HYDROBOOST 3200 TOTALCLEAN
Hidrolimpiadora / Pressure washer
Manual de instrucciones
Instruction manual
Manuel d’instructions
Bedienungsanleitung
Manuale di istruzioni
Manual de instruções
Handleiding
Instrukcja obsługi
Návod k použití
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 108140_HydroBoost 3200 TotalClean_IM_012221116.indd 1 18/11/22 9:2318/11/22 9:23
11
HYDROBOOST 3200 TOTALCLEAN
SAFETY INSTRUCTIONS
- This symbol means: CAUTION: read the instruction
manual before using the appliance.
- Before using the appliance, read the
following instructions carefully. Keep this
instruction manual for future reference or new users.
- Check the power cord regularly for visible damage. Should
the cord be damaged or the appliance not work properly, it
must be repaired by the ocial Technical Support Service of
Cecotec to avoid any type of danger.
- The appliance should not be used by children. Children
must be supervised to make sure they do not play with the
appliance.
- This appliance can be used by persons with reduced physical,
sensory, or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning the use of the appliance in a safe way and
understand the hazards involved.
- High-pressure cleaning devices should not be used by
children or untrained personnel.
- This symbol means that high-pressure
jets can be dangerous if misused. The
jet must not be directed at people,
animals, live electrical equipment, or
the appliance itself.
- This symbol means that this device is not suitable
to be connected to drinking-water sources.
- The mains connection must be carried out
by a qualied electrician and comply with IEC
60364-1. It is recommended for the power supply
of the appliance to include either a dierential device cutting
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 1108140_HydroBoost 3200 TotalClean_IM_012221116.indd 11 18/11/22 9:2318/11/22 9:23
12
HYDROBOOST 3200 TOTALCLEAN
o power in case the ground leakage current exceeds 30 mA
in 30 ms, or a device controlling the circuit to ground.
- WARNING: this symbol means that high-pressure water
jets can be dangerous if misused. The water jet must not be
directed at people, live electrical equipment, or the appliance
itself.
- WARNING: do not use the appliance within the reach of
persons unless they are wearing protective clothing.
- WARNING: do not direct the water jet at yourself or others to
clean clothes or footwear.
- WARNING: risk of explosion. Do not spray ammable liquids.
- WARNING: high-pressure cleaning devices should not be
used by children or untrained personnel.
- WARNING: couplings, fastenings, and high-pressure hoses
are important for the safety of the appliance. Use only hoses,
fastenings, and couplings recommended by Cecotec.
- WARNING: to ensure the safety of the appliance, use only
spare parts approved or manufactured by Cecotec.
- WARNING: water that has owed through backow
prevention devices is non-drinkable.
- WARNING: the appliance must be unplugged during cleaning
or maintenance and when replacing parts.
- WARNING: do not use the appliance if the power cord or
important parts of the appliance are damaged, e.g., safety
devices, high-pressure hoses, trigger gun, etc.
- WARNING: unsuitable extension cords can be dangerous. If
an extension cord is used, it must be suitable for outdoor
use, and the connection must be kept dry and o the ground.
It is recommended to use a cord reel to keep the base at least
60 mm above the ground.
- WARNING: always turn o the power disconnect switch
when leaving the appliance unattended.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 1208140_HydroBoost 3200 TotalClean_IM_012221116.indd 12 18/11/22 9:2318/11/22 9:23
13
HYDROBOOST 3200 TOTALCLEAN
- Ensure that the mains voltage matches the voltage specied
on the product rating label and that the plug is earthed.
- Always unplug the power supply before disassembling or
repairing the device.
- Make sure that the safety devices are working properly
before using the device. Do not remove or modify any parts
of the trigger gun or the product itself.
- It is very important to know how to stop the appliance and
release the pressure quickly before using it, and to become
thoroughly familiar with its operation.
- Stay alert to what you are doing during operation.
- Do not operate the machine when fatigued or under the
inuence of alcohol or drugs.
- Do not use the device if its cord or any of its parts are
damaged, e.g., the safety elements, the high-pressure hose,
or the trigger of the gun.
- Make sure there are no persons in the area where the device
is to be used.
- Do not tilt your body to reach the product or stand on an
unstable support. Always keep good balance.
- Follow the maintenance instructions specied in this
manual.
- Make sure the product is placed on a stable surface during
operation, transport, assembly, or disassembly. Be careful
when moving it from one place to another to avoid damaging
it.
- In the event of an accident, switch o the appliance and
disconnect it from the mains immediately.
- Keep the nozzle of the device clear.
- Always wear safety goggles and protective clothing when
using or repairing the product. The use of hearing protection
is also recommended.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 1308140_HydroBoost 3200 TotalClean_IM_012221116.indd 13 18/11/22 9:2318/11/22 9:23
14
HYDROBOOST 3200 TOTALCLEAN
- Never place your hands or ngers in the water jet while the
product is in operation.
- Do not attempt to block or redirect water leaks with any part
of the body.
- Always activate the lock system, even when stopping for a
moment.
- Risk of explosion. Never spray ammable liquids or use the
pressure washer in areas where combustible dust, liquid, or
vapours may be present. Do not use the machine in enclosed
buildings or near explosive atmospheres.
- Do not spray electrical and electronic appliances or cables.
- Do not remove the high-pressure hose from the machine
while the system is being pressurised. To depressurise the
device, turn it o, stop the water supply, and then press the
trigger 2 or 3 times.
- Do not activate the trigger lock system when the appliance
is in operation.
- Do not operate the appliance unless all parts are properly
connected to the main body (handle, trigger gun, nozzle,
etc.).
- Make sure to turn on the water supply before turning on
the pressure washer. Running the pump without water can
cause serious damage to the pump.
- Do not use the pressure washer if any parts are missing or
damaged. Check the condition of the product regularly and
repair or replace damaged or worn parts immediately.
- Use only the nozzle included with the product.
- Do not leave the high-pressure hose unattended while the
device is in operation.
- Hold the high-pressure hose and trigger gun rmly when
switching on and while using the machine.
- Do not leave the appliance running with the trigger released
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 1408140_HydroBoost 3200 TotalClean_IM_012221116.indd 14 18/11/22 9:2318/11/22 9:23
15
HYDROBOOST 3200 TOTALCLEAN
for more than one minute, as this could damage the pump.
- This device is not designed to pump hot water. Do not connect
the appliance to a hot-water supply, as this will signicantly
reduce the shelf life of the pump.
- Make sure the water inlet pressure is between 0.01 MPa and
0.4 MPa and that the inlet hose is at least 5 metres long.
- If the device is to be connected to a drinking-water supply,
install a disconnector on the water pipe to prevent dirty
water from backing up and entering the drinking-water
system. The disconnector must comply with EN 60335-2-79
ANNEX A.
- This device must not be controlled by external switching
elements such as timers or connected to electrical circuits
that are continuously switched on and o.
- Release the trigger when switching from high to low
pressure.
- Keep the high-pressure hose away from sharp objects. The
burst of a high-pressure hose could cause injury. Inspect the
high-pressure hose regularly and replace it if necessary. Do
not try to x a damaged high-pressure hose.
- Keep all connections dry and o the ground to avoid risk of
electric shock. Do not touch the plug with wet hands.
- Do not use a pressure higher than the one permitted by
the parts of the pressurisation system (high-pressure
hose, connections, etc.). Make sure every component and
accessory is rated to withstand the maximum operating
pressure of the unit.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 1508140_HydroBoost 3200 TotalClean_IM_012221116.indd 15 18/11/22 9:2318/11/22 9:23
16
HYDROBOOST 3200 TOTALCLEAN
Repairing double-insulated devices
- A double-insulated device is equipped with two insulation
systems instead of an earth connection. No earth-connection
means are provided for double-insulated devices, nor
should they be added to the product. The repair of a double-
insulated appliance requires extreme care and knowledge
of the system and should only be carried out by qualied
personnel.
- Spare parts for a double-insulated product must be identical
to the original parts. A double-insulated device is marked
with the words "Double Insulation", "Double Insulated", or
this icon .
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 1608140_HydroBoost 3200 TotalClean_IM_012221116.indd 16 18/11/22 9:2318/11/22 9:23
HYDROBOOST 3200 TOTALCLEAN
71
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Main body
2. Hose*
3. Water supply*
4. Water inlet
5. High-pressure hose
6. Water outlet
7. Trigger gun
8. Power socket*
9. Soap bottle
10. Anti-impurities lter
11. 3DTurboFlip nozzle
12. 360Brush (special for wheel rims)
13. EasyClean brush (special for gaskets)
14. Hose reel
15. 2-Spin brush
16. UltraJet nozzles
*Parts 2, 3, and 8 not included
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If any of them
are missing or not in good condition, please contact Cecotec's ocial Technical Support
Service immediately.
Box contents
- Hydroboost 3200 TotalClean pressure washer
- High-pressure hose
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 7108140_HydroBoost 3200 TotalClean_IM_012221116.indd 71 18/11/22 9:2318/11/22 9:23
HYDROBOOST 3200 TOTALCLEAN
72
ENGLISH
- 4 UltraJet nozzle tips (0-40º)
- 3DTurboFlip nozzle
- 360Brush (special for wheel rims)
- EasyClean brush (special for gaskets)
- Soap bottle
- Trigger gun
- Lance
- Anti-impurities lter
- Nozzle-cleaning needle
- 2-Spin brush
- Instruction manual
3. PRODUCT ASSEMBLY
- Fit the high-pressure hose (5) to the pressurised water outlet of the pressure washer (6).
- Attach the trigger gun (7) to the high-pressure hose (5). Before turning on the machine,
make sure the high-pressure hose (5) is completely unwound. The hose (5) should not
become entangled while in use.
- Install the spray nozzle or the item to be used.
- Check the anti-impurities lter (10) is not blocked.
- Connect the pressure washer to the power supply (8) and water supply (3).
Note
It is very important to let air out of the trigger gun before using the pressure washer. Press
the trigger to let all the trapped air out of the unit and the high-pressure hose. Hold down the
trigger until a continuous water jet comes out of the nozzle. This process may take 2 minutes.
4. OPERATION
Note
Beware of the recoil caused by the force of the water when activating the pressure washer.
Pay special attention when cleaning surfaces susceptible to damage, such as vehicle bodywork
or rims, lacquered surfaces, wood, paintwork, etc.
Product performance
Note
The motor of this pressure washer does not run continuously. It only runs when pressing the
trigger. Once the initial procedures in this manual have been carried out, turn the pressure
washer on and press the trigger to activate the pressure washer.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 7208140_HydroBoost 3200 TotalClean_IM_012221116.indd 72 18/11/22 9:2318/11/22 9:23
HYDROBOOST 3200 TOTALCLEAN
73
ENGLISH
High-pressure hose angle based on surface
When spraying water against a surface, the jet achieves maximum impact when sprayed
head-on. However, this type of impact tends to embed dirt particles into the surface, creating
the opposite cleaning eect to the one desired. Therefore, the optimum angle for spraying
water against a surface is 45°. Spraying water at this angle improves the impact and allows for
a more ecient removal of dirt. Fig. 2
Distance from the surface to be cleaned
Another factor that determines the impact force of the water is the distance from the surface
to be cleaned. Water impact and force increases as the spray nozzle approaches the surface.
How to avoid damaging surfaces
A surface is damaged when the water impact force is greater than the hardness of the surface.
The impact force will vary according to the settings mentioned above. Never use a direct jet
on surfaces susceptible to damage. Avoid spraying windows with the direct jet, as they may
break.
The best way to avoid damaging surfaces is to follow these steps:
1. Follow the distance and angle instructions mentioned above.
2. Vary the angle of the jet, the type of jet, and the distance from the surface to be cleaned
until ecient cleaning is achieved without damaging the surface.
Nozzles
The Hydroboost 3200 TotalClean includes 4 UltraJet nozzles and a 3D TurboFlip nozzle. These
are colour-coded and produce dierent types of jets and dierent pressures to perform a
specic cleaning task. The nozzle size determines the jet size and water pressure. Fig. 3
- Nozzle 0°, Red: sprays water and is extremely powerful. Covers small cleaning areas. It is
used to clean surfaces that can stand high pressures, like metal or cement. Do not use this
nozzle to clean wood.
- Nozzle 15°, Yellow : emits powerful jets at 15°, for intensive cleaning in small areas. Use this
nozzle only in surfaces and materials that stand high pressures.
- Nozzle 25°, Green emits powerful jets at 25°, for intensive cleaning in large areas. Use this
nozzle in surfaces and materials that stand a medium pressure.
- Nozzle 40°, White: emits water jets at 40° and less powerful. Covers greater areas and can
be used to carry out general cleaning tasks.
- Turbo nozzle: use this nozzle to clean in a turbo mode. Water is distributed in a spiral-
shaped jet. The 3D TurboFlip nozzle combines the power of a direct jet of great impact with
the eciency of a 25º jet. This transforms the concentrated jet into a conical jet that deep
cleans larger areas.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 7308140_HydroBoost 3200 TotalClean_IM_012221116.indd 73 18/11/22 9:2318/11/22 9:23
HYDROBOOST 3200 TOTALCLEAN
74
ENGLISH
Trigger locking system
It is very important to hold the gun in the correct position when using the pressure washer, with
a hand in the handle and the other in the wand. When stopping the machine, it is necessary to
use the gun locking system to prevent accidents. Fig. 4
Attachments
3D TurboFlip nozzle
The 3D TurboFlip nozzle, also dened as a rotating nozzle, is a very eective accessory to
signicantly reduce cleaning time. This accessory is attached to the lance.
Soap bottle
- This model includes an accessory to apply soap while in operation. The use of soaps may
reduce the cleaning time and make dirt removal easier. Some soaps have been designed
for use in pressure washers and specic cleaning tasks. The use of thick soaps, like the
soap used with tableware, can clog the injection system with chemical products.
- In vertical surfaces, apply soap from bottom to top. This will prevent soap from dripping
down and creating stains. High-pressure rinses can also be carried out from bottom to
top. With stains especially dicult to remove you may need to use a brush along with soap
and high-pressure rinses. Follow the instructions in the next section to use this accessory.
Fig. 5
Anti-impurities lter
This model includes a transparent male connector with a lter that can be assembled with
the hose to prevent the dust from getting through. This accessory is inserted into the water
outlet (6).
360Brush special for wheel rims
This model includes a specic brush for car rims made of bristles, which can remove the
harshest dirt. When using this accessory, water will automatically come out as low-pressure
spray. This accessory is attached to the trigger gun.
EasyClean brush (special for gaskets)
This mode also includes a cleaning brush which, combined with water and soap, helps remove
stains and allows for a more ecient cleaning. When installing and using this accessory, water
will automatically come out as spray, at low pressure. This accessory is attached to the trigger
gun.
2-spin brush special for oors. Fig. 6
This accessory is installed on the lance of the product and consists of hard bristles. When
activated, it rotates while emitting water at high pressure, making thorough cleaning possible
in the most convenient way. It is designed to clean the patio, garden oor or oors in general.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 7408140_HydroBoost 3200 TotalClean_IM_012221116.indd 74 18/11/22 9:2318/11/22 9:23
HYDROBOOST 3200 TOTALCLEAN
75
ENGLISH
Note:t his is a wand accessory and does not t the gun. To t it,push it in and then turn to lock.
Note
Before using the 2-spin brush, you must check it will not damage the surface to be cleaned by
testing it on an inconspicuous place.
Cleaning process
The following cleaning procedure will help you organise and ensure you get the best results.
Remember to follow the previous advice.
Preparing the surface
- Clear the area of furniture and check that windows and doors are securely closed.
- Also make sure that plants and trees near the area to be cleaned are protected with a cloth.
Initial high-pressure rinse
Spray the area to be cleaned with water to clean any dirt that may have accumulated on the
surface.
Using soap
Water and soap must be used in a 1:19 ratio: 5.4% soap, 94.6% water.
Warning
Use only soaps designed for pressure washers.
- Test the soap in an inconspicuous place before using the product.
- Loosen the cap of the soap bottle and ll it with water and soap.
- Replace the cover.
- Disassemble the lance from the trigger gun.
- Attach the soap bottle to the trigger gun. Fig. 7
- Apply soap in such a way to cover the whole surface to be cleaned. Apply it from bottom to
top to prevent soap from dripping down and staining the surface.
- Leave the soap to act on the surface for several minutes. However, in particularly soiled
areas, use a brush to gently scrub. Do not allow soap to dry on the surface.
- Remove the soap bottle from the gun and replace it with the wand and nozzle or accessory
to be used.
- Rinse the soap from the surface.
Note: rinse the soap bottle with clean water after every use.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 7508140_HydroBoost 3200 TotalClean_IM_012221116.indd 75 18/11/22 9:2318/11/22 9:23
HYDROBOOST 3200 TOTALCLEAN
76
ENGLISH
Final rinse
Start the nal rinse from bottom to top. Make sure that the surface is well rinsed, and that all
dirt has been removed.
Turning o
- Make sure there is no detergent in the system.
- Turn o the motor. Turn o the water supply.
- Once the product and the water supply have been turned o, press the trigger to
depressurise the device.
- After each use, wipe the surface of the pressure washer with a clean, damp cloth.
Warning
- Do not turn o the water supply until the motor has been switched o, as this could cause
serious damage to the pump and motor.
- Do not remove the high-pressure hose from the machine while the system is being
pressurised. To depressurise the device, turn o the motor and water supply and press the
trigger 2 or 3 times.
Tips for extending the shelf life of the product
- Do not use the product without water.
- Do not use the product with hot water.
- Never use the unit for more than 1 minute without spraying water.
5. CLEANING AND MAINTENANCE
- Use only cleaning products specic for pressure washers.
- The machine must be switched o and disconnected from the mains for cleaning or
maintenance.
- Do not store the pressure washer outdoors or where it can freeze, the pump could be
severely damaged.
- The anti-impurities lter of the water inlet must be regularly checked to prevent blockages
in the water supply to the pump. Fig. 8
Cleaning the nozzle
A clogged or partially clogged nozzle can signicantly reduce water output and cause
intermittent jetting. To clean the nozzle:
1. Turn o and unplug the unit.
2. Disconnect the water supply. Press the trigger 2 or 3 times to release the pressure trapped
in the hose.
3. Remove the lance from the trigger gun.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 7608140_HydroBoost 3200 TotalClean_IM_012221116.indd 76 18/11/22 9:2318/11/22 9:23
HYDROBOOST 3200 TOTALCLEAN
77
ENGLISH
4. Use the nozzle-cleaning needle provided or any pointy, thin item to clean the nozzle, e.g.,
insert an unfolded paper clip into the nozzle hole. Move it inwards and outwards until all
dust and dirt is removed. Fig. 9
5. Pour water through the nozzle hole into the nozzle to clean the dirt remains. To do this,
point a lighted garden hose at the nozzle for 30-60 seconds.
6. TROUBLESHOOTING
Problem Possible causes Possible solutions
Smoke comes out of
the device.
Overheating, overloading, or
motor failure.
Switch o the device immediately
and contact
the Technical Support
Service of Cecotec.
There is not enough
pressure.
The water inlet lter is
clogged.
Air is entering from the hose
connections to the pump.
The nozzle or discharge
valve is worn or are not of
the correct size.
Clean the water inlet lter.
Check that the connections and the
locking ring are tight.
Contact the Technical Support
Service of Cecotec
The pressure washer
does not turn on.
The unit is pressurised.
The plug is not properly
connected, or the socket is
defective.
The extension cord is too
long or short.
The supply voltage is too
low.
The thermal safety switch
has tripped.
Press the gun trigger.
Check the plug,
the socket, and fuses.
Remove the extension cord.
Make sure that the mains voltage
matches the voltage stated on the
rating label of the appliance.
Switch o the device and allow it
to cool down.
Pressure uctuates. The pump is sucking in air.
The nozzle is clogged.
The valves are dirty or worn.
Hydraulic seals are worn.
Check that hoses and connections
are airtight.
Clean them with the nozzle-
cleaning needle.
Contact the Technical Support
Service of Cecotec.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 7708140_HydroBoost 3200 TotalClean_IM_012221116.indd 77 18/11/22 9:2318/11/22 9:23
HYDROBOOST 3200 TOTALCLEAN
78
ENGLISH
The motor stops
suddenly.
The extension cord is too
long or short.
The thermal safety
switch has tripped due to
overheating.
Remove the extension cord.
Make sure that the mains voltage
matches the voltage stated on the
rating label of the appliance.
7. TECHNICAL SPECIFICATIONS
Product reference: 08140
Product: Hydroboost 3200 TotalClean
Power: 3200 W
Voltage: 220-230 V~, 50 Hz
Rated pressure: 15 MPa (150 bar)
Max. pressure: 22.5 MPa (225 bar)
Vibration: ≤ 2.5 m/s
2
Nominal ow rate: 7.5 l/min
Max. ow rate: 9l/min
Most common specic weight conguration:
5 ºC - 50 ºC IPX5
Most common specic weight conguration: 26 kg
Technical specications may change without prior notication to improve product quality.
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the
product and/or cells must be disposed of separately from household waste.
When this product reaches the end of its shelf life, you should dispose of the
cells/batteries/accumulators and take them to a collection point designated
by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
9. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the
time of delivery of the product under the terms, conditions, and deadlines established by the
applicable regulations.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 7808140_HydroBoost 3200 TotalClean_IM_012221116.indd 78 18/11/22 9:2318/11/22 9:23
HYDROBOOST 3200 TOTALCLEAN
79
ENGLISH
It is recommended that repairs be carried out by qualied personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact Cecotec’s ocial Technical Support Service at +34 963 210 728.
10. COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES,
S.L. All rights reserved. The contents of this publication may not, in whole or in part, be
reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic,
mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC
INNOVACIONES, S.L.
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 7908140_HydroBoost 3200 TotalClean_IM_012221116.indd 79 18/11/22 9:2318/11/22 9:23
Fig./Img./Abb./Afb./ Rys./Obr. 1
14
16
15
11
12 13
109
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 14508140_HydroBoost 3200 TotalClean_IM_012221116.indd 145 18/11/22 9:2318/11/22 9:23
Fig./Img./Abb./Afb./ Rys./Obr. 4 Fig./Img./Abb./Afb./ Rys./Obr. 5
Fig./Img./Abb./Afb./ Rys./Obr. 2
Fig./Img./Abb./Afb./ Rys./Obr. 3
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 14608140_HydroBoost 3200 TotalClean_IM_012221116.indd 146 18/11/22 9:2318/11/22 9:23
Fig./Img./Abb./Afb./ Rys./Obr. 6
Fig./Img./Abb./Afb./ Rys./Obr. 7
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 14708140_HydroBoost 3200 TotalClean_IM_012221116.indd 147 18/11/22 9:2318/11/22 9:23
Fig./Img./Abb./Afb./ Rys./Obr. 8
Fig./Img./Abb./Afb./ Rys./Obr. 9
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 14808140_HydroBoost 3200 TotalClean_IM_012221116.indd 148 18/11/22 9:2318/11/22 9:23
www.cecotec.es
Cecotec Innovaciones S.L.
C/ de la Pinadeta s/n, 46930
Quart de Poblet, Valencia (Spain)
YV_02220128
08140_HydroBoost 3200 TotalClean_IM_012221116.indd 15208140_HydroBoost 3200 TotalClean_IM_012221116.indd 152 18/11/22 9:2318/11/22 9:23
