User guide.
WARNING! To reduce the risk of serious injury, read the User Guide
before operating your nutribullet
Flip
™
. Save these instructions. Be
sure anyone who uses the nutribullet
®
knows how to do so safely.
21
Important safeguards.
When operating your nutribullet Flip
™
, remember: SAFETY COMES FIRST.
WARNING! To avoid the risk of serious injury, death, property damage, or damage
to your device, carefully read all instructions before operating your nutribullet Flip
™
.
When using any electrical appliance, basic safety precautions should always be
observed, including the following important information. READ CAREFULLY AND
THOROUGHLY BEFORE OPERATING.
If you let anyone else use your nutribullet Flip
™
, make sure that they understand the
health and safety information in this User Guide, as well as any additional safety or
usage instructions provided. Each person using a device should read the User Guide
completely, and become familiar with the safe operation of the unit.
READ ALL INSTRUCTIONS CAREFULLY AND THOROUGHLY
BEFORE OPERATING.
PERSONAL SAFETY:
WARNING! DO NOT BLEND
HOT, WARM, CARBONATED, OR
EFFERVESCENT INGREDIENTS.
Such use may pressurize the Cup
during blending, potentially causing
the Lid to open forcefully, or the Cup
and Motor Base, Blade, and Lid to
separate from the Cup. This could
expel hot ingredients and cause
exposure to the blade, potentially
resulting in bodily injury and/or
property damage.
Only blend room-temperature or
refrigerated ingredients (70°F/21°C
or cooler).
Carbonated and eervescent
ingredients (e.g., soda, baking
powder, baking soda, yeast, some
batters, cake mix, dry ice, or other
things that become bubbly) release
gasses that increase pressure within
the Cup when blending. Some protein
powders also include eervescent
ingredients. Always check your
ingredients before blending.
Remove all utensils and non-food
items from Cup before operating to
prevent bodily injury, or damage to the
blade or Cup.
Do not expose your nutribullet Flip
™
to extreme temperatures or leave
in the freezer or refrigerator, as this
can damage the batteries, seals, and
other components.
WARNING! DO NOT BLEND
CONTENTS FOR MORE THAN ONE
MINUTE. DO NOT RUN CONSECUTIVE
BLENDING CYCLES THAT EXCEED ONE
MINUTE TOTAL.
The friction created by the blending
process builds heat inside the Cup.
Blending continuously for more than
one minute increases this risk of
pressurization. Consecutive blending
cycles that exceed one minute total
may over-pressurize the Cup, causing
the Lid to open forcefully, or the Cup
and Motor Base, Blade, and Lid to
separate from the Cup. This could
expel hot ingredients and cause
exposure to the blade, potentially
resulting in bodily injury and/or
property damage.
• Do not open the Lid or remove the
Motor Base, Blade, and Lid from the
Cup until the blades have come to a
comple stop. Blades can still activate
when the Motor Base, Blade, and Lid
is opened.
• DO NOT insert finger or any object
in the sip/straw hole while the motor
is activated and the blades are
spinning. Failure to follow these
precautions may result in bodily
injury, property damage, or
damage to your unit.
WARNING! DO NOT LEAVE
BLENDED FOODS IN A SEALED CUP
FOR PROLONGED PERIODS OF TIME.
If left inside a sealed Cup, a blended
mixture may spoil and ferment.
During fermentation, the mixture may
release gases that build pressure
inside the Cup. Over-pressurization
may cause the Lid to open forcefully,
or the Cup and Motor Base, Blade,
and Lid to separate from the Cup. This
could cause exposure to the blade,
potentially resulting in serious bodily
injury, property damage, or damage
to your unit. Do not leave blended
ingredients in the sealed Cup for a
prolonged period of time.
To release pressure in the Cup, open
the Lid to the drinking spout pointing
away from your face and body. Always
exercise caution, being mindful of
escaping steam, gases, or foodstus
that may splatter or spray out.
CUP CAUTION:
• Always use caution when opening
the Lid. Open the Lid slowly with the
opening pointed away from your
face and body, being mindful of any
splattering that may occur.
CUP SAFETY:
Proper Cup use is important for the
safe operation your nutribullet Flip
™
.
Using the Cup inconsistent with these
instructions may result in bodily injury,
property damage, or damage to
your unit.
• Use only nutribullet
®
attachments/
accessories specifically designed
for your nutribullet Flip
™
. Always use
genuine nutribullet
®
replacement
parts and accessories. Aftermarket
parts are not made to nutribullet
®
specifications and may damage
your unit or cause serious injury.
• The manufacturer does not
recommend the use of attachments,
including canning jars, with the
nutribullet Flip
™
. Attempting to use
attachments not included with the
product’s configuration may result in
injury to persons.
• ALWAYS ensure the Cup is securely
tightened and locked onto the
Motor Base, Blade, and Lid before
blending. The motor will not turn
on unless the Cup is situated in the
locked position.
• ONLY operate the unit with the Lid
cover snapped in place.
• Never operate your nutribullet Flip
™
while the Cup is empty.
• DO NOT exceed the MAX line.
Exceeding the MAX line can jam the
blade or cause leakage.
• NEVER remove the Cup or open the
Lid while the unit is in operation.
• DO NOT overfill the Cup with ice,
as this may impede blade rotation,
which can result in damage to the
unit or injury. Always be sure to
!
Save these instructions!
FOR HOUSEHOLD USE ONLY
43
• Do not place your nutribullet Flip
™
on
uneven or unstable surfaces.
• Do not dry your device with a hair
dryer, clothes dryer, conventional
oven, or microwave oven. If your
device becomes wet, gently wipe the
exterior with a clean, dry cloth.
• Do not use your device near water or
in wet, rainy, or snowy conditions.
• Do not use your device near an
open flame or other heat source; near
areas of excessive dirt, dust,
oil, or chemicals; or in direct sunlight.
• Do not expose your nutribullet Flip
™
to extreme temperatures, it can
cause the batteries to rupture
or explode.
GENERAL USE AND SAFETY:
WARNING! FAILURE TO FOLLOW
ALL INSTRUCTIONS REGARDING
YOUR NUTRIBULLET FLIP
™
MAY
RESULT IN PROPERTY DAMAGE,
SERIOUS PERSONAL INJURY, OR
DEATH.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory, or mental
capabilities; or lack of experience
and knowledge, unless they are
closely supervised and instructed
concerning the use of the appliance
by a person responsible for their
safety. Close supervision is necessary
when any appliance is used by or
near children. Children should be
supervised to ensure they do not
play with the appliance.
• Periodically inspect your nutribullet
Flip
™
components for damage
or wear that may impair proper
functioning or create a safety hazard.
• Be aware of possible hazards
when charging, using, or storing
your nutribullet Flip
™
.
• Do not use this blender for anything
other than its intended use.
• Avoid contact with moving parts.
Do not attempt to defeat any safety
interlock mechanisms.
• Do not insert anything other than
the appropriate charger into the
USB-C port. Do not allow dust, dirt
or moisture to accumulate inside
the port.
• Do not crush, drop, or damage the
Motor Base, Blade, and Lid. Do
not operate if this component is
damaged in any manner. Contact
Customer Service for assistance at
AU: 1300 285 538 /
NZ: 0800 232 633.
WARNING! MODIFICATION,
IMPROPER USE, AND FAILURE
TO FOLLOW INSTRUCTIONS CAN
INCREASE THE RISK OF PROPERTY
DAMAGE, SERIOUS PERSONAL
INJURY, OR DEATH.
• Only use the Charging Cable and
Power Supply that came with
your unit.
• Do not charge this appliance
with any other charger or attempt
to use the Power Supply on any
other product.
• NEVER USE UNAPPROVED POWER
SOURCES OR RAPID CHARGERS.
• To avoid the risk of electrical shock,
fire, or bodily injury, DO NOT charge
or use in wet conditions, or immerse
the Charging Cable, Power Supply,
or Motor Base, Blade, and Lid in
water or other liquids.
• Do not operate the unit if there is
damage to the Charging Cable or
Power Supply, if there has been an
appliance malfunction, or if the
Motor Base, Blade, and Lid has
been dropped or damaged in any
manner. Contact Customer Service
for assistance at AU: 1300 285 538 /
NZ: 0800 232 633.
• Always UNPLUG the nutribullet Flip
™
and allow the unit to completely
SHUT DOWN when not in use, and
BEFORE assembling, disassembling,
changing accessories, or cleaning.
Your nutribullet Flip
™
will SHUT
DOWN automatically when left
• add a sucient amount of liquid to
the Cup before blending.
• Only use genuine nutribullet
®
parts. Order replacement parts
from bulletbrands.com.au /
bulletbrands.co.nz.
BLADE SAFETY:
WARNING! BLADES ARE SHARP!
HANDLE WITH CARE TO AVOID
BODILY INJURY.
• Do not touch the sharp edges of
the blades.
• Do not place hands or fingers near
the blades when attaching the Cup
to the Motor Base, Blade, and Lid.
• Handle with care when washing the
blade by hand.
• Always ensure the power is o and
the charger is unplugged when
assembling, disassembling, or
cleaning the blade or Motor Base,
Blade, and Lid.
• Do not store the Motor Base, Blade,
and Lid with the blades exposed.
Always cover the blade with either
the Cup or Blade Cover.
BLADE CARE CAUTION:
WARNING! DISCONTINUE
USE IF THE BLADE IS BENT
OR DAMAGED.
• Routinely inspect the blades for
damage, and if detected, contact
Customer Service for blade
replacement.
SURROUNDING SAFETY:
WARNING! DO NOT USE YOUR
NUTRIBULLET FLIP
™
WHILE DRIVING,
OPERATING MACHINERY, CYCLING,
WALKING, OR ENGAGING
IN OTHER ACTIVITIES THAT REQUIRE
YOUR UNDIVIDED ATTENTION.
undisturbed for 90 seconds.
• Do not charge your device around
flammable materials, on your bed
or couch, or on top of any type
of paper.
• Using incompatible parts or
aftermarket accessories may damage
your nutribullet Flip
™
or create safety
hazards that may cause personal
injury or property damage.
WARNING! FAILURE TO TAKE THE
FOLLOWING PRECAUTIONS CAN
RESULT IN SERIOUS PERSONAL
INJURY, DEATH FROM ELECTRIC
SHOCK OR FIRE, OR DAMAGE TO
YOUR DEVICE.
WARNING! DO NOT USE THE
POWER SUPPLY WITH A VOLTAGE
CONVERTER DEVICE OR ADAPTER.
• Do not use non-standard power
sources, such as generators or
inverters. Use only AC power
provided by a standard wall outlet or
automobile lighter port.
• Exposed device cables and cords pose
a potential tripping hazard. Arrange
all cables and cords so that people
and pets are not likely to trip over
or accidentally pull on them as they
move around or walk through
the area.
• Do not let the Charging Cable hang
over the edge of a table or counter.
LITHIUM-ION
BATTERIES:
Your nutribullet Flip
™
contains rechargeable
lithium-ion batteries. The batteries are not
replaceable and must be recycled or
disposed of properly. Consult your local
council for information regarding available
recycling and/or disposal options. Improper
disposal may result in injury, death, or prop-
erty damage as a result of fire, overheating,
or explosion.
65
• The motor base is equipped with a
Lithium-Ion battery, and it is very
important to never dispose of it in
regular household waste. Lithium-Ion
batteries in compacting rubbish trucks
pose a risk of ignition.
• Opening and/or repairing or
attempting to replace the batteries to
your device can cause electric shock,
device damage, fire, and personal
injury, or property damage.
• Do not expose the Motor Base
containing the Lithion-Ion battery pack
to fire or excessive heat. Exposure to
fire or temperatures above 130°C may
damage the batteries and cause
an explosion.
• Do not recharge your nutribullet
Flip near a fire, heat source, or in
extremely hot conditions.
• Recommended storage and ambient
charging temperature: 10°C−40°C.
• Do not use your unit in any area with a
potentially explosive atmosphere (e.g.,
fueling areas or fuel service stations,
below decks on boats or other vessels,
fuel and/or chemical transfer and
storage facilities, and areas where
flammable chemicals or particles,
such as grain dust or metal powders
have collected in the air). In such
areas, sparks can occur and cause an
explosion or fire.
• Do not use your unit if the Motor Base
is overheated, has an odor, is bulging,
or changes in color/shape.
PRODUCT SAFETY:
• NEVER PLACE THE MOTOR
BASE, BLADE, AND LID IN
THE DISHWASHER.
• Do not blend stone fruit in this
appliance unless pits/seeds have
been removed. Hard ingredients
may damage the blade.
• The blades may stop turning if the
Cup is overfilled or if there is an
insucient amount of liquid in the
Cup. If this occurs, please refer to
the Errors section in this User Guide.
• Do not attempt to clean the Motor
Base, Blade, and Lid by immersing
it in water or other cleaning liquids.
Follow the instructions in the Care &
Maintenance section on page 20.
• Only the Cup and plastic accessories
of the nutribullet Flip
™
are
dishwasher-safe. If you choose to
clean these in the dishwasher, only
place them on the top rack of the
dishwasher and do not run the heat
or sanitizing cycle.
• Do not overload your wall outlet.
Confirm that it is rated to handle the
total current (in amps) drawn by your
device (as indicated on your Power
Supply Unit) and any other devices
using the same circuit.
• Never use a damaged Power Supply,
or one that has been dropped or
received a sharp impact.
• Do not charge in an area of extreme
heat or cold.
• Always unplug the Power Supply
when not in use.
CABLE AND CORD SAFETY:
WARNING! USE ONLY THE
CHARGING CABLE THAT CAME
WITH YOUR NUTRIBULLET FLIP
™
TO CHARGE.
• Inspect your Power Supply and
cables regularly.
• Do not wrap or wind the Charging
Cable too tightly when storing. Do
not bend or crease the Charging
Cable when using.
• When positioning your device or
Power Supply, ensure that the cables
are not bent sharply and that the
connectors are not pushed against a
wall or hard surface.
• Do not allow pets or children to bite
or chew on cables and cords.
• Always disconnect the Power Supply
from the outlet by pulling on the plug
portion of the block. Never pull on the
Charging Cable to remove the Power
Supply from the wall.
• Do not let the Charging Cable touch
hot surfaces or any extreme heat
source, or become knotted, tangled,
or frayed.
• Do not grab or carry your device by
the Charging Cable.
• The recommended storage and
ambient charging temperature
range for this device is between
50°F−104°F (10°C−40°C).
!
Save these
instructions!
87
Contents.
Thank you for purchasing the nutribullet
®
Flip.
1 Important safeguards
9 What’s included
9 Before first use
10 Assembly guide
11 LED indicators
13 Using your nutribullet
Flip
™
16 Using the To-Go Lid
18 Troubleshooting
20 Care & maintenance
22 Replacement parts
23 nutribullet
Flip
™
One-Year Limited Warranty
Assembly guide.
*
Assembly Guide
carry handle
fl ip-top lid
one-button
interface
motor base,
blade, & lid
USB-C
charging port
590ml* Tritan
blending cup with
silicone grip
109
Remove all packaging materials, stickers, and the like, and clean
your unit with care according to the instructions detailed in the Care
& Maintenance section (pg. 20).
Charge the unit for at least 2 hours using the provided USB-C
Charging Cable and Charging Block.
What’s included.
Before fi rst use.
WARNING! DO NOT exceed the MAX fill capacity. 590ml total Cup
capacity. 475ml MAX fill line capacity.
What’s included.
base
(motor base,
blade & lid)
blending cup USB-C
charging cable
& charging block
to-go lidcleaning brush
blade cover
motor base & tumbler lid with blade
Travel Lid
OPP Blending Cup
cleaning brush
USB-C Charging Cable & Charging block
Blade Cover
1211
LED indicators.
The nutribullet Flip
™
’s indicator has six LED light bars that appear white,
yellow, red, or green according to the unit’s operational status. The
meaning of each display is detailed below.
LED Control Panel - Sleep Mode
z
z
LED Control Panel - Sleep Mode
30
sec
LED Control Panel - Blend Mode
LED Control Panel - Wake
NO POWER:
All LEDs o.
PLUGGED IN:
When plugged in to charge,
the color of LED indicates
charge status.
SOLID GREEN: full charge.
FLASHING GREEN: ready for
normal use.
FLASHING YELLOW: low charge,
can run several cycles.
FLASHING RED: needs charging,
do not use to blend.
Settings.
Charging.
WAKE:
Press the Power button once to
wake up your blender.
The LED ring will illuminate in a
clockwise direction. When the
ring is fully illuminated, the unit
is ready to blend.
WHITE: ready for normal use.
YELLOW: low charge, can run
several cycles.
RED: needs charging, do
not use.
SLEEP MODE:
After 90 seconds of inactivity,
your blender will automatically
SHUT DOWN/go into sleep mode.
When the ring light is o, the
blender is powered o.
BLEND MODE:
Press the Power button to start
a 30-second blend cycle.
White LEDs circulate clockwise
during the blending cycle.
LED light bars
LED Control Panel - Error
DURING USE:
FLASHING YELLOW: use error,
refer to pg. 19 to diagnose issue
FLASHING RED: functional error.
Immediately discontinue use of
your blender. Refrain from pressing
the Power Button for at least 90
seconds to allow the unit to shut
down automatically, then refer to
the troubleshooting guide on page
19 for details.
1413
Using the
nutribullet Flip
™
.
1 Place the Blending Cup
on a clean, dry, and
level surface.
2 Twist o the Motor Base,
Blade, and Lid and add
ingredients.
NOTE: Make sure you don’t overfi ll
the Cup. Follow the minimum
liquid and MAX fi ll marks on the
Cup. When adding ice, it should
not exceed 25% of the Cup’s total
volume. Always add a su cient
amount of liquid ingredients.
Place the blending cup on a clean, dry, and level surface
Twist o the motor base/lid and insert your ingredients
3 Twist the Motor Base,
Blade, and Lid
back onto the Blending
Cup. Make sure the
Flip-Top Lid is snapped
closed and sealed.
Twist the motor base back onto the blending cup 2Twist the motor base back onto the blending cup 1
4 With the blender right
side-up (Motor Base, Blade,
and Lid on top), press the
Power Button once to wake
up the blender. Wait about 1
second for the LED light ring
to fully illuminate.
NOTE: The LED light ring will fully
illuminate white if the Motor Base,
Blade, and Lid is properly installed.
If the Motor Base, Blade, and Lid is
installed incorrectly, the LED light
ring will fl ash yellow.
Wake up your blender by pressing the power button once
5 When ready, press the
Power Button again to
begin a 30-second
blending cycle.
NOTE: To prevent blade
blockage or stalling, start
the blending cycle with the
blender right-side-up (Motor Base,
Blade, and Lid on top).
When ready, press the power button again to start a xx-second blending cycle
Make sure the drinking spout is snap closed and sealed.
WARNING! NEVER open the
Flip-Top Lid or attempt to place
anything into the sip hole
while the motor is running to
prevent injury or damage.
1615
6 Once blending begins,
fl ip your blender upside-
down (Motor Base, Blade,
and Lid on bottom) so the
ingredients make contact
with the blade. Place the
blender on a clean, dry, and
level surface until blending
is complete.
NOTE: If you want to Pulse your
ingredients or stop the blending
cycle early, press the Power Button
during the blending cycle.
Once blending has begun, flip your blender upside-down so the
ingredients make contact with the blade
7 Once blending is complete,
fl ip your blender so the
Motor Base, Blade, and Lid
is right-side-up and open
the Flip-Top Lid to enjoy
your blend.
Once blending is complete, flip your blender right-side-up, and open the flip-top-lid
8 Use the Carry Handle to
take your blend on the go.
WARNING! NEVER open the
Flip-Top Lid or attempt to place
anything into the sip hole
while the motor is running to
prevent injury or damage.
Use the carry handle to take your blend with you
Using the to-go lid.
1 Remove, clean, and
dry the Motor Base, Blade,
and Lid. Cover with the
Blade Cover before storing.
2 Twist on the To-Go Lid.
Cover Motor Base/Lid with the blade cover before storing.
Twist on the To-Go Lid.
Your nutribullet Flip
™
also comes with a twist-on To-Go Lid that you
can swap with the Motor Base, Blade, and Lid. The To-Go Lid o ers
two ways to enjoy your blend: through a sipping spout at the front of
the Lid, or through the straw opening in the center of your Lid.
1817
3 To open the sipping spout,
unsnap the cover fl ap from
the front of the To-Go Lid,
then fl ip it all the way over,
snapping it into place at
the opposite side of the
To-Go Lid.
Once blending is complete, flip your blender right-side-up, and open the flip-top-lid 2
To reveal the opening, keep the sipping spout cover flap closed and slide the
center tab towards the back of the Lid.
4 The nutribullet
®
tab at the
center of the To-Go Lid
covers the straw opening.
To reveal the opening, keep
the sipping spout cover fl ap
closed and slide the center
tab towards the back of
the To-Go Lid.
NOTE: The To-Go Lid is
not leak-proof and will
not prevent blends from
seeping or spilling out of the
Cup. Be sure to always keep
your Cup upright when
using the To-Go Lid.
Troubleshooting.
WARNING!
Before first use, review all
warnings and caution statements
in the important safeguards section
(pages 1-6).
ALWAYS use caution when opening the
Flip-Top Lid. ALWAYS power off unit
before opening the Flip-Top Lid Cap
slowly, being mindful that the spraying
of contents may occur.
NEVER try to operate your
nutribullet Flip
™
while driving or while
engaging in other situations that
require your
undivided attention.
NEVER use a rapid charger or a
higher-wattage charger. Use only
the AC power provided.
NEVER use the charger with any
voltage converter device or adapter.
O N LY use the Power Supply and
Charging Cable that came with
your unit.
NEVER start your car with the unit
plugged into the automobile lighter
port, as this can potentially cause a
power surge that will damage the
electronics.
DON’T leave your nutribullet Flip
™
unattended when in use.
DON’T charge your nutribullet Flip
™
if
your USB-C charging port is wet,
damaged, or dirty.
NEVER add hot or warm ingredients to
your Blending Cup. Heated ingredients
can cause pressure to build inside the
Cup potentially causing the Flip-Top
Lid to open forcefully, or the Cup and
Motor Base, Blade, and Lid to separate
from the Cup. This could expel hot
ingredients and cause exposure to the
blade, potentially resulting in bodily
injury and/or property damage.
DO NOT blend contents for more than
one minute. Do not run consecutive
blending cycles that exceeds one
minute total. The friction created by
the blending process builds heat inside
the Cup. Consecutive blending cycles
that exceed one minute total may
over-pressurize the Cup, potentially
causing the Flip-Top Lid to open
forcefully, or the Cup and Motor Base,
Blade, and Lid to separate from the
Cup. This could expel hot ingredients
and cause exposure to the blade,
potentially resulting in bodily injury
and/or property damage.
Batteries are not replaceable. NEVER
try to open, repair, or attempt to
replace the batteries to your unit.
20
19
Care & maintenance.
When cleaning the nutribullet Flip
™
, always unplug and power off
the unit, making sure the blades are completely stopped before
assembling or disassembling.
WARNING! NEVER submerge or rinse the entire Motor Base, Blade,
and Lid in water or any other liquid, and be sure to keep water and
other liquids away from the USB-C port.
You may use a blending cycle to quickly clean your blender.
Cleaning.
AUTOMATIC CLEANING:
1 Rinse out the Blending
Cup with fresh water. Add
a drop of dish soap to the
Blending Cup and fi ll
halfway with water.
NOTE: For stubborn residue, allow
the soap and water to sit for a
few minutes on each end of the
Blending Cup before running the
cleaning cycle.
2 Start a blending cycle, and
fl ip and shake the blender
to agitate the water during
the cycle.
Add cold water
Flip the blender and shake during the cycle
FLASHING LED COLOR: YELLOW
TROUBLESHOOTING:
Unit will not power on.
TROUBLESHOOTING:
Blades may be blocked.
SOLUTION:
Continue to tighten the Blending
Cup to the Motor Base, Blade,
and Lid until the LED light ring
turns white.
SOLUTION:
Carefully dislodge any ingredients
that are stuck in the blade.
Ensure you are using an adequate
amount of liquid, the Cup is not
overfilled, and ingredients all
fall below the MAX fill line.
To prevent blade blockage or
stalling, start the blending cycle
with the Motor Base,
Blade, and Lid right-side-up.
(Motor Base is on top).
Always ensure the Blending Cup is
securely fastened to the Motor
Base, Blade, and Lid before
blending. NEVER try to remove
the Cup from the Motor Base
before the cycle is complete.
FLASHING LED COLOR: RED
TROUBLESHOOTING:
Overheat and automatic
lockout.
SOLUTION:
Immediately discontinue
use and allow the blender to
cool down. If the blender remains
locked after 10 minutes of cooling
off, contact Customer Service.
2221
For replacement
parts.
Visit bulletbrands.com.au /
bulletbrands.co.nz or call
Customer Service at AU: 1300 285
538 / NZ: 0800 232 633.
3 After the cycle ends, open
the Flip-Top Lid that covers
the sip hole and empty the
contents. Repeat the cycle
once more, using only fresh
water for the fi nal rinse.
Do not add soap.
4 Dry the Motor Base, Blade,
and Lid upright with the
Flip-Top Lid open.
NOTE: Make sure and pat the
USB-C port dry before you
begin charging.
motor base & tumbler lid with blade
Twist the motor base back onto the blending cup 2Twist the motor base back onto the blending cup 1
Once blending is complete, flip your blender right-side-up, and open the flip-top-lid 2
CLEANING BY HAND:
MOTOR BASE, BLADE, AND LID:
When hand-cleaning, always be
mindful not to rinse/submerge
the entire Motor Base, Blade,
and Lid in water, and take care
to prevent water from entering
the USB-C port.
• Blade: point downward at an
angle and carefully clean and
rinse only the blade area of
the Motor Base, Blade, and
Lid, keeping your thumb or
finger over the USB-C port.
• Drinking Spout: with the
blade facing up, carefully
rinse out the sip hole under
a gentle flow of warm water,
keeping your thumb or finger
over the USB-C port.
Use the included Cleaning
Brush to help clean the straw,
under the blades, sip hole, and
vent hole.
To dry, gently wipe and dry the
Motor Base, Blade, and Lid
and the USB-C port with a
clean cloth. Rest the Motor
Base upright with the Flip-Top
Lid open. Make sure the
USB-C port is completely dry
before charging.
WARNING! DO NOT submerge
or rinse the entire Motor Base,
Blade, and Lid in water or any
other liquid.
Always keep your nutribullet
Flip
™
in a dry, temperature-
controlled location. Always
store the Motor Base, Blade,
and Lid with the Cup or Blade
Cover attached, so the blades
are covered and not exposed.
Do not stack any objects on top
of the unit while storing.
The Blending Cup and To-Go
Lid are the only components
of the nutribullet Flip
™
that are
dishwasher-safe, in the top rack
only. To clean the blade and sip
hole, follow the Hand Cleaning
instructions above.
WARNING! DO NOT
place your Motor Base,
Blade, and Lid in
the dishwasher.
Storage.
DISHWASHER:
BLENDING CUP:
Wash with soap and water.
2423
• The item has not sustained
damage through foreign
objects, substances or accident.
YOUR WARRANTY
DOES NOT COVER:
• Components that are
subject to natural wear
and tear caused by
normal use in accordance
with operating instructions.
• Unauthorised/improper
maintenance/handling or
overload is excluded from
this warranty.
• For guarantee claims, you
will need to submit a proof
of purchase in the form of
a valid receipt that displays
date and place of purchase.
This warranty does not replace
but is in addition to your
statutory rights.
This warranty does not apply
to accessories supplied with
the item.
This warranty applies only to
the original purchaser and
may not be transferred.
Replacement items will
be covered by the limited
warranty for the balance of the
warranty period from the date
of the original purchase.
PLEASE NOTE:
Only the defective product
or parts returned to place of
purchase will be replaced
under this warranty.
NEW ZEALAND
PO Box 100-707
NSMC
Auckland 0745
0800 232633
bulletbrands.co.nz
AUSTRALIA
PO Box 574
South Morang
Victoria 3752
1300 285538
bulletbrands.com.au
nutribullet
®
is a registered trademark of CapBran Holdings, LLC.
Copyright © 2024 CapBran Holdings, LLC. All rights reserved.
Los Angeles, CA 90024, USA. Made in China.
If your product becomes
defective due to faulty
material or workmanship
within a period of 1
year from the date of
purchase, we warrant
to do the following:
• For New Zealand Consumers:
We will replace the product
with a new product, free of
charge, or repair the product
at our cost, at our discretion.
• For Australian Consumers:
Our goods come with
guarantees that cannot be
excluded under the Australian
Consumer Law. You are
entitled to a replacement or
refund for a major failure
and for compensation for any
other reasonably foreseeable
loss or damage. You are also
entitled to have the goods
repaired or replaced if the
goods fail to be of acceptable
quality and the failure does
not amount to a major failure.
one (1) year limited
replacement warranty
statement.
YOUR WARRANTY
IS SUBJECT TO THE
FOLLOWING CONDITIONS:
• DO NOT operate the
appliance with a damaged
plug or cord, or if the unit has
been dropped, damaged or
dropped in water. To avoid
the risk of electric shock, do
not disassemble or attempt
to repair the appliance
on your own. If the supply
cord is damaged, it must
be replaced by a qualified
electrician in order to avoid
a hazard. Incorrect re-
assembly or repair can
cause a risk of electric shock
or injury to persons when the
appliance is used.
• The item has not been
misused, abused, neglected,
altered, modified or repaired
by anyone.
• The item has been subjected
to fair wear and tear.
• The item has not been used
for trade, professional or
hire purposes.
Capital Brands Distribution, LLC | All rights reserved.
nutribullet
®
and the nutribullet
®
logo are trademarks of CapBran Holdings, LLC
registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving
to improve our products, therefore the specifications contained herein are
subject to change without notice.
NBPB07350T_240611
Detachable supply unit.
