Andeman EPOWER-166 Jump Starter 4000A Portable Power Bank User Manual

ENGLISH ENGLISHENGLISH ENGLISH

ENGLISH

TROUBLE SHOOTING

Performance index Performance index Specifications

1.Q: How do I turn off Epower-166 ?

L × W × H (mm)

Internal Battery

type-C Input

Output USB-1

Output USB-2

Working Temperature

Charging Temperature

Storage Temperature

14°F to 140°F

32°F to 113°F

-4°F to 122°F

180*80*36

Lithium Ion

5V/3A

5V/2A

Dimensions

Main Parameters

TOXIC AND HARMFUL SUBSTANCES

Problem Solution

SAFETY INSTRUCTIONS

WARNING

FCC statement：

Lead (Pb) Mercury (Hg) Cadmium (Cd)

Hexavalent

Chromium

(Cr (Vi))

Polybrominated

Biphenyls (PBB)

Polybrominated

Diphenyl Ethers

(PBDE)

No response when pressing

the power button

The voltage of the Epower-166 is really low and triggers the low power

protection to shut down the device. Plug the wall charger into the

Epower-166 to recharge it.

• Make sure the power switch is in the on position.

• Check that jump-starter is full charged. Recharge unit if necessary.

• Make sure a proper polarity cable connection has been established.

• Make sure the USB Charging Port Power Button is in the on position.

• Check that Jump-Starter has a full charge. Recharge unit if necessary

1. Read the user manual carefully before using this device.

5.The product only works with 12V battery.

6.Use the clamps that come with the device. When the clamp or wire is damaged, stop using it immediately

to avoid personal injuries caused by fire or electric shock.

7.Do not connect the positive and negative clamps to each other.

8.Before starting, make sure there is no rust or foreign matter on the interface. Connect the device with the

clamp tightly to make sure the device starts properly.

9.Remove the clamps from the car battery within 30 seconds after successfully starting the car. Otherwise,

it may cause damage.

10.Do not start the device more than three times in a row, and the interval between each start should be at

least two minutes otherwise the product will be overheated and damaged.

11.Do not use the clamps to power other devices.

12. Do not place the device in an environment where the temperature exceeds 140°F

13. The device shall be charged at a temperature of 32'F to 113°F

14. Do not put the device in water or expose it to rain.

15. Do not expose the device to high temperature or fire.

16. Do not use the device in explosive environment with flammable liquid, gas or dust

17. Make sure that someone around is available to help you when using the device

18. Do not wear metal jewelry such as rings, bracelets, and necklaces while using the device

19. Disconnect the jump starter and the clamp at the battery clamp plug to reduce the risk of damage to the

power plug and power cord.

20. Do not use damaged or modified battery packs to avoid the danger of fire, explosion, and injury

21.Use the original charger or a charger with the same input terminal as the jumper starter to charge

22.Do not charge this device immediately after starting the car.

23.Do not start the car while charging the device.

24.The battery may leak in extreme cases. Do not touch the leaked liguid directly with your hands or skin.

Rinse immediatelywith soap and water in case of contact. lf the leaked liguid comes into contact with your

eyes, rinse your eves with cold water for at least 10 minutes and seek medical advice immediately.

25.At the end of the product life, lithium battery should be disposed in accordance with local regulations.

This product is for 12-Voltage vehicle (equipment) batteries. lt may be dangerous if used

with other types of batteries. Read and understand the safety instructions before using

the jump starter. Fail to follow the safety instructions may cause Damage to the jump

starter, and may also result in electric shock, explosions, fire, property damage, and

personal injury.

2. Do not use this device as a car battery.

3. Do not use this device as a toy.

4. Be careful to use it when there are children around to avoid injury.

Unit fails to jump-start

USB power port fails to power

001 002 003 004

005 006

ENGLISH

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Thank you for your support of our original Audew products,

Andeman has upgraded the original products, launched a

more efficient jump starter, and enriched the product line by

adding car repair and maintenance products. We hope that

this brand can bring you a one-stop shopping experience for

auto supplies and meet the needs of all users for auto supplies.

007 008

PRODUCT OVERVIEW

PACKAGE CONTENTS

HOW TO USE

DISPLAY SCREEN DESCRIPTION

SPECIFICATIONS

HOW TO CHARGE Epower-166

How to use the light?

FAQ

TOXIC AND HAZARDOUS SUBSTANCES

Essential Version

1. USB 5V/3A

2. USB 5V/2A

3. Charge port

4. LED light switch

5. Main switch

6. DO anti-reverse insertion

car start entrance

7. LED Lighting

Starting power supply

Epower-166 ×1

type-C charging cable×1 User Manual ×1 Storage box ×1

①

Smart clamps×1

1.Battery power percentage

2.USB input/output

3.Floodlight

4.Charging display

Step 1 Step 2 Step 3 Step 4

①Turn on the power

②Plug the jumper

cables into the 12V

vehicle start port

Notice：

1.Before starting the car, please make sure that the remaining power of the product is more than 60%

2.lf a second start is required, it needs to be started every 30 seconds

3.Remove jumper clamps from vehicle battery within 30 seconds onceengine starts

start the vehicle remove jumper

clamps

connect the RED clamp

to vehicle battery's

positive(+)terminal

and BLACK clamp to

negative(-)terminal

1.Insert the Type-C charging cable into the Input port of the startup power supply.

2.Insert the USB port of the charging cable Into the adapter (Note:AC adapter is not included).

3.Plug the AC adapter into a power source.

AC adapter type-C Charging cable

Input

A: Press and hold the power button for 3 seconds to turn off the power.

Note: The Epower-166 startup power supply is able to detect its own battery status

and can take measures to save power, such as entering sleep mode when the battery is

very low.(The switch is set to shut down automatically in 15 seconds)

2. Q: When the battery is fully charged, how long can the power be

retained in the battery without using the starting power supply Epower-166 ?

A:If placed in storage, the battery can hold about 2 years of charge. However, it is

recommended that you charge it every 1 month, because this can extend the overall

life of the battery

Q: What is the expected service life of the starting power Epower-166 ?

A:lt could last for around five years if kept in good condition . The battery should support

around 500 recharges from 0 to 100%.

Q: Can I charge my phone or tablet with the boot power Epower-166 ?

A:Yes, the boot power Epower-166 includes two standard USB output ports. Just

connect any mobile device to one of these two ports and you can charge it. High

power charging is required via a USB port cable that supports fast charging.

Details on output current and voltage are on page 4.

Indicate all homogeneous materials' hazardous substances content are below

the MCV limit specified in theStandard 2002/95/EC(RoHs).

If the following operations can not solve your problems, please stop using the

device and contact the manufacture with E-mail

LED Flashlight LED light button

1. ①Press the on button once

②Press and hold

the LED light button

for 3 seconds to

make the light on.

2.Press the LED light

button 2nd time to

make the light

Strobe mode.

3. Press the LED light

button 3rd time to

make the light SOS

mode.

4. Press the LED light

button 4th time to

make the light off.

Llghtlng Strobe llght SOS off

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

②

③

④

⑥

⑤

⑦

LAMP

OUT

5V 3A

USB

LED LED LED LED

MULTI-FUNCTION

MODEL

Epower-166

User Manual

Jump Starter

Power bank

Car electronics

Torch

JUMP STARTER

Name：VISHTEC ltd

Add：3 rd floor office 5, Plovdiv 2 Liuben

Name：CET Product Service Ltd.

Add：Beacon House Stokenchurch Business Park,

Ibstone Rd, Stokenchurch, High Wycombe,

Buckinghamshire, UK

Email: [email protected]

Karavelov bul, 4002 Bulgaria

Email：[email protected]

CATALOG

ENGLISH

DEUTSCH

FRANÇAIS

001-008

009-016

017-024

ITALIANO 025-032

SPAGNOLO 033-040

andeman.com