www.silverstonetek.com
User manual
Accessories Content
RM31-MINI
Install Hard Drive
1-1 Remove the drive tray. 1-2 Install 2 × 3.5" drives or 2 × 2.5" drives. 1-3 Install the drive tray into the chassis.
Power Supply InstallationPower Supply and Radiator
limitations
2-1 Power Supply Installation
Left and Right Handles Installation
3-1 Secure the handle assemblies to both sides of
the chassis.
x2
Motherboard
standoff
Motherboard
screws
Secure 2.5″
SSD screws
Secure 2.5″
SSD tray
screws
Secure 3.5″
HDD, power
supply screws
Handle bar Handle bar
bracket
screws
L-shaped
bracket
3U rackmount server chassis with
8 expansion slots & 360mm radiator support
55mm
166mm
Supports installation of PSU up to 166mm
Supports installation of front fans and radiator
up to 55mm
Install radiator
4-1 Remove Front Panel 4-2 Install 120 mm fan + radiator 4-3 Install Front Panel
Graphics Card Width Limitation
Expansion Card Width Limit: 115 mm
CPU Cooler Limitation
CPU Cooler Height Limit: 110 mm If no side tray is installed, the CPU cooler may extend up to 6 mm beyond the edge of the motherboard.
If a side tray with a 2.5" drive is installed, the CPU cooler must remain within 7 mm inside the edge of
the motherboard.
361mm
Radiator and Expansion Card
Limitations
397mm
Combined radiator
and expansion card
length: 361 mm
If the radiator length
exceeds 397 mm, the
fans must be
installed in the front
with the radiator
positioned behind.
115mm
Maximum
110mm
6mm
2.5"SSD
OR
2.5"bracket
7mm
Motherboard Component
Limitations
Install Hard Drive
5-1 Remove the 2.5" Tray 5-2 Install the 2.5" Drive 5-3 Mount the Drive to the Chassis The drive mounting surface is 8 mm outside the
motherboard, and the drive has 33 mm of
clearance above the motherboard.
Please determine whether the drive will interfere
with motherboard components based on these
two conditions and the drive thickness.
33mm
8mm
Motherboard
2.5
" Drive
Warranty terms & conditions
Warranty Information
This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
本产品自购买之日起，于中国地区（不包含澳门，香港特别行政区）享有一年有限责任保固（部分产品为二年，三年或五年）。
详细保固年限请参照官方网站 https://silverstonetek.com.cn/ 公布之产品型号为依据。
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone
Technology’s jurisdiction.t
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other
inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for
the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technolog
y
is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under
no circumstances will SilverStone Technology be liable for damages in connection with the sale,
purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use
of the product or incidental or consequential damage whether or not foreseeable and whether or not
based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised
of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers
and is not transferable to a second hand purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warrant
y
eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone
authorized distributors or SilverStone http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized
receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized
distributors will bear the cost of shipping (or otherwise transporting) the product back to you after
completing the warranty service; (iii) Before you send the product, you must be issued a Return
Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be
posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.
Additional info & contacts
For North America (usasupport@silverstonetek.com)
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been
functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
back to the place of purchase if it is
within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading
the “USA RMA form for end-users”
form from the below link and follow its instructions. http://silverstonetek.com/contactus.php
For Australia only (support@silverstonetek.com)
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacemen
t or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238 (standard
international call charges apply)
For Europe (support.eu@silverstonetek.de)
For China (support@silverstonetek.com.cn)
For all other regions (support@silverstonetek.com)
有毒有害物质/元素及其化学含量表
部件名称
风扇
机壳
（金属）
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
○ ○ ○ ○ ○
铅
(Pb)
○
○ ○ ○ ○ ○○
线材
○ ○ ○ ○ ○○
螺丝
○ ○ ○ ○ ○
○
包材
○ ○ ○ ○ ○
○
○：表示该有毒有害物质在该部件所有均质材料中的含量均在GB/T 26572 规定的限量
要求以下。
本表格依据SJ/T 11364的规定编制
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的
限量要求。
G11256060
