YMY-030570
User Manual
The TPMS Inspection Tool is manufactured by the grantee TireCheck GmbH.
The TPMS Inspection Tool is sold as OEM and Aftermarket product.
In the case of an Aftermarket business, TireCheck ensures to print the FCC manual statement on
the packaging and/or separate printed manual that comes with the product to notify the end-user
of the commercial product.
In the case of an OEM business, TireCheck ensures to supply the FCC manual statement to the OEM
/ Reseller of the product dictating what must be included in the end-user’s manual for the
commercial product.
The text below must be included in the end product user’s manual to ensure continued FCC and
Industry Canada regulatory compliance. The ID numbers must be included in the manual if the
device label is not readily accessible to the end user. The compliance paragraphs below must be
included in the user’s manual.
FCC
Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Specific Absorption Rate (SAR) information:
This Communicator meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health. FCC RF Exposure
Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over
one gram of tissue.
Device types: Communicator has also been tested against this SAR limit. This
device was tested for typical body-worn operations with the back of the
Communicator kept 0mm from the body. To maintain compliance with FCC RF
exposure requirements, use accessories that maintain an 0mm separation
distance between the user's body and the back of the Communicator. The use of
belt clips, holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and
should be avoided.
Safety
Instructions
CAUTION: Failure to observe the safety instructions can result in fire, electric
shock and other injuries or damage to the device or other property.
Safety instructions:
• Do not pierce, break, crush or cut the device or the battery!
• Do not expose the device or the battery to an open flame or extremely high
temperatures!
• Do not expose the device or the battery to extremely low air pressure!
• Do not drop the device or the battery from a height of more than 1 meter!
• Do not try to change or charge the battery in the device!
• The device or the battery must be recycled or disposed of separately from
household waste!
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Specific Absorption Rate (SAR) information:
This Communicator meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all
persons regardless of age or health. FCC RF Exposure Information and Statement
the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device
types: Communicator has also been tested against this SAR limit. This device
was tested for typical body-worn operations with the back of the Communicator kept 0mm
from the body. To maintain compliance with FCC RF exposure requirements, use
accessories that maintain an 0mm separation distance between the user's body and
the back of the Communicator. The use of belt clips, holsters and similar accessories should
not contain metallic components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC RF exposure requirements, and
should be avoided.
ISED Statement
English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS
exemptés de licence d'Innovation, Sciences et Développement économique Canada.
L'exploitation est soumise aux deux conditions suivantes :
(1) Cet appareil ne doit pas provoquer d'interférences.
(2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un
fonctionnement indésirable de l'appareil.
l'appareil numérique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b).
This device meets the exemption from the routine evaluation limits in section 6.3 of RSS 102 and compliance
with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 6.3 du cnr - 102 et
conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur
l'exposition aux champs rf et la conformité.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un
environnement non contrôlé.
Specific Absorption Rate (SAR) information:
This Communicator meets the government's requirements for exposure to radio waves. The guidelines are
based on standards that were developed by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of
all persons regardless of age or health. ISED RF Exposure Information and Statement the SAR limit of
Canada(ISED) is 1.6 W/kg averaged over one gram of tissue. Device types: Communicator has also been tested
against this SAR limit. This device was tested for typical body-worn operations with the back of the Communicator
kept 0mm from the body. To maintain compliance with ISED RF exposure requirements, use accessories that
maintain an 0mm separation distance between the user's body and the back of the Communicator . The use of
belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with ISED RF exposure requirements, and
should be avoided.
Informations sur le débit d'absorption spécifique (DAS):
Cette Communicator te répond aux exigences du gouvernement en matière d'exposition aux ondes radio. Les
lignes directrices sont basées sur des normes élaborées par des organisations scientifiques indépendantes à
travers une évaluation périodique et approfondie des études scientifiques. Les normes comprennent une marge
de sécurité substantielle conçue pour assurer la sécurité de toutes les personnes, quel que soit leur âge ou leur
état de santé. Information et déclaration d'ISDE sur l'exposition aux RF la limite DAS du Canada (ISDE) est de
1,6 W / kg en moyenne sur un gramme de tissu. Types d'appareils: la Communicator te a également été testée
par rapport à cette limite SAR. Cet appareil a été testé pour des opérations typiques portées sur le corps avec le
dos de la Communicator te gardé à 0 mm du corps. Pour maintenir la conformité avec les exigences d'exposition
RF d'ISDE, utilisez des accessoires qui maintiennent une distance de séparation de 0 mm entre le corps de
l'utilisateur et l'arrière de la Communicator te. L'utilisation de clips de ceinture, d'étuis et d'accessoires similaires
ne doit pas contenir de composants métalliques dans son assemblage. L'utilisation d'accessoires qui ne satisfont
pas à ces exigences peut ne pas être conforme aux exigences d'exposition aux RF d'ISDE et doit être évitée.
