2
Warning & Safety
PLEASE READ AND FOLLOW INSTRUCTIONS BELOW TO PREVENT
INJURY OR DAMAGE TO THE PRODUCT
BakeMax® (a registered trademark of Titan Ventures International Inc or TVI) is
not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone
over the age of 18, of sound mind, and not under the influence of any drugs or
alcohol, who has been trained in the correct operation of this machine, and is
wearing authorized, proper safety clothing. This machine is intended for
commercial use only. Any modification or miss use to the machine voids any
warranty and may cause harm to individuals using the machine or around the
machine while in operation.
• When using the machine, please ensure that you have read all the
instructions within this manual.
• Be aware of your surroundings when using this machine, ensure there
are no children or any other persons who are near the machine before
operating.
• Do not put hand near moving parts.
• Remove all obstacles, which may interfere with machine functions.
• Keep work area clean and clear of clutter.
• Do not sit or stand on machine.
• Do not wear loose clothing or jewelry when operating machine as it may
get caught in moving parts and cause injury.
• Stop using the machine and have it checked by an authorized service
personal if it is not working properly.
• Disconnect from power source before performing and maintenance or
cleaning on the machine.
• When the machine is not in use, please clean and store properly,
• Do not place any electrical parts or plug / cord in water or liquid.
• If the supply cord is damaged it must be replaced by an authorized
service agent to avoid any electrical hazards.
• Keep power cord away from heat.
• Always ensure to follow local laws when operating your machine.
3
GENERAL INFORMATION
Before installing the appliance, read operation and maintenance instructions carefully.
Wrong installation and part changing may damage the product or may cause injury to
people. These are not in our company’s responsibility to damage the appliance
intentionally, negligence, detriments because of disobeying instructions and
regulations, wrong connections, unauthorized intervention to appliance invalidates the
warranty.
1. This instruction manual should be kept in a safe place for future reference.
2. Installation should be made in accordance with the ordinances and security rules of that
country by qualified service personnel.
3. This appliance must be used by a trained person.
4. Please turn off the appliance immediately in the event of malfunction or failure. The
appliance should be repaired only by authorized service personnel. Please demand
original spare part.
WARNING:
• This device must be installed in accordance with applicable legislation and should only be
used in a well-ventilated area. Please refer to the instructions before installing and using
this device.
• Improper installation, adjustment, modification, service or maintenance can result in
property damage, injury or death. Read the installation, use and maintenance instructions
before installing or servicing this equipment.
SAFETY SYMBOLS
These symbols are intended to alert the user to the presence of important
operating and maintenance instructions in the manual accompanying the
appliance.
4
SERVICE AND MAINTENANCE
Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below
and have it ready when you call to ensure a faster service.
Model No.
BMPLFPLSDK
Serial No.
Voltage
Purchase Date
Authorized Service Agent Listing Reference the listing provided with the unit or for an updated
listing go to:
Website: www.BakeMax.com
E-mail: [email protected]
Service Help Desk
Company
BakeMax
Website
www.BakeMax.com
Phone
(800) 565-2253
Fax
(506) 859-6929
Address
20 Caribou St, Moncton, NB E1H 0P3
IMPORTANT
Make sure that all paper protection and packaging have been removed before
operating the device.
WARNING :The device must be used by trained personnel.
5
PRODUCT DESCRIPTION
* This oven, w
h
ic
h
p
r
o
vi
de
s
h
i
gh
e
ffici
en
cy, is
a
pro
f
e
ssi
ona
l pizza oven
p
r
odu
c
ed
fo
r
us
e in in
du
stri
a
l kitc
hen
s.
Model #
Gas
Power
Width
Depth
Height
Product
Weight
Crated
Weight
BMPLFPLSDK
LP or NG
25,591 BTU
33.86”
40.62”
34.65”
260lbs.
309lbs.
Non-
Combustible
Combustible
GROUND
N/A
12”
SIDES
N/A
12”
BACK
N/A
3”
6
TRANSPORT
• T
h
is device ca
nno
t
be
handh
el
d
. T
here
f
ore
,
u
s
e
a
f
or
klift t
ru
ck (f
o
rk
li
ft
o
r
palle
t tr
u
ck)
t
o
tr
an
s
po
rt t
he
devic
e
. (The lift
a
rms
o
f t
he
f
o
rklift
or
pa
ll
e
t t
ru
ck s
hou
l
d
rea
c
h
m
o
r
e
t
han
hal
f
wa
y fr
o
m t
he
bo
tt
o
m
o
f the
de
vice).
UNPACKING
• T
h
e
d
evice s
hou
l
d
be
opene
d,
and
its
pa
ck
ag
i
ng
s
hou
l
d
be
de
str
o
y
ed
a
cc
o
r
ding
t
o
t
he
r
egula
t
ion
s
o
f the country of
u
s
e
. F
ood
c
on
tact
par
ts
are
st
a
i
n
l
e
ss st
ee
l. All
pla
st
i
c
pa
rts
a
r
e
m
a
rk
ed
wi
t
h
t
he
sym
bol
of t
he
materia
l
.
• C
h
eck that the
pa
rts
o
f t
he
d
evic
e
are
c
omp
l
e
t
e
and
no
t
dam
a
ged
du
r
ing
tr
an
s
po
rt
a
t
ion
.
ASSEMBLY
• Plac
e
the pro
du
ct
on
a
fl
a
t
an
d s
o
li
d
s
ur
f
a
c
e
, t
a
k
e
t
he
ne
c
e
ss
a
ry
p
r
e
c
au
t
ion
s
again
st t
he
r
i
sks
o
f ti
p
pi
n
g.
• T
h
e
p
ersonnel w
ho
provide i
n
st
a
ll
a
ti
on
and
s
er
vic
e
t
o
t
he
d
e
v
i
c
e
m
u
st
be
e
x
pe
rts
in
t
hei
r f
ield
s and
h
ave an inst
a
ll
a
ti
on
-s
e
rvic
e
lic
en
se.
• C
o
nnection to t
he
e
l
e
ctric
a
l
po
w
er
s
upp
ly
mu
st
be
made
b
y
a
quali
f
ied
pe
rs
on
.
• T
h
e
d
evice m
u
st
be
c
onne
ct
ed
i
n
a
cc
ordan
c
e
wit
h
t
he
na
ti
on
a
l
and
lo
c
al
ga
s
st
anda
r
d
s
o
f t
he
r
el
e
vant count
r
y.
• *The area where the appliance is must have enough ventilation and vent-hole.
•
De
v
i
c
e
ga
s inl
e
ts
a
r
e
i
nd
ic
a
t
e
d
on
t
he
bod
y wit
h
t
he
“
G
”
l
abe
l.
• C
o
nnection to
ga
s i
n
st
a
ll
a
ti
o
n s
hou
l
d
be
done
wit
h
me
t
a
l fl
e
x
pipe
o
f s
ui
t
able
dia
m
e
t
e
r
and
ball
valv
e
. The said
ba
ll v
a
lv
e
s
ho
ul
d
be
fix
ed
i
n
a
p
l
a
c
e
a
w
a
y f
rom
hea
t
and
ea
s
il
y
a
cc
e
ss
ible
in
c
a
s
e
o
f danger. After t
he
ga
s i
n
l
e
t c
onne
cti
on
is
made
,
po
ssi
b
l
e
ga
s l
ea
ks s
hould
be
c
he
ck
ed
.
• *Connection to gas fitment must be done with suitable diameter metal flex pipe and
spheric valve. The spheric valve must be immobilized to a place that is far away
from heat and accessible during danger. After the gas entrance connection is done,
gas leakages must be checked.
• *According to the data on appliance information plate, gas and pressure must be
adjusted. If the gas type that is adjusted is not suitable with gas type that is at
installation place, apply the instructions that is about adjustment of different gas
type. (Event :G) *If the location where Pitta and Pizza Ovens are placed is covered
with nonflammable heat insulation material, the distance between them must be 5
cm. Otherwise it should be at least 20 cm. The appliance should be operated under
the chimney hood.
7
GENERAL WARNINGS
8
The installation of the Appliance must conform to the NATIONAL FUEL GAS CODE
"ANSI Z223.1 - LATEST EDITION" AND ALL LOCAL GAS COMPANY RULES AND
REGULATIONS. IN CANADA INSTALLATION SHALL BE IN ACCORDANCE WITH THE
CURRENT CAN/CGA-B149.1 NATURAL
GAS INSTALLATION CODE
National Fuel Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and, CSA B149.1,
as applicable, including:
1) The appliance and its individual shutoff valve must be disconnected from the gas
supply piping system during any pressure testing of that system at test pressures
more than 1/2 psi (3.5 kPa).
2) The appliance must be isolated from the gas supply piping system by closing its
individual manual shutoff valve during any pressure testing of the gas supply piping
system at test pressures equal to or less than 1/2 psi (3.5 kPa).
If you smell
ga
s,
c
all t
he
gas emergency services i
mmedia
t
el
y. U
n
t
i
l t
h
e Servic
e
T
ea
m
a
rriv
e
s
do
n
ot use
e
l
e
ctric
a
l
app
li
a
nc
e
s
or
switc
he
s, do
n
ot light ci
ga
r
e
tt
e
s
o
r matc
he
s, leave door
s
and
wi
ndo
ws as t
he
y
are,
go
o
utside
SAFETY SYMBOLS
T
he
s
e
sym
bo
ls
are
i
n
t
ended
t
o
a
l
er
t t
he
u
s
e
r t
o
t
he
p
r
e
s
en
c
e
o
f
i
m
po
rt
an
t
ope
r
a
ti
ng
and
ma
i
n
t
enan
c
e
i
n
st
ru
cti
on
s i
n
t
he
m
anual
a
cc
o
m
pan
y
ing
t
he
app
li
an
c
e
.
9
OPERATION INSTRUCTIONS
• Turn on the gas valve at the back of the unit
• Hold the Ignitor button “B” until the pilot is fired & keep pressing
the button to heat the thermostats edge.
• After the thermocouple has warmed up, the pilot will stay lit on
its own.
10
• Raise your hand from the Ignitor button, continue operation if
the flame continues to burn. If the flame goes out, the
thermocouple is not warmed up enough.
• Adjust the oven temperature to the desired temperature with
the knob, the knob on the left is for your upper burner & the
knob on the right is for your lower burner.
• Preheat before placing the product in the device. For this, bring
the device to 300-752ºF for 5-10 minutes and run it.
• Place the products in the oven and close the appliance door.
• After you are done with the oven, turn the knobs to the right &
turn off the gas valve at the back of the unit.
Note: If you are operating this appliance for the first time, keep
pressing the button at pilot position to evacuate the air from gas
fitment.
11
GAS CONVERSION INSTRUCTIONS
Change of Oven Injectors:
1. Change the ‘C’ injector by paying attention to the data on the chart.
2. If the flame is OFF involuntarily, the ‘B’ thermocouple will not see
the flame that is ON, and ‘A’ safety valve will stop the gas circulation.
Setting Half Flame:
1. Take off the knob. Turn the half flame screw ‘A’ that is at the left of
gas tap with screwdriver. To switch from LPG to NG turn to the left, to
switch from NG to LPG turn it to the right.
12
PART IDENTIFICATION
13
14
BMPLFPLSD Parts List
15
Warranty & Service Information
BakeMax provides a 1-Year Limited Parts and Labor warranty on most items, there are select
items which carry a Limited 2-Year Warranty. Extended Warranty is available on some
products. Please contact us for details. The Warranty is not transferable and is limited to
original installation of equipment sold by BakeMax for the original user.
For all Warranty Claims, Proof of Purchase and/or Serial Number is required. Once the
machine is approved, BakeMax will provide our customers with on-site Warranty Coverage on
all equipment more than 100lbs. BakeMax assumes no responsibility for down time or loss of
product. Repairs must be Pre-Authorized by BakeMax and have a Service Authorization
Number issued prior to commencing Warranty Service.
Warranty begins 10-Days after shipping from warehouse; delays in installation which would
extend the Warranty must be Approved. All equipment must be installed and connected by
Qualified Professionals in accordance with the Manual Specification. Products shipped are to
be inspected at time of delivery, the receiver is responsible for inspection.
Any abuse or improper use of the equipment will void the warranty. This includes failure to
follow all cleaning instructions, improper installation, improper maintenance, failure to follow
capacity charts, improperly wired electrical connections. The Warranty does not apply to
abuse, willful or accidental damage, or to products used for other than their intended purpose.
Normal wear parts such as Accessories, Attachments, or Electrical Components such as
Fuses, Bulbs, Elements, and Switches carry a 90-Day Warranty only.
Bench Warranty (Machines Weighing 100 lb. or less)
Once the machine is Approved for Warranty Service, if the machine requires Warranty work in
less than 30 days of purchase date, BakeMax will pay all shipping charges. Once the machine
is received and repaired it will be returned to the user at BakeMax expense. Freight Damages
during return shipping is the responsibility of the owner of the machine.
The following is not covered under the BakeMax Warranty:
1. Overtime Labor Rates are not covered by BakeMax.
2. All parts will be shipped via Ground Courier only; If Express Shipping is required, it will be
the responsibility of the Customer or Dealer.
3. Travel for Warranty Service is covered up to 100 Miles /160 Km Roundtrip, any further
milage will be the responsibility of the Customer or Dealer.
4. There is no on-site Warranty Service for Residential Addresses or addresses outside of the
contiguous United States (Lower 48) or Canada.
**BakeMax machines sold outside of the contiguous United States (Lower 48), or Canada will carry 1-Year
Parts Warranty only.
