The remote control requires 2 AAA 1.5V batteries (not included) and
the vehicle requires 4 AA 1.5V batteries (not included).
Vehicle
1. Make sure the power switch on the bottom of the vehicle is in the
o position.
2. Use a Phillips-head screwdriver to remove the screw from the
battery cover and then remove the battery cover.
3. Insert 4 AA 1.5V batteries (not included) into the battery
compartment according to the battery diagram.
4. Replace the battery cover and securely tighten the screw.
Remote control
1. Use a tool to press and hold the battery cover release on the
back of the remote control and then slide down the battery cover.
2. Insert 2 AAA 1.5V batteries (not included) into the battery
compartment according to the battery diagram.
3. Slide the battery cover back into place securely.
VORTEX
6+
1 Vortex
1 Remote Control
Contents
Getting Started
Battery Cover Release
Right Stick
Light Button
Power LED
Left Stick
Demo Button
Power Button
Battery Cover
Battery Cover
LED Lights
Power Switch (O/I)
Power and Pairing
1. Make sure both the remote control and vehicle are powered o.
2. Press the power button on the remote control to power on the remote control. The power light on the remote control will glow white, fading on and o, to
indicate the remote control is in pairing mode and ready to pair with the vehicle.
3. Flip the switch on the bottom of the vehicle to the on position to power on the vehicle. The pairing light on the vehicle will glow, fading on and o, to indicate
the vehicle is in pairing mode. It will automatically begin pairing with the remote control.
4. Wait for the pairing light on the remote control to quit fading on and o. It will stay solidly lit when pairing is successful.
5. If pairing is unsuccessful within 60 seconds, power o both the remote control and vehicle and then repeat steps 2 through 4.
6. Start driving!
7. If pairing is interrupted or out of range, the remote control and vehicle will both enter pairing mode and attempt to reconnect. Move the remote control and
vehicle closer together. If pairing is unsuccessful within 60 seconds, power o both the remote control and vehicle and then repeat steps 2 through 4.
8. When finished driving, press the power button on the remote control to power o the remote control and flip the switch on the bottom of the vehicle to the o
position to power o the vehicle.
Note: To save battery life, the remote control and vehicle automatically enter sleep mode after 5 minutes of inactivity. To wake from sleep mode, power o and
then power on the remote control and vehicle.
IMPORTANT: If the vehicle stops suddenly while the headlights flash rapidly, power o the vehicle and wait at least 30 minutes for the battery to cool before
continuing to drive.
Multiple Drivers
The remote control connects to the vehicle using 2.4GHz digital channel selection that allows up to 16 drivers to race side by side in the same wireless range
without interference. Pair each vehicle and remote separately.
VORTEX
6+
Forward
Reverse
Left Spin
Right Spin
Demo Show
Light Eect
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Sharper Image® name and logos (including the 77 logo) are
trademarks or registered trademarks. Distributed by and © 2024
MerchSource, LLC. Irvine, CA 92618. All rights reserved.
Model No.: 1019040
• Adult supervision is recommended when operating the vehicle.
• Always drive responsibly and make sure driving paths are clear.
Never drive towards or in close proximity to people or animals.
Never drive on streets or roadways to avoid trac hazards.
• Keep fingers, hair, and loose clothing away from tires and all
moving parts while the vehicle is in motion.
• Avoid exposing the vehicle and remote control to water. Avoid
driving through water. Never drive outdoors in rain or snow. Never
leave the vehicle or remote control outdoors overnight.
• Do not expose the vehicle or remote control to extreme
temperatures.
• Do not leave the vehicle or remote control near sources of heat or
under direct sunlight for extended periods.
• Do not sit, step, stand, or place objects on the vehicle. It is not
designed to support extra weight.
• Do not disassemble or modify the vehicle or remote control.
• Thoroughly inspect the vehicle and remote control before every
use. If the vehicle or remote control appears worn, frayed,
splintered, cracked, or broken in any manner, discontinue use and
discard immediately.
ALKALINE BATTERY WARNINGS
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
batteries.
• Alkaline batteries are recommended. Use only the specified
voltage.
• Insert batteries using the correct polarity. Always use, replace,
and recharge (if applicable) batteries under adult supervision.
• Do not attempt to charge non-rechargeable batteries.
• Do not short-circuit the battery supply terminals.
• Do not dispose of batteries in fire: batteries may explode or
leak.
• Remove batteries before storing.
• Recycle or dispose of batteries according to federal, state, and
local laws.
• Keep these instructions for future reference.
WARNING:
CHOKING HAZARD –
Small Parts.
Not for children under 3 years of age.
KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT
INFORMATION FOR FUTURE REFERENCE.
Due to continuous product improvements, the pictures on this
manual may dier slightly from the actual product.
1-800-374-2744
Printed in China
