guide, align and attach two Angle Metal Brackets (12) to the front corners of
the assembled base, using four 12 mm Screws (4) per bracket. As shown above.
Angle Metal
Bracket
(2 used in this step)
⑫
Ø3.5 x 12 mm Screw
(8 used in this step)
④
4
4
12
K
E/F
E
G
H
F
J
K
L
background
14
Assembly Instructions
15.
Screw two Floor Levelers (13) into the threaded sockets on the Angle Metal Brackets (12).
Floor Leveler
(2 used in this step)
⑬
E
G
H
F
J
K
L
13
13
background
15
Assembly Instructions
16.
Stand the assembled unit upright.
17.
Securely screw six Cam Bolts (2) into the designated small holes on the Fixed Shelf (D) by a Phillips
screwdriver.
2
D
Cam Bolt
(6 used in this step)
②
background
16
Assembly Instructions
18.
Insert five Wood Dowels (3) into the large holes on the Fixed Shelf (D). Attach the Upper Side Panels
(B) and Partition Panel (C) to the Fixed Shelf (D) by using six Cam Locks (1).
3
1
3
1
3
3
1
1
E
G
H
F
D
B
C
B
Wood Dowel
(5 used in this step)
③
Cam Lock
(6 used in this step)
①
background
17
Assembly Instructions
19.
Insert five Wood Dowels (3) into the top inner holes of the Upper Partition Panel (C) and Side Panels
(B). Position the Top Panel (A) onto the inserted Wood Dowels (3) and fasten it in place with six Cam
Locks (1).
Cam Lock
(6 used in this step)
①
Wood Dowel
(5 used in this step)
③
E
G
H
F
C
B
B
1
3
1
3
3
1
A
background
18
Assembly Instructions
20.
Fasten the Middle Crossbar Assembly (I) to the stringers of Lower Partition Panels (G and H) by
attaching two Straight Metal Brackets (9) at the joints, using two 12 mm Screws (4) per Bracket.
21.
Insert two 19 mm Screws (5) through the countersunk holes on the stringers on Lower Partition Panels
(G and H) and securely screw into the Middle Crossbar Assembly (I) as shown.
Straight Metal
Bracket
(2 used in this step)
⑨
Ø3.5 x 12 mm Screw
(4 used in this step)
④
G/H
I
4
9
5
H
G
I
Ø4 x 19 mm Screw
(2 used in this step)
⑤
background
19
Assembly Instructions
22.
Pick up the Upper Back Panel (O) and align the pre-drilled holes against the upper long edge with the
pilot holes on the back stretcher of Top Panel (A). Attach the Back Panel (O) in place using the
provided Washer Head Screws (7).
23.
Align and attach two Lower Back Panels (P) to the mantel base with the provided Washer Head Screws
(7).
B/C
E/F
G/H
A
7
O/P
A
B
F
P
J
O
P
G
B
C
D
M3.5 x 15 mm
Washer Head
Screw
(30 used in this step)
⑦
background
20
Assembly Instructions
24.
Insert four Shelf Pins (15) into the holes at your desired height inside each side compartment. Tilt and
rest the Adjustable Shelves (R) onto the Shelf Pins (15).
25.
Plug the Cam Lock Covers (16) onto the visible cams locks to conceal the cams.
A
B
C
B
E
G
H
F
J
R
R
15
15
E/F/G/H
R
16
E/F/G/H
Shelf Pin
(8 used in this step)
⑮
Cam Lock Cover
(26 used in this step)
⑯
background
21
Assembly Instructions
26.
Pick up the Left Door (N) and attach the extended Hinge Arms to the Hinge Bases installed on the Left
Lower Side Panel (E). Loosen the bolt on the back of Hinge Base for an easy fit. Align and insert the
“U” slot on Hinge Arm under the bolt head on the back of Hinge Base. Make sure that both door hinges
engage and function properly. Tighten the bolt on the Hinge Base to lock the hinges in place.
27.
Repeat the same procedure to attach the Right Door (M) to the Right Lower Side Panel (F).
28.
Stick the Rubber Bumpers (14) on the outer corners of Left and Right Doors (M and N) as shown.
29.
Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the
screws for a good fit. Refer to the hinge sticker on door for adjustment.
E
F
N
M
14
M/N
14
M/N
E/F
1
M/N
E/F
Rubber Bumper
(4 used in this step)
⑭
background
22
Assembly Instructions
30.
Attach one Handle and Back Plate (10) to the front side of each Door (M and N) with the provided
Handle Bolt (11).
Handle and Back Plate
(2 used in this step)
⑩
Handle Bolt
(2 used in this step)
⑪
10
11
10
background
23
Assembly Instructions
31.
Lift the Fireplace Insert carefully into the back of the assembled mantel and center it in the opening. DO
NOT drag the insert across the Bottom Panel (J) as it may scratch the unit.
J
background
24
Assembly Instructions
32.
Align and attach the Firebox Support (Q) to the Bottom Panel (J) by screwing two 2” Lag Bolts (8)
through the countersunk holes and screw into place.
Q
8
8
J
2”
Lag Bolt
(2 used in this step)
⑧
background
25
Assembly Instructions
NOTE: You must install the Strip Stopper to prevent the TV from tipping when placing your flat panel
television directly on the console.
33.
Remove the paper backing from the Stop Rail (S), then properly align the Stop Rail with the top edge of the
stopper template on Top Panel (A). Press down on the Stop Rail to help adhesion.
34.
Carefully remove the stopper template from the Top Panel (A).
A
S
S
A
S
background
26
Assembly Instructions
Tools required: Phillips screwdriver, Power Drill, 3/8” Drill Bit and Rubber Mallet.
35.
Ask for assistance to position the assemble fireplace at the desired location against a wall. If necessary,
adjust the pre-attached Floor Levelers at the bottom of the Base to level the unit. Now, follow the
instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over
restraints to the unit and the wall.
NOTE: Young children can be seriously injured by tipping furniture. You must install the Tipping
Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents or damage. The
tipping restraint is intended only as a deterrent, they are not a substitute for proper adult supervision.
The tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
36.
Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace
insert to control your fireplace.
A
background
27
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further Advice about Wood Furniture Care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
Cleaning Trim for Fireplace
Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean
soft cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus
oil based products can be obtained at supermarkets or hardware stores.
A touch-up pen has been provided to minimize the small nicks or scratches that may occur during assembly or
shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace
it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your
highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
Customer Service: 866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenstyle.com
background
background
ESTE MANUAL DE INSTRUCCIONES CONTIENE INFORMACIÓN IMPORTANTE DE SEGURIDAD.
POR FAVOR LEA Y CONSERVAR PARA FUTURAS REFERENCIAS.
Fecha 2017-06-23 Rev. 0001-C Fábrica: KONRIC
Chimenea Consola para Medios de Comunicación
Serie # BH15-084-899-12
# BH46-084-899-07
# BH46-084-899-08
ENSAMBLE REQUERIDO POR ADULTO
Si tiene alguna pregunta acerca del ensamble o si le hace falta alguna parte, no devuelva este producto a la
tienda
donde lo compró. Por
favor llame a nuestro departamento de ayuda al cliente teniendo su
instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica:
866-942-5362
Hora estándar del Pacífico: 8:30 a.m. - 4:30 p.m., Lunes-Viernes
Visite nuestra página de internet 24 horas al dia, 7 días a la semana para asistencia en el producto
www.whalenstyle.com
O mande un correo electrónico a
parts@whalenfurniture.com
LOTE NÚMERO:
FECHA COMPRA
:
/
/
background
2
FABRICANTE: Whalen Furniture Manufacturing
CATALOGO: Chimenea Consola para Medios de Comunicación
MODELO #: BH15-084-899-12 / BH46-084-899-07 / BH46-084-899-08
HECHO EN CHINA
Cómo ajustar las bisagras ajustables en las puertas
El envío puede causar que las puertas se desalineen. Si usted encuentra que las puertas deben ajustarse
ligeramente, girar el tornillo adecuado, como se ilustra.
1. PARA AJUSTAR HACIA EL FRENTE O HACIA
ATRAS.
2. PARA AJUSTAR HACIA LA DERECHA O
IZQUIERDA.
3. PARA AJUSTAR PARA ARRIBA O ABAJO.
PESOS MÁXIMOS RECOMENDADOS
CARGA
MÁXIMA
50 lb. (22.6 kg)
PARA LA MAYORÍA DE TV’s DE
65"
PANTALLA PLANA
CARGA
MÁXIMA
135 lb. (61.2 kg)
PONER LA TV DETRÁS DEL TOPE
1
3
2
ESTA UNIDAD NO DEBE UTILIZARSE CON TV’S CRT O DE TUBO.
UTILIZARSE UNICAMENTE CON TELEVISIONES DE PANTALLA PLANA Y EQUIPO DE
AUDIO/VIDEO QUE TENGA LA MEDIDA/PESO RECOMENDADOS. NUNCA UTILIZAR CON TV’S
MAS GRANDES/PESADAS DE LAS RECOMENDADAS PARA EVITAR INESTABILIDAD. PARA
EVITAR INESTABILIDAD COLOQUE EN EL CENTRO DE LA UNIDAD; LA BASE DE LA
TELEVISIÓN DEBE DE REPOSAR SOBRE LA SUPERFICIE DE SOPORTE DE LA UNIDAD SIN
REBASAR LAS ORILLAS. TV’S PANTALLA PLANA IMPROPIAMENTE COLOCADAS, TV’S
PANTALLA PLANA O EQUIPO QUE SOBREPASA LAS MEDIDAS Y PESOS RECOMENDADOS
PUEDE CAERSE Y/O ROMPER LA UNIDAD, CAUSANDO POSIBLES DAÑOS O LESIONES.
background
3
IMPORTANTE
Antes de comenzar: Abra, identifique y cuente todas las partes antes del ensamble. Coloque las piezas sobre
una superficie plana y no abrasiva. Tendrá que las partes identificadas en la página 4 y 5 de este manual de
instrucciones.
NOTA: ES MUY IMPORTANTE PARA EL USO DE GOMA CON LOS PERNSO DE MADERA. EL.
EXCESO DE PEGAMENTO SE PUEDE LIMPIAR CON UN PAÑO HÚMEDO.
Inserte el perno por lo menos a la mitad del camino golpeando ligeramente con un mazo de goma SI ES
NECESARIO.
SISTEMA DE OPERACIÓN DE TUERCA DE FIJACIÓN
CÓMO FUNCIONA LA INSTALACIÓN DE MONTAJE (KD)
1. Fijar los tornillos de fijación en los orificios pequeños. Conectar ambos paneles, cerciorandose que los
tornillos de fijación entren bien y que estos queden en los orificios al final del panel con tuercas de
fijación.
2.
Inserte las tuercas de fijación en los orificios grandes del panel. Hacer que la flecha en la tuerca este apuntando
hacia la entrada del tornillo de fijación
.
3. Una vez que el tornillo este conectado dentro, tome un destornillador de cruz y apriete la tuerca en
dirección de las manecillas del reloj.
4. Coloque la tapa de la tuerca de fijación sobre la misma en la ranura de cruz, ver detalle.
Está listo para el ensamble KD de esta unidad.
X
X
FINAL
1 2 43
background
4
Partes y lista de material de ferretería.
Por favor, lea completamente las instrucciones y verifique que todas las partes y material de ferretería
enumerados están presentes antes de comenzar el ensamble.
A- Panel superior (1) B- Panel lateral superior (2) C- Panel divisor superior (1)
D- Repisa fija (1) E- Panel lateral inferior izq.(1) F- Panel lateral inferior der. (1)
G- Panel divisor inferior izq. (1) H- Panel divisor inferior der. (1) I- Soporte medio
(1)
J- Panel inferior (1) K- Moldura frontal de base (1) L- Soporte posterior base (1)
M- Puerta derecha (1) N- Puerta izquierda (1) O- Panel posterior superior (1)
P- Panel posterior inferior (2) Q- Soporte de chimenea (1) R- Repisa ajustable (2)
background
5
Partes y material de ferretería
S- Riel tope (1) Inserto de chimenea (1) Control remoto c/bateria (1)
(1) Tuerca de fijación (2) Tornillo de fijación (3) Perno de Ø8 x 30 mm Madera
(35+1 extra) (35+1 extra) (34+1 extra)
(4) Tornillo de Ø3.5 x 12 mm (5) Tornillo de Ø4 x 19 mm (6) Tornillo de Ø4 x 40 mm
(12+1 extra) (2+1 extra) (4+1 extra)
(7) Ø3.5 x 15 mm
cabeza especial
(30+1 extra) (8) Tornillo de 2”
(2) (9) Soporte de metal (2)
(10) Jaladera completa (2) (11) Tornillo de 15 mm jaladera (2) (12) Soporte de metal angular (2)
(13) Nivelador de piso (14) Goma de plástico (15) Soporte de repisa (16) Tapa de tuerca
(2) (4+1 extra) (8+1 extra) (26+1 extra)
Goma (1) Plumón de retoque (1) Juego de restricción de movimiento (2)
(no se incluye para el artículo # BH46-084-899-07)
(Incluido en bolsa de plástico)
Herramienta requerida: Destornillador estrella y mazo de goma (no proveido).
background
6
Instrucciones de ensamble
1. Desempaque la unidad y confirmar que usted tiene todo el material de ferretería y piezas necesarias.
Ensamble la unidad en un lugar o de la caja de cartón vacía para evitar cualquier rasguño.
2. Fijar los tornillos de fijación (2) en los pequeños orificios designados en el panel superior (A), paneles
laterales inferiores (E y F) y base (J), con el desarmador estrella, como se muestra.
A/J/E/F
A
J
E
F
Tornillo de fijación
(18 usados en este paso)
②
background
7
Instrucciones de ensamble
3. Poner los tornillos de fijación (2) en los agujeros pequeños de la repisa fija (D) como se muestra.
2
D
Tornillo de fijación
(11 usados en este paso)
②
background
8
Instrucciones de ensamble
4. Inserte dos pernos de madera (3) en los orificios interiores del soporte medio (I). Golpee con un mazo
de goma, si es necesario. Asegúrese de que utiliza una pequeña cantidad de pegamento con los dos
extremos de los pernos.
5. Alinee los agujeros perforados en la repisa fija (D) con los pernos de madera (3) del soporte medio (I), y
luego presione juntos. Coloque el ensamble medio (I) en su lugar mediante la participación de tres
tuercas de fijación (1) (Consulte la página 3 de suplemento de la operación del sistema fijación).
1
1
1
3
3
D
I
Perno de madera
(2 usados en este paso)
③
Tuerca de fijación
(3 usados en este paso)
①
background
9
Instrucciones de ensamble
6. Alinear y adjuntar el soporte posterior inferior (L) al panel inferior (J) con 2 pernos de madera (3) y tres
tuercas de fijación (1). Como se muestra.
7. Repetir el mismo proceso para adjuntar la moldura frontal de la base (K) al panel inferior (J).
J
L
K
1
3
1
1
3
3
3
Perno de madera
(4 usados en este paso)
③
Tuerca de fijación
(6 usados en este paso)
①
background
10
Instrucciones de ensamble
8. Insertar seis pernos de madera (3) en los agujeros grandes de la base en ambos extremos.
9. Alinear los agujeros del panel lateral inferior izquierdo (E) con los pernos de madera (3) en la base
ensamblada. Firmemente presionar y fijar en su lugar con las tuercas de fijación (1).
10. Repetir el paso anterior para adjuntar el panel lateral inferior derecho (F) al otro extremo.
J
L
K
E
F
1
1
1
3
3
3
3
Perno de madera
(6 usados en este paso)
③
Tuerca de fijación
(6 usados en este paso)
①
background
11
Instrucciones de ensamble
11. Insertar cuatro pernos de madera (3) en los agujeros internos de los paneles divisor inferiores (G y H) y
fijarlos al panel inferior (J) con cuatro tornillos para madera de 40 mm (6), como se muestra.
Perno de madera
(4 usados en este paso)
③
Tornillo de Ø4 x 40 mm
(4 usados en este paso)
⑥
6
E
G
H
F
J
K
L
6
3
3
background
12
Instrucciones de ensamble
12. Insertar ocho pernos de madera (3) en los agujeros internos en el extremo superior de los paneles
laterales inferiores y paneles divisor (E, F, G y H).
13. Pida ayuda para poner la repisa fija (D) en los pernos de madera (3) con el soporte medio apuntando
hacia la parte frontal de la unidad. Fijar la repisa fija (D) en su lugar con ocho tuercas de fijación (1).
E
G
H
F
D
I
3
3
3
3
1
1
1
1
J
K
L
Perno de madera
(8 usados en este paso)
③
Tuerca de fijación
(8 usados en este paso)
①
background
13
Instrucciones de ensamble
14.
Con los agujeros piloto como una guía, alinear y conectar dos soportes angulares de metal (12) a las
esquinas frontales de la base de montaje, utilizando cuatro tornillos de 12 mm (4) por soporte. Como se
muestra anteriormente.
Soporte metal angular
(2 usados en este paso)
⑫
Tornillo de
Ø
3
.5
x
12
mm
(8 usados en este paso)
④
4
4
12
K
E/F
E
G
H
F
J
K
L
background
14
Instrucciones de ensamble
15.
Fijar dos niveladores de piso (13) en los insertos de los soportes de metal angulares (12).
Nivelador de piso
(2 usados en este paso)
⑬
E
G
H
F
J
K
L
13
13
background
15
Instrucciones de ensamble
16.
Poner la unidad en posición vertical.
17.
Colocar seis tornillos de fijación (2) en los agujeros pequeños designados en la repisa fija (D) con un
destornillador estrella.
2
D
Tornillo de fijación
(6 usados en este paso)
②
background
16
Instrucciones de ensamble
18.
Inserte cinco pernos de madera (3) en los agujeros grandes en la repisa fija (D). Fije los paneles
superiores laterales (B) y panel divisor (C) a la repisa fija (D) mediante el uso de seis tuercas de fijación
(1).
3
1
3
1
3
3
1
1
E
G
H
F
D
B
C
B
Perno de madera
(5 usados en este paso)
③
Tuerca de fijación
(6 usados en este paso)
①
background
17
E
G
H
F
C
B
B
1
3
1
3
3
1
A
Instrucciones de ensamble
19.
Inserte cinco pernos de madera (3) en los orificios superiores interiores del panel superior divisor (C) y
los paneles laterales (B). Coloque el panel superior (A) en los pernos de madera insertados (3) y fijarlo
en su lugar con seis tuercas de fijación (1).
Tuerca de fijación
(6 usados en este paso)
①
Perno de madera
(5 usados en este paso)
③
background
18
G/H
I
4
9
5
H
G
I
Instrucciones de ensamble
20.
Fijar el ensamble del soporte medio (I) a los largueros de los paneles divisor inferiores (G y H) uniendo
dos soportes metálicos rectos (9) en las articulaciones, utilizando dos tornillos 12 mm (4) por soporte.
21.
Inserte dos tornillos de 19 mm (5) a través de los agujeros avellanados en los largueros de los paneles
inferiores divisores (G y H) y de forma segura fije en el soporte medio (I) como se muestra.
Soporte de metal recto
(2 usados en este paso)
⑨
Tornillo de
Ø
3
.5
x
12
mm
(4 usados en este paso)
④
Tornillo de Ø4 x 19 mm
(2 usados en este paso)
⑤
background
19
Instrucciones de ensamble
22.
Levante el panel posterior superior (O) y alinee los agujeros previamente perforados contra el borde
largo superior con los agujeros piloto sobre el soporte posterior del panel superior (A). Fije el panel
posterior (O) en su lugar con los tornillos proporcionados de cabeza especial (7).
23.
Alinear y conectar dos paneles posteriores inferiores (P) a la base de la chimenea con los tornillos de
cabeza especial (7).
B/C
E/F
G/H
A
7
O/P
A
B
F
P
J
O
P
G
B
C
D
M3.5 x 15 mm
cabeza especial
(30 usados en este paso)
⑦
background
20
Instrucciones de ensamble
24.
Inserte cuatro soportes de repisa (15) en los agujeros en la altura deseada dentro de cada
compartimiento lateral. Incline y descanse las repisas ajustables (R) sobre los soportes (15).
25.
Conecte las tapas de tuerca (16) sobre las que esten visibles para ocultarlas.
A
B
C
B
E
G
H
F
J
R
R
15
15
E/F/G/H
R
16
E/F/G/H
Soporte repisa
(8 usados en este paso)
⑮
Tapa de tuerca
(26 usados en este paso)
⑯
background
21
Instrucciones de ensamble
26.
Levante la puerta izquierda (N) y adjuntar la bisagra a las bases de la bisagra de los muebles en el panel
lateral inferior (E). Aflojar el tornillo en la parte posterior de la bisagra de la base para un ajuste fácil.
Alinee e inserte la ranura "U" en la bisagra del brazo bajo la cabeza del tornillo en la parte posterior de
la bisagra de la base. Asegúrese de que las bisagras funcionan correctamente. Apriete el perno de la
bisagra de la base para fijar las bisagras en su lugar.
27.
Repetir el mismo proceso para adjuntar la puerta derecha (M) al panel lateral derecho inferior (F).
28.
Poner las gomas de plástico (14) en los extremos de las puertas izq. y der. (M y N) como se muestra.
29.
Abrir y cerrar las puertas para asegurarse de que estén alineadas y cierran correctamente. Si es necesario, ajuste
los tornillos para un buen ajuste. Consulte la etiqueta de la bisagra de la puerta para el ajuste
.
E
F
N
M
14
M/N
14
M/N
E/F
1
M/N
E/F
Goma plástica
(4 usados en este paso)
⑭
background
22
Instrucciones de ensamble
30.
Instalar una jaladera entre la placa trasera (10) y adjuntarlas a la parte frontal de puertas (M y N)) con
los tornillos de jaladera (11).
Jaladera completa
(2 usados en este paso)
⑩
Tornillo p/jaladera
(2 usados en este paso)
⑪
10
11
10
background
23
Instrucciones de ensamble
31.
Levante el inserto de chimenea e insertar con cuidado en la parte posterior de la repisa ensamblada y
centrarla en la apertura. NO arrastre el inserto a través de l base (J), ya que puede rayar la unidad.
J
background
24
Instrucciones de ensamble
32.
Alinear y unir el soporte de chimenea (Q) al panel inferior (J) fijar dos tornillos de 2” (8) a través de los
orificios avellanados y fije en su lugar.
Q
8
8
J
Tornillo de 2”
(2 usados en este paso)
⑧
background
25
Instrucciones de ensamble
NOTA: Es necesario instalar el tapón para evitar que el televisor se caiga al poner su televisor de
pantalla plana directamente en el panel superior.
33.
Retire el papel protector del riel tope (S), y luego alinear correctamente el riel tope con el borde superior de
la plantilla en el panel superior (A). Presione hacia abajo en el riel tope de ayudar a la adhesión.
34.
Retire con cuidado la plantilla del tapón del panel superior (A).
A
S
S
A
S
background
26
Instrucciones de ensamble
Herramienta requerida: Destornillador estrella, taladro, broca de 3/8” y mazo de goma
.
35.
Pide ayuda para colocar la unidad ensamblada en el lugar deseado contra una pared
.
Si es necesario, ajuste los
niveladores de piso pre-fijado en la parte inferior de la unidad para nivelar la unidad. Ahora, siga las
instrucciones impresas en la bolsa de plástico que contiene el herraje para evitar el vuelco para fijar las
restricciones en la unidad y la pared
.
NOTA: Los niños pequeños pueden sufrir lesiones graves inclinando muebles. Debe instalar el herraje
de restricción con la unidad en función para evitar que la unidad se vuelque, provocando accidentes o
daños. Las restricciones se ofrecen solamente como un elemento de disuasión, no son un sustituto de la
supervisión de un adulto. Las restricciones no son restricciones del terremoto. Si desea agregar la
mayor seguridad de las restricciones del terremoto, que deben comprarse e instalarse por separado.
36.
Conecte la chimenea a una fuente de potencia. Siga las instrucciones de manejo separado de chimenea
eléctrica para controlar.
A
background
27
Mantenimiento y Cuidados
Use una toalla suave y limpia para evitar daños y rayaduras.
Uso de cera para pulir muebles no es necesario. Si desea usar cera cheque en una area que no sea visible
para checar su funcionamiento.
Usar solventes de cualquier tipo puede dañar el terminado del mueble.
Nunca use agua para limpiar la unidad, ya que le puede dañar el terminado.
Siempre utilize protección para vasos cuando ponga sobre la unidad.
Liquidos derramados deben limpiarse inmediatamente, con una toalla suave evitando tallar.
Siempre utilizar protectores en caso de poner cosas calientes. El calor puede provocar una reacción
química en el terminado y dañarlo.
Manchas o marcas de crayones serán difíciles de remover.
En caso que su unidad sea manchada durante el uso le recomendamos hablar a un profesional para que le
ayude.
Checar tornillos periodicamente y apretar en caso necesario.
Más recomendaciones para el cuidado de su Mueble
Es lo mejor mantener la unidad en una area de clima controlado. Temperatura extrema y cambios de humedad
pueden causar cambios como partes pandas, molduras que se contraigan o que la madera se raje. Es
recommendable mantener la unidad lejos del sol directo ya que puede dañar el terminado.
Cuidados adecuados y limpieza pueden extender la vida útil de su unidad. Siga estás recomendaciones y
mantendra su mueble en buenas condiciones de uso por muchos años.
Limpieza del marco de chimenea
Limpie la moldura de metal con un paño suave ligeramente humedecido con producto a base de aceite de
cítricos y pula con un paño suave y limpio. NO use esmalte de latón o de limpieza para el hogar, ya que estos
productos puede dañar el revestimiento de metal. Productos a base de aceite de cítricos se pueden obtener en
los supermercados o ferreterías.
Un plumón de retoque es proveído en caso de pequeñas raspaduras o golpes que sucedan durante el ensamble o
envío.
Esperamos que disfrute su mueble por muchos años.
¡Gracias por su compra!
GARANTÍA DE CALIDAD
Estamos seguros de que usted estará encantado con su compra Whalen Furniture.
Si este producto presenta defectos de fabricación ni de materiales o no en condiciones de uso normal, se
reparará o reemplazará durante un máximo de un (1) año desde la fecha de compra. Cada producto Whalen
Furniture está diseñado para satisfacer sus más altas expectativas. Le garantizamos que usted verá
inmediatamente el valor de nuestros muebles finos.
Esta garantía le otorga derechos legales específicos y usted también puede tener otros derechos que varían de
un Estado a otro.
Servicio al cliente: 866-942-5362
8:30 a.m. - 4:30 p.m., PST, de lunes a viernes
www.whalenstyle.com
background

Specifications

Better Homes & Gardens BH46-084-899-07 Questions and Answers

Questions and Answers

Related Products