User guide.
WARNING! To reduce the risk of serious injury, read the User Guide
before operating your nutribullet
®
Flip Insulated Portable Blender.
Save these instructions. Be sure anyone who uses the nutribullet
®
knows how to do so safely.
21
Important safeguards.
When operating your nutribullet
®
Flip Insulated Portable Blender, remember:
SAFETY COMES FIRST.
WARNING! To avoid the risk of serious injury, death, property damage, or damage
to your device, carefully read all instructions before operating your nutribullet
®
Flip Insulated Portable Blender. When using any electrical appliance, basic
safety precautions should always be observed, including the following important
information. READ CAREFULLY AND THOROUGHLY BEFORE OPERATING.
If you let anyone else use your nutribullet
®
Flip Insulated Portable Blender, make
sure that they understand the health and safety information in this User Guide, as
well as any additional safety or usage instructions provided. Each person using a
device should read the User Guide completely, and become familiar with the safe
operation of the unit.
READ ALL INSTRUCTIONS CAREFULLY AND THOROUGHLY
BEFORE OPERATING.
HEAT AND PRESSURE SAFETY:
WARNING! DO NOT BLEND
HOT, WARM, CARBONATED, OR
EFFERVESCENT INGREDIENTS.
Such use may pressurize the Cup
during blending, potentially causing
the Lid to open forcefully, or the Cup
and Hybrid Motor Base, Blade, and
Lid to separate from the Cup. This
could expel hot ingredients and cause
exposure to the blade, potentially
resulting in bodily injury and/or
property damage.
Only blend room-temperature or
refrigerated ingredients (70°F/21°C
or cooler).
Carbonated and eervescent
ingredients (e.g., soda, baking
powder, baking soda, yeast, some
batters, cake mix, dry ice, or other
things that become bubbly) release
gasses that increase pressure within
the Cup when blending. Some protein
powders also include eervescent
ingredients. Always check your
ingredients before blending.
WARNING! DO NOT BLEND
CONTENTS FOR MORE THAN ONE
MINUTE. DO NOT RUN CONSECUTIVE
BLENDING CYCLES THAT EXCEED ONE
MINUTE TOTAL.
The friction created by the blending
process builds heat inside the Cup.
Blending continuously for more than
one minute increases this risk of
pressurization. Consecutive blending
cycles that exceed one minute total may
over-pressurize the Cup, causing the
Lid to open forcefully, or the Cup and
Hybrid Motor Base, Blade, and Lid to
separate from the Cup. This could expel
hot ingredients and cause exposure to
the blade, potentially resulting in bodily
injury and/or property damage.
WARNING! DO NOT LEAVE BLENDED
FOODS IN A SEALED CUP FOR
PROLONGED PERIODS OF TIME.
If left inside a sealed Cup, a blended
mixture may spoil and ferment.
During fermentation, the mixture may
release gases that build pressure
inside the Cup. Over-pressurization
may cause the Lid to open forcefully,
or the Cup and Hybrid Motor Base,
Blade, and Lid to separate from the
Cup. This could cause exposure to the
blade, potentially resulting in serious
bodily injury, property damage, or
damage to your unit. Do not leave
blended ingredients in the sealed Cup
for a prolonged period of time.
To release pressure in the Cup, open
the Lid to the drinking spout pointing
away from your face and body. Always
exercise caution, being mindful of
escaping steam, gases, or foodstus
that may splatter or spray out.
CUP CAUTION:
• Always use caution when opening
the Lid. Open the Lid slowly with the
opening pointed away from your
face and body, being mindful of any
splattering that may occur.
CUP SAFETY:
Proper Cup use is important for the
safe operation your nutribullet
®
Flip
Insulated Portable Blender. Using the
Cup inconsistent with these instructions
may result in bodily injury, property
damage, or damage to your unit.
• ALWAYS ensure the Cup is securely
tightened and locked onto the Hybrid
Motor Base, Blade, and Lid before
blending. The motor will not turn
on unless the Cup is situated in the
locked position.
• ONLY operate the unit with the Lid
cover snapped in place.
• Never operate your nutribullet
®
Flip
Insulated Portable Blender while the
Cup is empty.
• DO NOT exceed the MAX line.
Exceeding the MAX line can jam the
blade or cause leakage.
• NEVER remove the Cup or open the
Lid while the unit is in operation.
• DO NOT overfill the Cup with ice,
as this may impede blade rotation,
which can result in damage to the
unit or injury. Always be sure to
add a sucient amount of liquid to
the Cup before blending.
• Only use genuine nutribullet
®
parts.
Order replacement parts from
nutribullet.com or by contacting
Customer Service.
BLADE SAFETY:
WARNING! BLADES ARE SHARP!
HANDLE WITH CARE TO AVOID
BODILY INJURY.
• Do not touch the sharp edges of
the blades.
• Do not place hands or fingers near
the blades when attaching the Cup
to the Hybrid Motor Base, Blade,
and Lid.
• Handle with care when washing the
blade by hand.
• Always ensure the power is o and
the charger is unplugged when
assembling, disassembling, or
cleaning the blade or Hybrid Motor
Base, Blade, and Lid.
• Do not store the Hybrid Motor Base,
Blade, and Lid with the blades
exposed. Always cover the blade with
either the Cup or Blade Cover.
• Do not open the Lid or remove the
Hybrid Motor Base, Blade, and Lid
from the Cup until the blades have
come to a comple stop. Blades can
still activate when the Hybrid Motor
Base, Blade, and Lid is opened.
• DO NOT insert finger or any object
in the sip/straw hole while the
motor is activated and the blades
are spinning. Failure to follow these
precautions may result in bodily
injury, property damage, or
damage to your unit.
!
Save these instructions!
FOR HOUSEHOLD USE ONLY
43
• Do not expose your nutribullet
®
Flip Insulated Portable Blender to
extreme temperatures or leave in
the freezer or refrigerator, as this
can damage the batteries, seals,
and other components.
• Do not place your nutribullet
®
Flip
Insulated Portable Blender on
uneven or unstable surfaces.
• Do not dry your device with a hair
dryer, clothes dryer, conventional
oven, or microwave oven. If your
device becomes wet, gently wipe the
exterior with a clean, dry cloth.
• Do not use your device near water or
in wet, rainy, or snowy conditions.
• Do not use your device near an
open flame or other heat source; near
areas of excessive dirt, dust,
oil, or chemicals; or in direct sunlight.
• Do not leave your nutribullet
®
Flip Insulated Portable Blender inside
your vehicle, especially in the summer
or winter. Prolonged exposure to
extreme temperatures can cause the
batteries to leak, rupture, or explode.
GENERAL USE AND SAFETY:
WARNING! FAILURE TO FOLLOW
ALL INSTRUCTIONS REGARDING
YOUR NUTRIBULLET
®
FLIP INSULATED
PORTABLE BLENDER MAY RESULT
IN PROPERTY DAMAGE, SERIOUS
PERSONAL INJURY, OR DEATH.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory, or mental
capabilities; or lack of experience
and knowledge, unless they are
closely supervised and instructed
concerning the use of the appliance
by a person responsible for their
safety. Close supervision is necessary
when any appliance is used by or
near children. Children should be
supervised to ensure they do not
play with the appliance.
• Periodically inspect your nutribullet
®
Flip Insulated Portable Blender
components for damage or wear that
may impair proper functioning or
create a safety hazard.
• Be aware of possible hazards
when charging, using, or storing
your nutribullet
®
Flip Insulated
Portable Blender.
• Do not use this blender for anything
other than its intended use.
• Avoid contact with moving parts.
Do not attempt to defeat any safety
interlock mechanisms.
• Do not insert anything other than the
appropriate charger into the USB-C
port. Do not allow dust to accumulate
inside the port.
• Do not crush, drop, or damage the
Hybrid Motor Base, Blade, and Lid.
Do not operate if this component is
damaged in any manner. Contact
Customer Service for assistance at
1 (800) 523-5993.
• Use only nutribullet
®
attachments/
accessories specifically designed
for your nutribullet
®
Flip Insulated
Portable Blender. Always use
genuine nutribullet
®
replacement
parts and accessories. Aftermarket
parts are not made to nutribullet
®
specifications and may damage
your unit or cause serious injury.
• The manufacturer does not
recommend the use of attachments,
including canning jars, with the
nutribullet
®
Flip Insulated Portable
Blender. Attempting to use
attachments not included with the
product’s configuration may result in
injury to persons.
• Do not attempt to clean the
Hybrid Motor Base, Blade, and
Lid by immersing it in water or
other cleaning liquids. Follow
the instructions in the Care &
Maintenance section on page 20.
• Only the Cup and plastic accessories
of the nutribullet
®
Flip Insulated
Portable Blender are dishwasher-
safe. If you choose to clean these
in the dishwasher, only place them
on the top rack of the dishwasher
and do not run the heat or sanitizing
cycle. NEVER PLACE THE HYBRID
MOTOR BASE, BLADE, AND LID
IN THE DISHWASHER.
ELECTRIC SAFETY:
WARNING! MODIFICATION,
IMPROPER USE, AND FAILURE
TO FOLLOW INSTRUCTIONS CAN
INCREASE THE RISK OF PROPERTY
DAMAGE, SERIOUS PERSONAL
INJURY, OR DEATH.
• Only use the Charging Cable and
Charging Block that came with
your unit.
BLADE CARE CAUTION:
WARNING! DISCONTINUE
USE IF THE BLADE IS BENT
OR DAMAGED.
• Routinely inspect the blades for
damage, and if detected, contact
Customer Service for blade removal
and replacement.
• Remove all utensils and non-food
items from Cup before operating to
prevent bodily injury, or damage to
the blade or Cup.
• Do not blend stone fruit in this
appliance unless pits/seeds have
been removed. Hard ingredients
may damage the blade.
• The blades may stop turning if the
Cup is overfilled or if there is an
insucient amount of liquid in the
Cup. If this occurs, please refer to
the Errors section in this User Guide.
SURROUNDING SAFETY:
WARNING! DO NOT USE YOUR
NUTRIBULLET
®
FLIP INSULATED
PORTABLE BLENDER WHILE DRIVING,
OPERATING MACHINERY, CYCLING,
WALKING, OR ENGAGING
IN OTHER ACTIVITIES THAT REQUIRE
YOUR UNDIVIDED ATTENTION.
• Do not charge this appliance
with any other charger or attempt
to use the Charging Block on any
other product.
• NEVER USE UNAPPROVED POWER
SOURCES OR RAPID CHARGERS.
• To avoid the risk of electrical shock,
fire, or bodily injury, DO NOT charge
or use in wet conditions, or immerse
the Charging Cable, Charging Block,
or Hybrid Motor Base, Blade, and Lid
in water or other liquids.
• Do not operate the unit if there is
damage to the Charging Cable or
Charging Block, if there has been an
appliance malfunction, or if the
Hybrid Motor Base, Blade, and Lid
has been dropped or damaged in any
manner. Contact Customer Service
for assistance at 1 (800) 523-5993.
• Always POWER OFF and UNPLUG the
nutribullet
®
Flip Insulated Portable
Blender when not in use, and BEFORE
assembling, disassembling, changing
accessories, or cleaning.
• Do not charge your device around
flammable materials, on your bed
or couch, or on top of any type
of paper.
• Only charge your device with the
Charging Cable and Charging Block
provided. Using incompatible parts or
aftermarket accessories may damage
your nutribullet
®
Flip Insulated
Portable Blender or create safety
hazards that may cause personal
injury or property damage.
POWER SUPPLY SAFETY:
WARNING! USE ONLY THE
CHARGING CABLE AND CHARGING
BLOCK PROVIDED WITH YOUR
NUTRIBULLET
®
FLIP INSULATED
PORTABLE BLENDER. NEVER USE AN
UNAPPROVED POWER SOURCE OR
RAPID CHARGER ON THIS UNIT.
65
WARNING! FAILURE TO TAKE THE
FOLLOWING PRECAUTIONS CAN
RESULT IN SERIOUS PERSONAL
INJURY, DEATH FROM ELECTRIC
SHOCK OR FIRE, OR DAMAGE TO
YOUR DEVICE.
WARNING! DO NOT USE THE
CHARGING BLOCK WITH A VOLTAGE
CONVERTER DEVICE, ADAPTER, OR
EXTENSION CORD.
• Do not use non-standard power
sources, such as generators or
inverters. Use only AC power
provided by a standard wall outlet
or automobile lighter port.
• Do not use a rapid charger or
higher-wattage charger. Use only
with a standard wall outlet or
automobile lighter port. Never start
your car with the unit plugged into
the automobile lighter port, as this
can potentially cause a power surge
that will short out the unit.
• Do not overload your wall outlet.
Confirm that it is rated to handle
the total current (in amps) drawn
by your device (as indicated on your
Power Supply Unit) and any other
devices using the same circuit.
• Never use a damaged Charging
Block, or one that has been dropped
or received a sharp impact.
• Do not charge in an area of extreme
heat or cold.
• Always unplug the Charging Block
when not in use.
CABLE AND CORD SAFETY:
WARNING! USE ONLY THE
CHARGING CABLE THAT CAME
WITH YOUR NUTRIBULLET
®
FLIP
INSULATED PORTABLE BLENDER
TO CHARGE.
• Inspect your Charging Block and
cables regularly.
• Exposed device cables and cords
pose a potential tripping hazard.
Arrange all cables and cords so that
people and pets are not likely to trip
over or accidentally pull on them as
they move around or walk through
the area.
• Do not wrap or wind the Charging
Cable too tightly when storing. Do
not bend or crease the Charging
Cable when using.
• When positioning your device or
Charging Block, ensure that the
cables are not bent sharply and
that the connectors are not pushed
against a wall or hard surface.
• Do not allow pets or children to bite
or chew on cables and cords.
• Always disconnect the Charging
Block from the outlet by pulling on the
plug portion of the block. Never pull
on the Charging Cable to remove the
Charging Block from the wall.
• Do not let the Charging Cable touch
hot surfaces or any extreme heat
source, or become knotted, tangled,
or frayed.
• Do not grab or carry your device by
the Charging Cable.
• Do not use an extension cord or let
the Charging Cable hang over the
edge of a table or counter.
BATTERY SAFETY:
Your nutribullet
®
Flip Insulated Portable
Blender contains rechargeable
lithium-ion batteries. The batteries are
not replaceable and must be recycled or
disposed of properly. Improper disposal
may result in injury, death, or property
damage due to battery fluid leakage,
fire, overheating, or explosion.
• DO NOT open or attempt to repair or
replace the batteries, doing so may
result in electric shock, damage to the
unit, fire, personal injury, or property
damage.
• Do not recharge your nutribullet
®
Flip
Insulated Portable Blender near a fire
or heat source, or in extremely hot
conditions.
• Do not expose the Hybrid Motor
Base, Blade, and Lid containing
the battery pack to fire or
excessive heat. Exposure to fire or
temperatures above 265°F/130°C
may damage the batteries or cause
a fire or explosion.
• The recommended storage and
ambient charging temperature
range for this device is between
50°F−104°F (10°C−40°C).
• NEVER leave your nutribullet
®
Flip Insulated Portable Blender
inside your vehicle, especially in
the summer or winter. Prolonged
exposure to extreme temperatures
can cause the batteries to leak,
rupture, or explode.
• Do not store your unit in any area
with exposure to excessive heat,
such as a cabinet above the oven or
stove, near a radiator or heater, or in
any area exposed to direct sunlight.
• Do not use your unit in any area with
a potentially explosive atmosphere
(e.g., fueling areas or fuel service
stations, below decks on boats or
other vessels, fuel and/or chemical
transfer and storage facilities, and
areas where flammable chemicals
or particles, such as grain dust or
metal powders have collected in
the air). Static electricity discharge
may ignite combustible or
flammable materials resulting in
a fire or explosion.
• Do not use your unit if the Hybrid
Motor Base, Blade, and Lid is
overheated, has an odor, leaks,
is bulging, or demonstrates any
changes in color/shape, as this may
indicate a leak from the battery cell.
Leaks from battery cells can occur
under extreme conditions. Battery
fluid is corrosive and may be toxic.
It can cause burns and may be
harmful or fatal if swallowed. If any
signs of leakage occur, immediately
discontinue all use of the unit
and contact Customer Service for
assistance at 1 (800) 523-5993.
• Avoid contact with battery fluid. If
a battery leaks, keep the leaked
fluid from touching your skin, eyes,
clothes, or other surfaces. If the
battery fluid contacts your skin,
eyes, or clothes, immediately rinse
the aected area with water and
contact your doctor or other medical
providers as appropriate.
• Dispose of batteries properly. The
batteries contain elements that
may pose health risks to individuals
if they are allowed to leach into
the ground water supply. Disposal
of these batteries with standard
household waste may be illegal
in some countries. Contact your
local recycling or hazardous waste
disposal centers in your area for
proper disposal instructions.
• Do not incinerate the Hybrid Motor
Base, Blade, and Lid. The batteries
can explode.
!
Save these
instructions!
87
Contents.
1 Important safeguards
9 What’s included
9 Before first use
10 Assembly guide
11 LED indicators
13 Using your nutribullet
®
Flip
Insulated Portable Blender
16 Using the To-Go Lid
18 Troubleshooting
20 Care & maintenance
22 Replacement parts
23 nutribullet
®
Flip Insulated Portable
Blender One-Year Limited Warranty
26 Product registration
Thank you for purchasing the nutribullet
®
Flip Insulated Portable Blender.
Assembly Guide
Assembly guide.
carry handle
flip-top lid
one-button
interface
hybrid motor
base, blade,
& lid
USB-C
charging port
20oz stainless
steel insulated
blending cup*
*
109
Remove all packaging materials, stickers, and the like, and clean
your unit with care according to the instructions detailed in the Care
& Maintenance section (pg. 20).
Charge the unit for at least 2 hours using the provided USB-C
Charging Cable and Charging Block.
What’s included.
Before first use.
hybrid motor
base, blade,
& lid
blending cup USB-C
charging cable
& charging block
to-go lidstrawcleaning brush
blade cover
motor base & tumbler lid with blade
Travel Lid
Blending Cup
Metal straw
cleaning brush
USB-C Charging Cable & Charging block
Blade Cover
WARNING! DO NOT exceed the MAX fill capacity. 20oz total Cup
capacity. 16oz MAX fill line capacity.
1211
LED indicators.
The nutribullet
®
Flip Portable Blender’s indicator has six LED light
bars that appear white, yellow, red, or green according to the unit’s
operational status. The meaning of each display is detailed below.
LED Control Panel - Sleep Mode
z
z
LED Control Panel - Sleep Mode
30
sec
LED Control Panel - Blend Mode
LED Control Panel - Wake
NO POWER:
All LEDs o.
CHARGE STATUS:
When plugged in to charge,
the color of LED indicates
charge status.
SOLID GREEN: full charge.
FLASHING GREEN: ready for
normal use.
FLASHING YELLOW: low charge,
can run several cycles.
FLASHING RED: needs charging,
do not use to blend.
Settings.
Charging.
WAKE:
Press the Power button once to
wake up your blender.
The LED ring will illuminate in
a clockwise direction. When
the ring is fullly lit up, the unit is
ready to blend.
WHITE: ready for normal use.
YELLOW: low charge, can run
several cycles.
RED: needs charging, do
not use.
SLEEP MODE:
After 2 minutes of inactivity, your
blender will automatically go
into sleep mode.
When the ring light is o, the
blender is powered o.
BLEND MODE:
Press the Power button to start
a 30-second blend cycle.
White LEDs circulate clockwise
during the blending cycle.
LED light bars
LED Control Panel - Error
ERROR:
Flashing YELLOW lights indicate
a use error. Refer to the
troubleshooting guide on on
page 19 to diagnose the issue.
Flashing RED lights indicate a
functional error. If these occur,
immediately stop use, power
o the blender, and refer to the
troubleshooting guide on
page 19 for details.
1413
Using the nutribullet
®
Flip Insulated
Portable Blender.
1 Place the Blending Cup
on a clean, dry, and
level surface.
2 Twist o the Hybrid Motor
Base, Blade, and Lid and
add ingredients.
NOTE: Make sure you don’t overfill
the Cup. Follow the minimum
liquid and MAX fill marks on the
Cup. When adding ice, it should
not exceed 25% of the Cup’s total
volume. Always add a sucient
amount of liquid ingredients.
Place the blending cup on a clean, dry, and level surface
Twist o the motor base/lid and insert your ingredients
3 Twist the Hybrid Motor
Base, Blade, and Lid
back onto the Blending
Cup. Make sure the
Flip-Top Lid is snapped
closed and sealed.
Twist the motor base back onto the blending cup 2Twist the motor base back onto the blending cup 1
4 With the blender right
side-up (Hybrid Motor Base,
Blade, and Lid on top), press
the Power Button once to
wake up the blender. Wait
about 1 second for the LED
light ring to fully illuminate.
NOTE: The LED light ring will fully
illuminate white if the Hybrid Motor
Base, Blade, and Lid is properly
installed. If the Hybrid Motor Base,
Blade, and Lid is installed incorrectly,
the LED light ring will flash yellow.
Wake up your blender by pressing the power button once
5 When ready, press the
Power Button again to
begin a 30-second
blending cycle.
NOTE: To prevent blade
blockage or stalling, start
the blending cycle with the
blender right-side-up (Hybrid
Motor Base, Blade, and Lid
on top).
When ready, press the power button again to start a xx-second blending cycle
Make sure the drinking spout is snap closed and sealed.
1615
6 Once blending begins, flip
your blender upside-down
(Hybrid Motor Base, Blade,
and Lid on bottom) so the
ingredients make contact
with the blade. Place the
blender on a clean, dry, and
level surface until blending
is complete.
NOTE: If you want to Pulse your
ingredients or stop the blending
cycle early, press the Power Button
during the blending cycle.
Once blending has begun, flip your blender upside-down so the
ingredients make contact with the blade
7 Once blending is complete,
flip your blender so the
Hybrid Motor Base, Blade,
and Lid is right-side-up and
open the Flip-Top Lid to
enjoy your blend.
Once blending is complete, flip your blender right-side-up, and open the flip-top-lid
8 Use the Carry Handle to
take your blend on the go.
WARNING! NEVER open the
Flip-Top Lid or attempt to place
anything into the sip hole
while the motor is running to
prevent injury or damage.
Use the carry handle to take your blend with you
Using the to-go lid.
1 Remove, clean, and
dry the Hybrid Motor
Base, Blade, and Lid.
Cover with the Blade
Cover before storing.
2 Twist on the To-Go Lid.
Cover Motor Base/Lid with the blade cover before storing.
Twist on the To-Go Lid.
Your nutribullet
®
Flip also comes with a twist-on To-Go Lid that you
can swap with the Hybrid Motor Base, Blade, and Lid. The To-Go Lid
oers two ways to enjoy your blend: through a sipping spout at the
front of the Lid, or through the straw opening in the center of your Lid.
1817
3 To open the sipping spout,
unsnap the cover flap from
the front of the To-Go Lid,
then flip it all the way over,
snapping it into place at
the opposite side of the
To-Go Lid.
Once blending is complete, flip your blender right-side-up, and open the flip-top-lid 2
To reveal the opening, keep the sipping spout cover flap closed and slide the
center tab towards the back of the Lid.
4 The nutribullet
®
tab at the
center of the To-Go Lid
covers the straw opening.
To reveal the opening, keep
the sipping spout cover flap
closed and slide the center
tab towards the back of
the To-Go Lid.
NOTE: The To-Go Lid is
not leak-proof and will
not prevent blends from
seeping or spilling out of the
Cup. Be sure to always keep
your Cup upright when
using the To-Go Lid.
Troubleshooting.
WARNING!
Before first use, review all
warnings and caution statements
in the important safeguards section
(pages 1-6).
ALWAYS use caution when opening
the Flip-Top Lid. Open the Flip-Top Lid
Cap slowly, being mindful that the
spraying of contents may occur.
NEVER try to operate your
nutribullet
®
Flip Insulated Portable
Blender while driving or while engaging
in other situations that require your
undivided attention.
NEVER use a rapid charger or a
higher-wattage charger. Use only
the AC power provided.
NEVER use the charger with any
voltage converter device or adapter.
O N LY use the Charging Block and
Charging Cable that came with
your unit.
NEVER start your car with the unit
plugged into the automobile lighter
port, as this can potentially cause a
power surge that will short out the unit.
DON’T leave your nutribullet
®
Flip
Insulated Portable Blender unattended
when in use.
DON’T charge your nutribullet
®
Flip
Insulated Portable Blender if your
USB-C charging port is wet.
NEVER add hot or warm ingredients to
your Blending Cup. Heated ingredients
can cause pressure to build inside the
Cup potentially causing the Flip-Top
Lid to open forcefully, or the Cup and
Hybrid Motor Base, Blade, and Lid to
separate from the Cup. This could
expel hot ingredients and cause
exposure to the blade, potentially
resulting in bodily injury and/or
property damage.
DO NOT blend contents for more than
one minute. Do not run consecutive
blending cycles that exceeds one
minute total. The friction created by
the blending process builds heat inside
the Cup. Consecutive blending cycles
that exceed one minute total may
over-pressurize the Cup, potentially
causing the Flip-Top Lid to open
forcefully, or the Cup and Hybrid Motor
Base, Blade, and Lid to separate from
the Cup. This could expel hot
ingredients and cause exposure to the
blade, potentially resulting in bodily
injury and/or property damage.
Batteries are not replaceable. NEVER
try to open, repair, or attempt to
replace the batteries to your unit.
20
19
FLASHING LED COLOR: YELLOW
TROUBLESHOOTING:
Blending Cup may not be
properly secured to the
Hybrid Motor Base, Blade,
and Lid.
TROUBLESHOOTING:
The Blending Cup has come
loose or been removed from
the Hybrid Motor Base,
Blade, and Lid during the
blending cycle.
TROUBLESHOOTING:
Blades may be blocked.
SOLUTION:
Continue to tighten the Blending
Cup to the Hybrid Motor Base,
Blade, and Lid until the LED light
ring turns white.
SOLUTION:
Carefully dislodge any ingredients
that are stuck in the blade.
Ensure you are using an adequate
amount of liquid, the Cup is not
overfilled, and ingredients all
fall below the MAX fill line.
To prevent blade blockage or
stalling, start the blending cycle
with the Hybrid Motor Base,
Blade, and Lid right-side-up.
(Hybrid Motor Base is on top).
SOLUTION:
Always ensure the Blending
Cup is securely fastened to the
Hybrid Motor Base, Blade, and
Lid before blending. NEVER
try to remove the Cup from the
Hybrid Motor Base before the
cycle is complete.
FLASHING LED COLOR: RED
TROUBLESHOOTING:
Overheat and automatic
lockout.
SOLUTION:
Immediately discontinue
use and allow the blender to
cool down. If the blender remains
locked after 10 minutes of cooling
off, contact Customer Service.
Care & maintenance.
When cleaning the nutribullet
®
Flip Insulated Portable Blender,
always unplug and power off the unit, making sure the blades are
completely stopped before assembling or disassembling.
WARNING! NEVER submerge or rinse the entire Hybrid Motor Base,
Blade, and Lid in water or any other liquid, and be sure to keep water
and other liquids away from the USB-C port.
You may use a blending cycle to quickly clean your blender.
Cleaning.
AUTOMATIC CLEANING:
1 Rinse out the Blending
Cup with fresh water. Add
a drop of dish soap to the
Blending Cup and fill
halfway with water.
NOTE: For stubborn residue, allow
the soap and water to sit for a
few minutes on each end of the
Blending Cup before running the
cleaning cycle.
2 Start a blending cycle, and
flip and shake the blender
to agitate the water during
the cycle.
Add cold water
Flip the blender and shake during the cycle
2221
CLEANING BY HAND:
HYBRID MOTOR BASE,
BLADE, AND LID:
When hand-cleaning, always be
mindful not to rinse/submerge
the entire Hybrid Motor Base,
Blade, and Lid in water, and
take care to prevent water from
entering the USB-C port.
• Blade: point downward at
an angle and carefully clean
and rinse only the blade area
of the Hybrid Motor Base,
Blade, and Lid, keeping your
thumb or finger over the
USB-C port.
• Drinking Spout: with the
blade facing up, carefully
rinse out the sip hole under
a gentle flow of warm water,
keeping your thumb or finger
over the USB-C port.
Use the included Cleaning
Brush to help clean the straw,
under the blades, sip hole, and
vent hole.
To dry, gently wipe and dry the
Hybrid Motor Base, Blade, and
Lid and the USB-C port with
a clean cloth. Rest the Hybrid
Motor Base upright with the
Flip-Top Lid open. Make sure
the USB-C port is completely
dry before charging.
WARNING! DO NOT submerge
or rinse the entire Hybrid
Motor Base, Blade, and Lid in
water or any other liquid.
Always keep your nutribullet
®
Flip Insulated Portable
Blender in a dry, temperature-
controlled location. Always
store the Hybrid Motor Base,
Blade, and Lid with the Cup
or Blade Cover attached, so
the blades are covered and
not exposed. Do not stack any
objects on top of the unit
while storing.
The Blending Cup and To-Go
Lid are the only components of
the nutribullet
®
Flip Insulated
Portable Blender that are
dishwasher-safe, in the top rack
only. To clean the blade and sip
hole, follow the Hand Cleaning
instructions above.
WARNING! DO NOT
place your Hybrid Motor
Base, Blade, and Lid in
the dishwasher.
Storage.
DISHWASHER:
For replacement
parts.
Visit nutribullet.com/shop/
accessories or call Customer
Service at 1 (800) 523-5993.
3 After the cycle ends, open
the Flip-Top Lid that covers
the sip hole and empty the
contents. Repeat the cycle
once more, using only fresh
water for the final rinse.
Do not add soap.
4 Dry the Hybrid Motor Base,
Blade, and Lid upright with
the Flip-Top Lid open.
NOTE: Make sure and pat the
USB-C port dry before you
begin charging.
motor base & tumbler lid with blade
Once blending is complete, flip your blender right-side-up, and open the flip-top-lid 2
BLENDING CUP:
Wash with soap and water.
2423
Form and we will be glad to
help you. When you contact our
Customer Service department,
you will be asked for your
name, address, telephone
number, and proof of original
purchase that includes a
description of the product(s),
purchase date or date of
delivery, and the appropriate.
nutribullet
®
serial number(s).
Before you send your product
for limited warranty service,
please make sure to keep a
copy of all relevant documents
for your files (receipt, etc.). It
is always recommended to
purchase product insurance
and tracking services when
sending your product out for
service. Remember, shipping
and processing fees will
be incurred and are not
covered by the One-Year
Limited Warranty.
EXCLUSIONS & LIMITATIONS
This nutribullet
®
One-Year
Limited Warranty applies only to
nutribullet
®
products distributed
by or for nutribullet
®
that can
be identified by the “nutribullet”
trademark, trade name, logo
and bar code. nutribullet’s
One-Year Limited Warranty
does not apply to any other
products that may appear to
be authentic, but were
not distributed/sold by
nutribullet, LLC.
Normal wear and tear is not
covered by this limited warranty.
This limited warranty applies
to consumer use only, and
is void when the product
is used in a commercial or
institutional setting.
This limited warranty
extends only to the original
consumer purchaser and is
not transferable. In addition,
proof of purchase must
be demonstrated.
Repair or replacement of
the product (or, if repair or
replacement is not feasible, a
refund of the purchase price)
is the exclusive remedy of the
consumer under this limited
warranty. nutribullet, LLC shall
not be liable for any incidental
or consequential damages for
breach of this limited warranty
or any implied warranty on
this product.
This limited warranty gives
you specific legal rights. You
may also have other rights
which vary from state to state.
nutribullet
®
is not liable for
any damage to products not
covered by this warranty (e.g.,
cups, book, User Guide).
This limited warranty does not
apply: (a) to damage caused
by accident, abuse, misuse,
or misapplication; (b) to
damage caused by improper
maintenance (including
unauthorized parts service);
nutribullet
®
Flip
Insulated Portable
Blender One-Year
Limited Waranty.
LIMITED WARRANTY
FOR NUTRIBULLET
®
nutribullet's limited warranty
obligations are confined to the
terms set forth below:
nutribullet, LLC (“nutribullet”)
warrants this nutribullet
®
against defects in materials
and workmanship for a period
of one year from the date of
original retail purchase or
date of delivery of the product.
This limited warranty is valid
only in the country in which
the product is purchased
and comes with the product
at no extra charge, however
shipping and processing fees
will be incurred for returns,
replacements, and/or refunds.
If a defect exists, and this
limited warranty is valid, at its
option, nutribullet
®
will (1) repair
the product at no charge, using
new or refurbished replacement
parts, (2) exchange the product
with a product that is new or
that has been manufactured
from new or serviceable
used parts, and is at least
functionally equivalent to
the original product, or (3)
refund the purchase price of
the product. A replacement
product assumes the remaining
warranty of the original
product. A repaired product has
a one-year warranty from the
original retail purchase date, or
date of delivery of the product.
When a product or part is
exchanged, any replacement
item becomes your property
and the replaced item becomes
nutribullet’s property. When a
refund is given, your product
becomes nutribullet’s property.
OBTAINING WARRANTY
SERVICE
For limited warranty service,
simply call our Customer
Service department at
1 (800) 523-5993 or contact us
via email from our website at
nutribullet.com. Simply click
the contact us link, fill out and
submit the Customer Contact
2625
Locate the serial number under the
nutribullet
®
tab on the Flip-Top Lid
of your nutribullet
®
Flip Insulated
Portable Blender. If you cannot find the
serial number, call Customer Service
for assistance.
Visit nutribullet.com/register or
call 1 (800) 523-5993 to register
your new nutribullet
®
Flip
Insulated Portable Blender. You
will be asked to enter the Serial
Number* of your product,
along with the purchase date
and place of purchase. The
information you submit is for
product registration. Failure to
complete product registration
does not diminish your
warranty rights.
The registration will enable us
to contact you in the unlikely
event of a product safety
notification. By registering your
product, you acknowledge that
you have read and understood
the instructions for use, and
warnings set forth in the
accompanying instructions.
Product registration.
*
(c) to a product or a part that
has been modified in any way;
(d) if any nutribullet
®
serial
number or trademark has been
removed or defaced; and/or (e)
if the product has been used
with an adapter/converter.
THIS LIMITED WARRANTY
AND THE REMEDIES SET
FORTH ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER
WARRANTIES, REMEDIES, AND
CONDITIONS, WHETHER ORAL
OR WRITTEN, EXPRESSED
OR IMPLIED. NUTRIBULLET
®
SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT
LIMITATION, WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE. IF NUTRIBULLET
®
CANNOT LAWFULLY DISCLAIM
IMPLIED WARRANTIES UNDER
THIS LIMITED WARRANTY,
ALL SUCH WARRANTIES,
INCLUDING WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN
DURATION TO THE DURATION
OF THIS LIMITED WARRANTY.
No nutribullet
®
reseller, agent, or
employee is authorized to make
any modification to this warranty.
NUTRIBULLET
®
IS NOT
RESPONSIBLE FOR DIRECT,
SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES
RESULTING FROM ANY
BREACH OF WARRANTY
OR CONDITION, OR UNDER
ANY OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED
TO LOST PROFITS, DOWNTIME,
GOODWILL, OR DAMAGE
TO REPLACEMENT OF
EQUIPMENT AND PROPERTY.
NUTRIBULLET
®
SPECIFICALLY
DOES NOT REPRESENT THAT
IT WILL BE ABLE TO REPAIR
ANY PRODUCT UNDER THIS
LIMITED WARRANTY.
Some states and provinces
do not allow the exclusion
or limitation of incidental or
consequential damages or
exclusions or limitations on the
duration of implied warranties
or conditions, so the above
limitations or exclusions may
not apply to you. This warranty
gives you specific legal rights,
and you may also have other
rights that vary by state
or province.
Capital Brands Distribution, LLC | nutribullet.com | All rights reserved.
nutribullet
®
and the nutribullet
®
logo are trademarks of CapBran Holdings, LLC
registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving
to improve our products, therefore the specifications contained herein are
subject to change without notice.
NBPBxx350_240411
