25W MAGNETIC WIRELESS CHARGER
User Manual
Preface
Thank you very much for purchasing this 25W wireless charger. This product is
designed according to the Qi2.2 standard and is suitable for wireless charging of iPhone
16/17 series phones [maximum 25W]. For other models of phones, the output power
during wireless charging is 5~15W. It features a retractable cable design for easy
portability and storage.
Note: Please use it with the PD charger included in the package, or use a charger with
the PPS 3.3~21V 1.5A charging protocol [single-port output power exceeding 30W]. Do
not use other types of chargers to power this wireless charger.
Product Parameters
Model: iw51
Product Name: 25W Magnetic Wireless Charger
Input: PPS 3.3~21V/1.5A, 30W or more
Output: 5W/7.5W/10W/15W/25W
Retractable Cable Length: 0.7 meters
Compatibility: Supports wireless charging devices that comply with the Qi standard.
Package Contents
25W Magnetic Wireless Charger X 1
30W Dedicated Charger X 1
User Manual X 1
Important Notes:
1.
The package includes a 33W charger, which has the PPS 3.3~21V 1.5A charging
protocol.
2.
If using other PD chargers to power this wireless charger, they must have the PPS
3.3~21V 1.5A charging protocol, and the output power must not be lower than 30W;
otherwise, the wireless charger may not work.
Caution:
This device complies with part 15 of the FCC Rules. Operation issubject to the
following two conditions:
(1) This device may not cause harmful interference,and
(2)This device must accept any interference received,including interference that may
cause undesired operation.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm
between the radiator and your body, and fully supported by the operating and installation
configurations of the transmitter and its antenna(s).
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm
between the radiator and your body, and fully supported by the operating and installation
configurations of the transmitter and its antenna(s).
