Cordless 3-in-1 Cleaner
WD260 Series
OWNER’S GUIDE
1. If the charging cord plug does not fit
fully into the outlet, reverse the plug. If
it still does not fit, contact a qualified
electrician. DO NOT force into outlet or
try to modify to fit.
2. To reduce the risk of shock and
unintended operation, turn o power
before servicing.
3. This 3-in-1 Cleaner consists of a
motorized nozzle, main body, pole, and
handle. These components contain
electrical connections, electrical wiring,
and moving parts that potentially present
risk to the user.
4. Before each use, carefully inspect
all parts for any damage. If a part is
damaged, discontinue use.
5. Use only identical replacement parts.
6. Use only as described in this manual.
DO NOT use the 3-in-1 Cleaner for any
purpose other than those described in
this manual.
7. DO NOT immerse or spray water on the
body of the 3-in-1 Cleaner. To clean the
surface, wipe with a dry cloth.
8. Keep the 3-in-1 Cleaner and the dock’s
cord out of reach of children. Do not
allow the appliance to be used by
children. Do not allow to be used as a toy.
Close supervision is necessary when used
near children.
9. This appliance can be used by persons
with reduced physical, sensory, or
mental capabilities or lack of experience
or knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way
and understand the hazards involved.
Cleaning and user maintenance shall not
be done by children.
10. DO NOT handle plug or 3-in-1 Cleaner
with wet hands.
11. DO NOT use without the dirty water
tank, Clean Solution Tank, filter,
brushroll, and brushroll cover in place.
12. Only use Shark® branded filters and
accessories.
13. DO NOT put any objects into nozzle
openings. DO NOT use with any opening
blocked; keep free of dust, lint, hair, and
anything that may reduce airflow.
14. DO NOT use if nozzle airflow is
restricted. If the air paths or the
motorized floor nozzle become blocked,
turn the 3-in-1 Cleaner o. Remove all
obstructions before you turn on the unit
again.
15. Keep nozzle and all 3-in-1 Cleaner
openings away from hair, face, fingers,
uncovered feet, or loose clothing.
16. DO NOT use if 3-in-1 Cleaner is not
working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.
17. Use extra care when cleaning on stairs.
18. DO NOT leave the 3-in-1 Cleaner
unattended while powered on.
19. When using on carpet or flooring, always
keep the 3-in-1 Cleaner moving over
the carpet surface or flooring to avoid
damaging the carpet fibers or flooring.
20. DO NOT place 3-in-1 Cleaner on unstable
surfaces such as chairs or tables.
21. DO NOT use to pick up:
a) Large objects
b) Hard or sharp objects (nails, screws,
or coins)
c) Large quantities of dust (e.g., drywall
dust).
d) Smoking or burning objects (hot
coals, cigarette butts, or matches)
e) Flammable or combustible materials
(lighter fluid, gasoline, or kerosene)
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY READ ALL INSTRUCTIONS BEFORE USING THIS 3-IN-1 CLEANER
SAVE THESE INSTRUCTIONS
f) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
22. DO NOT use in the following areas:
a) Poorly lit areas
b) Outdoor areas
c) Spaces that are enclosed and may
contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust)
23. Turn o the 3-in-1 Cleaner before any
adjustment, cleaning, maintenance or
troubleshooting.
24. During cleaning or routine maintenance,
DO NOT cut anything other than hair,
fibers, or string wrapped around the
brushroll
25. Allow all filters to air dry completely
before replacing in the 3-in-1 Cleaner
to prevent liquid from being drawn into
electric parts.
26. DO NOT modify or attempt to repair the
3-in-1 Cleaner or the battery yourself.
27. Use only Shark brand cleaning fluids
intended for use with this appliance to
prevent internal component damage.
BATTERY PACK
28. The battery is the power source for the
3-in-1 Cleaner. Carefully read and follow
all charging instructions.
29. To prevent unintentional starting, ensure
the 3-in-1 Cleaner is powered o before
picking up or carrying the 3-in-1 Cleaner.
DO NOT carry the appliance with your
finger on the power switch.
30. Use only Shark charger XDOCKWD200.
Use of an incorrect charger may result in
no charging, and/or unsafe conditions.
31. The battery pack is non-serviceable. Call
consumer services with any questions and
concerns.
32. Under abusive conditions, liquid may
be ejected from the battery. Avoid
contact with this liquid, as it may cause
irritation or burns. If contact occurs, flush
with water. If liquid contacts eyes, seek
medical help.
33. Battery should not be stored at
temperatures below 37.4° F (3° C) or
above 104° F (40° C) to maintain long
term battery life.
34. DO NOT charge battery at temperatures
below 40° F (5° C) or above 104° F (40°
C).
35. Store the appliance indoors. DO NOT use
or store it below 37.4° F (3° C). Ensure
the appliance is at room temperature
before operating.
36. DO NOT expose the battery to fire or
temperatures above 265° F (130° C) as it
may cause explosion.
sharkclean.comsharkclean.com
ASSEMBLY
NOTE: The Shark® battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of
a new battery.
NOTE: When assembling your HydroVac, there may be a little water in or around the water tanks. This is because we test all
our HydroVacs before you buy them to ensure the highest quality.
NOTE: To remove the handle, press the release button located on the back of the unit with a thin tool while pulling up on the
handle.
(Click)
Handle
Pole
Main Body
Nozzle
Cord Wrap
Dock
1. Align the Pole with the opening in the
Main Body and insert firmly until it clicks
into place.
2. Place the Dock on the floor near a wall
outlet and plug in the cord. Wind the
remaining cord around the Cord Wrap
on the back of the dock.
Prior to first use, charge the battery completely. A full charge takes approximately 4 hours.
LI-ION BATTERY
LED BATTERY POWER AND CHARGING INDICATOR
Charging
In Use
Low Charge
Mid Charge
Nearly Full
Full Charge
Full Charge
Mid Charge
Nearly Empty (Pulsing)
No Charge
Note: Full Charge takes approximately 4 hours.
sharkclean.comsharkclean.com
USING YOUR 3-IN-1 CLEANER
Press the release button and lift o the Clean Solution Tank.
NOTE: When docked properly, the charging lights on the Main Body will blink, indicating that charging has begun. When
charging is complete, all three indicator lights will turn o.
NOTE: The main unit comes with a partial charge. For maximum runtime, charge fully before first use (approximately 4
hours). Leaving the unit charging will not damage battery life.
NOTE: Only use Shark HydroVac Multi-Surface Concentrate and water with this product.
NOTE: Be sure to not overfill the Clean Solution Tank with more HydroVac Multi Surface Concentrate than instructed, as this
may clause streaking.
NOTE: Without sucient water supply in the clean solution tank, HydroVac will not run.
USING YOUR 3-IN-1 CLEANER
CHARGING ON THE DOCK
CORD WRAP CONTACTS
DOCK CHARGING
Charge the unit by placing it on the dock. Make sure the contacts on the body are aligned with the contacts
on the charging dock.
The Battery Icon on the main body will illuminate when charging begins.
When charging is complete and you need to use the unit again, lift it o the dock.
FILLING THE CLEAN SOLUTION TANK
REMOVE THE CLEAN SOLUTION TANK
1
FILL THE CLEAN SOLUTION TANK
Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac™ Multi-Surface
Concentrate, filling to the HYDROVAC CONCENTRATE line. Replace the cap and reinsert the tank until it clicks
into place. The top of the tank should be flush with the top of the body.
2
sharkclean.comsharkclean.com
USING YOUR 3-IN-1 CLEANER
POWER
HARD FLOOR MODE
MAINTAINING YOUR 3-IN-1 CLEANER
1. Place the unit on the charging dock.
2. Empty the Dirty Water Tank and make sure the
clean solution tank is at least half full.
3. Press the Power Button to start the Rinse Cycle.
The icon will pulse for the full 2-minute duration
of the cycle.
4. DO NOT remove the unit from the dock during
the Rinse Cycle. The icon will turn o when the
cycle is complete.
5. Empty the dirty water tank.
See LED Glossary for more information on indicator
lights during Rinse Cycle.
Press and release the Power button on the handle
to turn on power. To turn o power, press the
button again.
Use Hard Floor mode for powerful cleaning on bare
floors. To activate Hard Floor mode, turn on the unit
and tilt the handle back.
To clean stains, press the Stain Boost icon on top of
the handle. The Stain Boost light on the main body
will illuminate. To turn o Stain Boost mode and
switch back to Hard Floor mode, press the
button again.
CONTROLS RINSE CYCLE
CLEANING MODES
NOTE: Make sure the clean solution tank is at least half full and that the dirty water tank is empty before running the Rinse
Cycle.
NOTE: To prevent leakage, DO NOT place the main body on the floor. The nozzle should always be kept flat on the floor.
NOTE: If you encounter a dicult stain, use Stain Boost Mode for improved stain cleaning.
NOTE: If you encounter a stubborn odor on your floor or area rug, continue to clean in Stain Boost mode until the odor
is gone.
NOTE: If your floors are cloudy, streaky, or spotty after cleaning, it may be due to accumulated soap or grease residue. The
floor may require several cleanings with the Hydrovac.
The Rinse Cycle automatically cleans the system and the brushroll.
Recommended after every use
STAIN BOOST MODE
sharkclean.comsharkclean.com
MAINTAINING YOUR 3-IN-1 CLEANER MAINTAINING YOUR 3-IN-1 CLEANER
1. To access the brushroll, press the button on the top
of the nozzle and lift o the brushroll cover.
1. To remove the dirty water tank, press the release
button and pull out the tank.2. Remove the brushroll by pulling up on the pull tab
on the left side of the nozzle. Wipe away any debris
stuck on the back wall.
Wash thoroughly with warm water. Allow the
brushroll to air-dry completely in a well-ventilated
area for at least 24 hours.
2. To dispose of liquid waste only, pour it out though
the Easy Pour spout on the back of the dirty water
tank.
3. Reinsert the brushroll by lining up the grooves on the
end of the brushroll with the helix on the inner right side
of the nozzle, then press down on the left side of the
brushroll. When properly installed, the brushroll tab will
be flush with the left side of the nozzle
3. To dispose of solid debris, lift out the Solids
Separator. Grasp the recessed areas on the sides of
the separator and lift it out. Empty the solid debris
into the trash. If any liquid waste remains in the tank,
pour it down a drain. To clean, rinse the separator
and the tank with water.
4. To reinstall the brushroll cover, insert the tabs on the
cover into the slots on the nozzle. Press down on the
cover until it clicks into place.
4. Clean the filter housing and the foam filter after
every use. Pull out the foam filter and hand-wash
with warm water and soap.
Allow the foam filter to air-dry completely in a well-
ventilated area for 24 hours before reinstalling back
into the unit.
MANUALLY CLEANING THE BRUSHROLL
CLEANING THE DIRTY WATER TANK
1
2
1
3
1 2
NOTE: Do not place brushroll in washing machine or dishwasher. Replace the brushroll after 6 months.
NOTE: Replace the filter every 6 Months.
NOTE: Do not place dirty water tank in washing machine or dishwasher.
2
4
1
1
2
You can clean the brushroll by hand as an alternative to the Rinse Cycle, and to remove debris or hair
wrapped around the brushroll.
3 4
Pull
from here
sharkclean.comsharkclean.com
MAINTAINING YOUR 3-IN-1 CLEANER MAINTAINING YOUR 3-IN-1 CLEANER
5. After cleaning the dirty water tank and the solids
separator, allow them to air-dry in a well-ventilated
area for at least 24 hours. To reinstall the tank, insert
the bottom into the opening in the main body, then
tilt the tank back until it clicks into place.
5
1. Turn o the power.
2. Remove the brushroll cover, brushroll, and dirty
water tank.
3. Check the openings and remove all debris.
4. When finished, reinstall the brushroll and the cover.
CHECKING FOR BLOCKAGES
ORDERING REFILLS AND PARTS
If you run over a hard or sharp object or notice a noise change while using your unit, check for blockages or
objects caught in the brushroll, nozzle chamber, or inlet hose.
Replace the filter and brushroll every 6 months.
Only use Shark HydroVac™ Concentrate or water with this product.
To order brushrolls, filters, and Shark HydroVac Multi-Surface Concentrate, please visit sharkclean.com or
scan the QR code below.
sharkclean.comsharkclean.com
LED GLOSSARY LED GLOSSARY
SCENARIO VISUAL
DETAILS
UNIT IS IN USE
Single battery icon is on. Solid.
Battery low. Note - you will not be able to run a Rinse Cycle.
Rinse icon is pulsing.
Pulsing
Place unit on dock while Rinse icon is pulsing. Press Power button to run Rinse
Cycle.
Single battery icon is pulsing.
Pulsing
Battery is close to running out.
Rinse icon has turned o.
O
Insucient battery life needed to run Rinse Cycle after use.
UNIT IS PLACED ON THE DOCK
Battery icons are pulsing.
Pulsing
Unit is charging
Rinse icon is on.
On
There is sucient battery life to run a Rinse Cycle
Press Power button to run a Rinse Cycle
Rinse icon is o.
O
There is not sucient battery life to run Rinse Cycle
Wait until Rinse turns on to run a Rinse Cycle
Power button is pressed to activate
Rinse Cycle. Battery icons and Rinse icon
flash three times.
Flash ×3
Unit is charging. There is not sucient battery life to run a Rinse Cycle
Wait until Rinse icon turns on to run a Rinse Cycle
Power button is pressed to activate
Rinse Cycle. Rinse icon is pulsing.
Pulsing
Rinse Cycle is running. Rinse icon will turn o when cycle is complete.
Battery icons will turn on and unit will begin charging
RINSE CYCLE IS IN PROCESS; RINSE
CYCLE PAUSES
Rinse icon is flashing.
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill Clean solution tank and press Power button to
resume Rinse Cycle.
Rinse icon is flashing.
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty Dirty water tank and press the Power button to
resume Rinse Cycle
UNIT IS IN USE;
CLEANING FUNCTIONS TURN OFF
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill clean solution tank, press Power button to resume
cleaning
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty dirty water tank. Press Power button, resume
cleaning. *If this is a false error, remove the solids separator and clean completely.
Allow part to dry for 24 hours or dry manually.
Red water droplet icon is flashing.
Red Stain Boost icon is flashing.
Flashing
Brushroll cover has been removed. Attach brushroll cover. Press Power button to
resume cleaning.
Red water droplet icon is flashing.
Red Stain Boost icon is flashing.
Flashing out of sync
Brushroll is jammed. Remove brushroll cover and brushroll. Remove any object that
may be causing the brushroll to jam. Press Power button resume cleaning.
SCENARIO
VISUAL DETAILS
UNIT IS IN USE
Single battery icon is on.
Solid. Battery low. Note - you will not be able to run a Rinse Cycle.
Rinse icon is pulsing.
Pulsing
Place unit on dock while Rinse icon is pulsing. Press the power button to run Rinse
Cycle.
Single battery icon is pulsing.
Pulsing
Battery is close to running out.
Rinse icon has turned o.
O
Insucient battery life to run Rinse Cycle after use.
UNIT IS IN PLACED ON THE DOCK
Battery icons are pulsing.
Pulsing
Unit is charging.
Rinse icon is on.
On
There is sucient battery life to run a Rinse Cycle.
Press the power button to run a Rinse Cycle.
Rinse icon is o.
O
There is not sucient battery life to run Rinse Cycle.
Wait until Rinse icon turns on to run a Rinse Cycle.
Power button is pressed to activate
Rinse Cycle. Battery Icons and Rinse icon
flash three times.
Flash ×3
Unit is charging. There is not sucient battery life to run a Rinse Cycle.
Wait until Rinse icon turns on to run a Rinse Cycle.
Power button is pressed to activate
Rinse Cycle. Rinse icon is pulsing.
Pulsing
Rinse Cycle is running. Rinse icon will turn o when cycle is complete.
Battery icons will turn on and unit will begin charging.
Rinse Cycle IS IN PROCESS; Rinse Cycle
PAUSES
Rinse icon is flashing
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill clean solution tank and press the power button to
resume Rinse Cycle.
Rinse icon is flashing
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty dirty water tank and press the power button to
resume Rinse Cycle.
UNIT IS IN USE;
CLEANING FUNCTIONS TURN OFF
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill clean solution tank and press the power button to
resume cleaning.
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty dirty water tank. Press the power button, resume
cleaning. *If this is a false error, remove the solids separator and clean completely.
Allow part to dry for 24 hours or dry manually.
Red water droplet icon is flashing.
Red Stain Boost icon is flashing.
Flashing
Brushroll cover has been removed. Attach brushroll cover. Press the power button to
resume cleaning.
Red water droplet icon is flashing.
Red Stain Boost icon is flashing.
Flashing out of sync
Brushroll is jammed. Remove brushroll cover and brushroll. Remove any object that
may be causing the brushroll to jam. Press the power button resume cleaning.
sharkclean.comsharkclean.com
THREE (3) YEAR LIMITED WARRANTY
The Three (3) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja
Operating LLC. Warranty coverage applies to the original owner and to the original product only and is
not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period
of three (3) years from the date of purchase when it is used under normal household conditions and
maintained according to the requirements outlined in the Owner’s Guide, subject to the following
conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be
repaired or replaced up to three (3) years from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the
receipt date of the replacement unit or the remainder of the existing warranty, whichever is later.
SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as Shark Cleaner, Pad, etc.), which require regular
maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this
warranty. Replacement parts are available for purchase at sharkaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse (e.g., not cleaning the filters or not removing debris from the brushroll), abuse,
negligent handling, failure to perform required maintenance, or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused
in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the
repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty
period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service
Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options,
including the possibility of upgrading to our VIP warranty service options for select product categories. So
we may better assist you, please register your product online at registeryourshark.com and have the product
on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of
$25.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase.
We also ask that you register your product online at registeryourshark.com and have the product on hand
when you call, so we may better assist you. A Customer Service Specialist will provide you with return and
packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to
state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the
above may not apply to you.
THREE (3) YEAR LIMITED BATTERY WARRANTY
The Three (3) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja
Operating LLC. Warranty coverage applies to the original owner and to the original product only and is
not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period
of three (3) years from the date of purchase when it is used under normal household conditions and
maintained according to the requirements outlined in the Owner’s Guide, subject to the following
conditions and exclusions:
What is covered by this warranty?
1. The original battery deemed defective, in SharkNinja’s sole discretion, will be replaced up to three (3)
years from the original purchase date.
2. In the event a replacement battery is issued, the warranty coverage ends six (6) months following the
receipt date of the replacement battery or the remainder of the existing warranty, whichever is later.
SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of the battery, which requires optimal temperature storage and operation to ensure
its proper functioning.
2. A battery that has been tampered with or used for commercial purposes.
3. Damage caused by misuse (e.g., exposing battery to liquids or extreme hot and/or cold temperatures), abuse,
negligent handling, failure to perform required maintenance, or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused
in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the
repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your battery fails to operate properly while in use under normal household conditions within the warranty
period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service
Specialists are also available at 1-800-798-7398 to assist with product support and warranty service
options. So we may better assist you, please register your product online at registeryourshark.com and
have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for replacement. A fee of $20.95
(subject to change) will be charged when SharkNinja ships the replacement unit.
How to initiate a warranty claim
You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase.
We also ask that you register your product online at registeryourshark.com and have the product on hand
when you call, so we may better assist you. A Customer Service Specialist will provide you with return and
packing instruction information when you call. A Customer Service Specialist will provide you with return
and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to
state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the
above may not apply to you.
sharkclean.comsharkclean.com
BATTERY REMOVAL AND DISPOSAL
This product uses a lithium-ion rechargeable and recyclable battery. When the battery no longer holds a
charge, it should be removed from the unit and recycled. DO NOT incinerate or compost the battery.
When your lithium-ion battery needs to be replaced, dispose of it or recycle it in accordance with local
ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a
municipal solid waste stream. Return spent battery to an authorized recycling center or to retailer for recycling.
Contact your local recycling center for information on where to drop o the spentbattery.
The RBRC™ (Rechargeable Battery Recycling Corporation) seal on the lithium-ion battery indicates that the
costs to recycle the battery at the end of its useful life have already been paid by SharkNinja. In some areas,
it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste stream and the RBRC
program provides an environmentally conscious alternative.
RBRC, in cooperation with SharkNinja and other battery users, has established programs in the United
States and Canada to facilitate the collection of spent lithium-ion batteries. Help protect our environment
and conserve natural resources by returning the spent lithium-ion battery to an authorized SharkNinja
service center or to your local retailer for recycling. You may also contact your local recycling center for
information on where to drop o the spent battery, or call 1-800-798-7398.
TECHNICAL SPECIFICATIONS
Voltage: 21.6V
TIP: You can find the model and serial numbers on
the QR code label on the bottom of the back of the
3-in-1 Cleaner.
RECORD THIS INFORMATION
Model Number: �����������������������������
Date Code: ���������������������������������
Date of Purchase: ���������������������������
(Keep receipt)
Store of Purchase: ���������������������������
REGISTER YOUR PURCHASE
registeryourshark.com
NOTES
sharkclean.comsharkclean.com
© 2024 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. MESSMASTER and
SHARK HYDROVAC are trademarks of SharkNinja Operating LLC. RBRC is a trademark of Rechargeable Battery Recycling
Corporation.
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Owner’s Guide is designed to help you get a complete understanding of your new
Shark HydroVac™ MessMaster™ Cordless 3-in-1 Cleaner.
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-800-798-7398
sharkclean.com
Illustrations may dier from actual product. We are constantly striving to improve our products,
therefore the specifications contained herein are subject to change without notice.
This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more
information.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Caution: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
All testing on carpet (e.g., per ASTM-F608) shall be conducted in Stain Boost mode.
