User Guide for V90
True Wireless Stereo Earphones
English
Deutsch
Français
Italiano
Español
��-��
��-��
��-��
��-��
��-��
�� EN
�� EN
Table of Product Contents
Charging Case*� Type-C Charging Cable*�Wireless Earbud*�
Instruction Book
Product Specification
Bluetooth Version:
Support:
Charging Port:
�.�
HFP/A�DP/HSP/AVRCP
Type-C
Battery life：
Charging time：
Transmission range：
� hours of use per full charge of both earbuds
(actual battery life varies with song type and volume requirements)
�.� hours for earbuds / �.� hours for charging case
�� meters (without obstacles)
Earbud Tip*�
�� EN
Type-C Charging port
Battery Status Indicator of
Charging Case
Introduction
Bluetooth Version:
Support:
Charging Port:
�.�
HFP/A�DP/HSP/AVRCP
Type-C
Battery life：
Charging time：
Transmission range：
� hours of use per full charge of both earbuds
(actual battery life varies with song type and volume requirements)
�.� hours for earbuds / �.� hours for charging case
�� meters (without obstacles)
LED
MIC
LED Indicator Light
MFB Button
Charging Contact
LED Bar for Earbuds
�� EN
· Please make sure both the earbuds and the charging case are fully charged before first use.
· Step �
Take both earbuds out of the charging case and both earbuds will power on and
start pairing automatically.[If the earbuds are not connected to your device for
more than � minutes, the earbuds will automatically turn off. Press the MFB button
for about � seconds to manually turn on the earbuds when prompted "Power on".
One earbud will flash a white light, while the other earbud will flash a white light
every three seconds, indicating that the wireless earphones have completed
pairing.
· Step �
Enable the Bluetooth pairing mode on your phone device, search and select "V��" to
connect. (You should hear a voice prompt "Connected" when wearing earbuds).
· If indicator light of earbud is off,it means the phone is connected
· Automatic connection
By default, the earbuds will connect the last paired phone automatically when power on.
· Prompt
�. If you have any problem pairing the two earbuds with your phone, put the earbuds
back in the charging case and repeat the above steps.
�. These earbuds can be used not only together, but also individually
If you want to use single earbud, just take one earbud out of the case and connect it
to your phone. or when using two earbuds, manually turn off one earbud or put
one back in the charging case and you'll be able to use the other one earbud alone.
How do I pair two headphones with my phone?
i
ConnectedV90
Bluetooth
Bluetooth
00:00
5G
Settings
OTHER DEVICES
MY DEVICES
Now discoverable as “IPhone”.
To pair an Apple Watch with your iPhone, go
to the Apple Watch app
�� EN
· Please make sure both the earbuds and the charging case are fully charged before first use.
· Step �
Take both earbuds out of the charging case and both earbuds will power on and
start pairing automatically.[If the earbuds are not connected to your device for
more than � minutes, the earbuds will automatically turn off. Press the MFB button
for about � seconds to manually turn on the earbuds when prompted "Power on".
One earbud will flash a white light, while the other earbud will flash a white light
every three seconds, indicating that the wireless earphones have completed
pairing.
· Step �
Enable the Bluetooth pairing mode on your phone device, search and select "V��" to
connect. (You should hear a voice prompt "Connected" when wearing earbuds).
· If indicator light of earbud is off,it means the phone is connected
· Automatic connection
By default, the earbuds will connect the last paired phone automatically when power on.
· Prompt
�. If you have any problem pairing the two earbuds with your phone, put the earbuds
back in the charging case and repeat the above steps.
�. These earbuds can be used not only together, but also individually
If you want to use single earbud, just take one earbud out of the case and connect it
to your phone. or when using two earbuds, manually turn off one earbud or put
one back in the charging case and you'll be able to use the other one earbud alone.
Functions
Answer call:
Hang up:
Refuse incoming call:
Telephone Communication
tap once
press and hold the key for �s
press and hold the key for �s
Play/pause
Previous track
Next track
Activate Siri
Turn down volume
Turn up volume
For Music
tap twice
press and hold "L" for �s
press and hold "R" for �s
quickly tap for three times
single tap on left earbud
single tap on right earbud
�� EN
· Earbuds Charging
The earbuds will only be charged when you place them in the charging slots
correctly.(You can charge the charging case and the earbuds at the same time, or
you can charge the charging case first and then the earbuds.
The indicator light will show white when charging.
The charging case will stop charging automatically and the indicator light on
earbuds will go out when fully charged.
When the earbuds are charging in the charging case, the digital display bar of the
case will keep blink and turns off when the earphones are fully charged.
· Case Charging
There is a Type-C usb charging cable in the package, please use it to charge the case
directly. During charging, the digital display will flash and display the battery level
in real time. When fully charged, the number shows ���.
Charging
Earbuds Charging Case Charging
�� EN
After using it for a long period of time, due to the oxidation of the magnet connector,
the earbuds might not be charged or even turned on.
You can fix this problem by cleaning the magnet connectors on the earbuds and
charging case with an alcohol wipe
Put the earbuds in the charging case, the earbuds will turn off immediately and the
charging case will start to charging automatically.
The earbuds will connect the last paired phone automatically.
Charging Alerts
If the earbuds have not been used for more than � months, we recommend that you
charge it.
Please use an charger approved by FCC (Federal Communications Commission).
Do not dissemble the earbuds.
Children aged �� and under require adult supervision.
Do not expose the earbuds to high or low temperatures, and do not use the earbuds
during a thunderstorm.
Avoid free fall or violent shock to the device. Keep the device away from sources of fire
and do not place the device in water.
Storage and Maintenance
�� EN
Frequently Asked Questions
Permanent replacement of damaged, defective item or missing components. Please activate
via email below within �� days. aseller���@gmail.com
Activation & Warranty
Q : Why don't these earbuds pair with my phone?
A : Make sure the earbuds are fully charged and powered on.
Make sure your phone's Bluetooth is enabled
If there is no problem with the two points stated above, turn off the powered-on
earbuds after � continuous and quick clicks.
Put them back into the charging case and close the lip, wait for � minute, then open
the charging case and reconnect the earbuds to the phone.
Q : Why does the music cut in or out?
A : First, keep the earbuds no more than ��m away from your phone (no obstacles).
If the distance is less than ��m, follow these steps:
�. Put the earbuds back into the case and close the lid, manually click "forget the
V��" on your phone
�. After �� seconds, open the charging case and reconnect these earbuds with your phone
Q : Why the earbuds still won't be charged or disconnect from the phone after I put them
in the case and close the lid?
A : Make sure the charging case is not in a low battery state.
If the charging case is in a low battery state, the earbuds will neither be charged nor
disconnected.
In this case, please use a type-c charging cable to fully charge the case.
Q : Are these earbuds sweat- and water-resistant?
A : These earbuds are sweatproof and IPX� waterproof. For electronics, we do not
recommend submerging the earbuds in water. The earphones are not resistant to hot
water, and water vapor will enter the earphones and damage the components.
For more detailed product FAQs, please contact our customer service.
