NutriBullet NBF50700 SmartSense Blender

User guide.

Important safeguards.

When operating your nutribullet

device, remember:

SAFETY COMES FIRST. WHEN USING ANY ELECTRICAL APPLIANCE. BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE FOLLOWING:

WARNING! To avoid the risk of serious injury, death, property damage, or

damage to your device, carefully read all instructions before operating your

nutribullet

device. When using any electrical appliance, basic safety

precautions should always be observed, including the important information

in this User Guide.

If you let anyone else use your nutribullet

, make sure that they understand the health

and safety information in this User Guide, as well as any additional safety or usage

instructions provided. Each person using a device should carefully read the User

Guide in its entirety to become familiar with the safe operation of the unit.

Save these instructions!

FOR HOUSEHOLD USE ONLY

GENERAL USE AND SAFETY:

Failure to follow all instructions

regarding the use of your nutribullet

device may result in serious personal

injury, death, or property damage.

Be aware of possible hazards when

using or storing your nutribullet

WARNING! EXTREME CAUTION

SHOULD BE EXERCISED WHEN USING

HOT, WARM, OR CARBONATED

INGREDIENTS. NEVER BLEND

HOT, WARM, OR CARBONATED

INGREDIENTS IN THE CUP AS

CONTENTS MAY PRESSURIZE

AND MAY ERUPT UPON OPENING,

CAUSING SERIOUS BODILY INJURIES

OR DAMAGE. USE ONLY THE

BLENDING PITCHER AND VENTED

PITCHER LID TO BLEND HOT, WARM,

OR CARBONATED INGREDIENTS.

• Do not use the nutribullet

for other

than its intended purpose.

• Do not leave or put non-food items

in any of the attachments when

blending. Doing so may damage

the unit or crack or shatter the

attachment, resulting in bodily injury

or property damage.

• Close supervision is necessary when

any appliance is used by or near

children to ensure they do not play

with the appliance. Keep cord out of

reach of children.

• This appliance is not intended for

use by persons (including children)

with reduced physical, sensory,

or mental capabilities, or lack of

experience and knowledge, unless

they are closely supervised and

instructed concerning the use of the

appliance by a person responsible

for their safety.

• NEVER LEAVE THE NUTRIBULLET

UNATTENDED WHILE IT IS IN USE.

• Do not place or operate your

nutribullet

on uneven or

unstable surfaces.

• The risk of ﬁre, shock, or damage

to nutribullet

during cleaning

can be reduced by taking the

following precautions:

– Turn o your device and unplug it

before cleaning.

– Only clean the exterior of

your device.

– Clean your device with a dry cloth.

• To protect against the risk of

electrical shock, DO NOT immerse

the Motor Base in water or other

liquid. The Motor Base should only

be cleaned by gently wiping with a

clean cloth.

• Do not place any nutribullet

part

or accessory in a microwave,

conventional oven, air fryer, or

stovetop pot, or immerse in boiling

water, as this will damage the part.

• Do not place or operate your

nutribullet

on or near a hot gas or

electric burner, or in a heated oven.

WARNING! NEVER WASH

YOUR NUTRIBULLET

PARTS

OR ACCESSORIES USING THE

SANITIZE OR HEAT CYCLE OF YOUR

DISHWASHER. DOING SO CAN WARP

THE PART, WHICH CAN CREATE

HAZARDOUS CONDITIONS DURING

USE THAT MAY RESULT IN BODILY

INJURY OR PROPERTY DAMAGE.

• NEVER place any nutribullet

parts or

accessories in the freezer. Do not use

nutribullet

parts and accessories as

storage containers in the freezer.

• Never attempt to defeat any

safety interlock mechanisms on

the appliance.

• Remove and safely discard any

packaging material or promotional

labels before using the appliance for

the ﬁrst time.

• Do not operate your nutribullet

any of the parts and accessories

are or appear to be damaged in

any manner that may impair proper

function or create a safety hazard.

If you suspect your nutribullet

parts and/or accessories may be

damaged, contact Customer Service

for assistance at 1 (800) 523-5993.

• Do not use parts, accessories

or attachments from other

manufacturers, dierent models

of nutribullet

or magic bullet

products, or canning jars. Use of

parts, accessories or attachments

NOT speciﬁcally designed for your

particular nutribullet

device may

damage your unit or cause serious

bodily injury, ﬁre, or electric shock.

– Use only genuine nutribullet

attachments/accessories

speciﬁcally designed for your

nutribullet

device. Aftermarket

parts are not made to nutribullet

speciﬁcations and may damage

your unit or cause serious injury.

• DO NOT USE OUTDOORS.

• ALWAYS UNPLUG YOUR

NUTRIBULLET

WHEN NOT IN USE.

• To unplug, grasp the plug and pull

from the outlet. Never pull from the

power cord.

• Always POWER OFF and UNPLUG

the unit and wait until the Blade

comes to a complete stop before

assembling, disassembling,

changing accessories, or cleaning.

• This appliance has a polarized

polarized plug, on which one blade

is wider than the other. To reduce

the risk of electric shock, this plug

will ﬁt in a polarized outlet only one

way. If the plug does not ﬁt into the

outlet properly, reverse the plug. If it

still does not ﬁt, contact a qualiﬁed

electrician. Do not modify the plug

in any way.

BLENDING WITH

NUTRIBULLET

CUPS:

WARNING! NEVER BLEND

HOT, WARM, OR CARBONATED

INGREDIENTS OR LIQUID IN THE

NUTRIBULLET

CUP! HEATED OR

CARBONATED INGREDIENTS CAN

PRESSURIZE THE CONTENTS,

WHICH MAY CAUSE THE CUP AND

BLADE TO FORCIBLY SEPARATE

UPON OPENING OR REMOVING

FROM MOTOR BASE. THIS MAY

RESULT IN THE EXPULSION OF HOT

CONTENTS FROM THE CUP OR

EXPOSURE OF THE BLADE, BOTH

OF WHICH MAY RESULT IN SERIOUS

BODILY INJUIRES (INCLUDING

THERMAL BURNS) OR PROPERTY

DAMAGE. ONLY USE THE BLENDING

PITCHER AND VENTED PITCHER

LID TO BLEND HOT, WARM, OR

CARBONATED INGREDIENTS.

WARNING! NEVER BLEND FOR

LONGER THAN ONE MINUTE.

To avoid heating and

overpressurizing the Cup:

• NEVER blend hot, warm, or

carbonated ingredients in the

nutribullet

Cups.

– Only blend room-temperature or

refrigerated ingredients

(70°F/21°C or cooler). After

blending, transfer the mixture to a

stovetop pot to heat and eat.

• NEVER blend for longer than

one minute.

– Friction from the rotating blades

can cause contents to heat and

pressurize. Continuous blending

for more than one minute may

cause the Cup to separate from

the Blade, exposing the Blade or

expelling heated ingredients, both

of which can cause injury.

– Do not run consecutive one-minute

blending cycles. Allow contents

to settle for at least 10 to 15 minutes

and release any built-up pressure

by opening the Cup slowly and

carefully, pointing away from your

body, before running another

blending cycle.

WARNING! NEVER ATTEMPT TO

OPEN THE CUP IF IT FEELS HOT OR

WARM TO THE TOUCH. SEE CUP

CAUTION SECTION FOR DETAILS.

• Do not blend anything carbonated or

eervescent.

– Carbonated and eervescent

ingredients (carbonated water,

baking powder, baking soda,

yeast, some batters, cake mix, dry

ice, or other things that become

bubbly) release gasses that

increase pressure within the Cup.

Pressure from released gases can

cause a sealed nutribullet

Cup

to separate, resulting in possible

injury and/or property damage.

NOTE: Some protein powders

include eervescent ingredients.

Always check supplement

ingredients before adding.

• Do not overﬁll.

– Filling above the MAX line can

result in leakage. The cyclonic

action of the nutribullet

requires

space to blend eectively.

Exceeding the MAX line can

result in leakage and may

create dangerous conditions for

pressurization, which can cause

the Cup and Extractor Blade to

separate, resulting in possible

injury and/or property damage.

• DO NOT leave blended foods inside

a sealed Cup.

– Blended mixtures can spoil and

ferment, increasing pressure

when left inside the Cup.

– Use the To-Go Lid or transfer to a

vented container for storage

after blending.

CUP CAUTION:

WARNING! NEVER ATTEMPT TO

OPEN A SEALED NUTRIBULLET

CUP

IF IT FEELS HOT OR WARM TO THE

TOUCH. THE CONTENTS MAY BE

HEATED AND PRESSURIZED, WHICH

CAN CAUSE THE CUP TO VIOLENTLY

SEPARATE WHEN OPENED AND

POTENTIALLY RESULT IN BODILY

INJURY AND/OR BURNS. IF THE

CUP FEELS HOT OR WARM, TAKE

THE FOLLOWING PRECAUTIONS:

1. Stop blending and unplug the unit.

2. LEAVE ALONE. DO NOT TOUCH. DO

NOT OPEN. Leave the Cup where it

is and do not touch it or allow others

to touch it.

3. DO NOT attempt to remove the

Cup from the Motor Base. DO NOT

attempt to twist-o the Extractor

Blade from the Cup.

4. Allow the Cup to cool for at least

30 minutes.

5. After 30 minutes, check if the Cup is

completely cooled. If it is still warm,

give it more time to cool.

6. Once the Cup is cool to the touch,

slowly and carefully disengage it

from the Motor Base.

7. Point the Cup away from your face

and body. Use a towel to slowly

untwist the Extractor Blade from the

cup, gently releasing any residual

pressure as you open.

WARNING! NEVER ATTEMPT

TO SEPARATE THE CUP FROM

THE EXTRACTOR BLADE BY

FORCING OR PRYING APART THE

COMPONENTS. DOING SO MAY

CRACK OR SHATTER THE CUP,

WHICH CAN RESULT IN BODILY

INJURY. IF YOU ARE UNABLE

TO UNTWIST THE EXTRACTOR

BLADE FROM THE CUP, CONTACT

CUSTOMER SERVICE AND

PROPERLY DISPOSE OF THE CUP

AND ITS CONTENTS.

• NEVER handle the a sealed

nutribullet

Cup if it feels hot

or warm.

• If the Cup is cool, securely wrap or

box the Cup as the contents may

ferment and pressurize causing the

Cup to forcibly separate, which may

result in bodily injury or property

damage.

• DO NOT dispose or leave a sealed

Cup in an indoor trash container.

Dispose of the securely wrapped

or boxed Cup at the bottom of a

covered outdoor trash container.

CUP SAFETY:

Proper Cup use is important for the

safe operation of your nutribullet

Using the Cup inconsistent with these

instructions may result in bodily injury,

property damage, or damage to your

unit. Remember, NEVER blend hot,

warm, or carbonated ingredients

or liquid in the nutribullet

Cup, and

NEVER blend for more than one minute.

• ALWAYS securely tighten the

Extractor Blade to the Cup. An

improperly tightened Extractor

Blade may lead to leakage. If the

Cup starts to leak during blending,

DO NOT attempt to disengage the

Cup from the Motor Base as the Cup

may separate from the Blade, which

can expose the Blade and cause

laceration injuries. If you notice

leakage, DO NOT attempt to remove

the Cup. Immediately unplug the unit

and allow the blades to come to a

complete stop before removing the

Cup from the Motor Base.

• Always make sure the Cup is

securely locked onto the Motor Base

before blending. The motor will not

turn on unless the Cup is set in the

locked position.

• Do not overﬁll or exceed the MAX

line. Exceeding the MAX line can

result in leakage.

• Do not remove the Cup while the unit

is in operation.

• NEVER operate your nutribullet

with an empty Cup attached.

• Do not crush ice or overﬁll the

Cup with ice. Your nutribullet

not intended to be used as an ice

crusher. Overﬁlling the Cup with ice

may cause the ice to wedge into the

Blade, which can jam the Blade and

cause the motor to overheat.

• Always use sucient liquid

ingredients when blending.

• Do not place any nutribullet

parts

or accessories on the bottom rack

or use the heat/sanitize cycle on

your dishwasher.

• Cups, To-Go Lids, and other

nutribullet

parts or accessories are

NOT microwave-safe.

• Do not use the Extractor Blade as

a storage lid, as it is not vented.

Your blended mixture can ferment,

increasing pressure within the

Cup, which may cause separation

that can lead to bodily injury and

property damage. Use the To-Go Lid

or transfer to a vented container for

storage after blending.

• To reduce the risk of injury, never

place or store an exposed Extractor

Blade on the Motor Base without the

Cup properly attached.

• Do not leave any non-food items in

the Cup when blending. Remove all

utensils from the Cup.

• Do not blend stone fruit in this

appliance unless pits/seeds have

been removed. Fruit pits may

damage the Cup, potentially resulting

in shattering and personal injury. In

addition, apple seeds and the pits

of cherries, plums, peaches, and

apricots contain a chemical known

to release cyanide into the body

when ingested.

• Periodically inspect your nutribullet

Cup for damage or wear that may

impair proper function or create a

safety hazard.

• Do not use the Cup if you detect

cracking, cloudiness, or other

damage. You may purchase new

Cups at nutribullet.com or by

contacting Customer Service.

• Periodically inspect your Extractor

Blade. If the blades do not rotate

freely or if the gasket is missing or

damaged, immediately discontinue

use and contact Customer Service.

• Do not use after-market replacement

parts for your nutribullet

. After-

market replacement parts may result

in damage to your nutribullet

present safety hazards resulting in

bodily injury or damage. Only

order replacement parts

from nutribullet.com or by contacting

Customer Service at

1 (800) 523-5993. Please specify

the model for parts that are

compatible with your unit.

USING THE BLENDING PITCHER:

WARNING! ONLY USE THE

BLENDING PITCHER WITH THE

VENTED PITCHER LID TO BLEND

HOT, WARM, OR CARBONATED

INGREDIENTS. NEVER BLEND

HOT, WARM, OR CARBONATED

INGREDIENTS IN A NUTRIBULLET

CUP, AS CONTENTS MAY

PRESSURIZE AND ERUPT UPON

OPENING, CAUSING SERIOUS

BODILY INJURIES OR DAMAGE.

• NEVER use your nutribullet

Cups

to blend hot, warm, or carbonated

ingredients or liquids.

• ALWAYS ax the Vented Pitcher Lid

to the Blending Pitcher with the spout

down and closed before blending to

prevent ingredients from splashing

or hot ingredients from splattering,

which may cause burns, bodily

injuries, or property damage.

• After blending hot ingredients

or liquids, exercise caution when

opening the Pitcher Lid, and be

mindful of escaping hot steam or

splattering hot ingredients.

• Do not overﬁll the Blending Pitcher

beyond the MAX line.

• Do not use the Blending

Pitcher if you detect cracking,

cloudiness, or other damage.

Visit nutribullet.com or contact

Customer Service to purchase a

new Blending Pitcher.

WARNING! TO INCORPORATE

INGREDIENTS DURING BLENDING,

CAREFULLY OPEN THE LID CAP

FROM THE PITCHER LID AND GENTLY

POUR OR DROP INGREDIENTS

INTO THE MIXTURE. BE ESPECIALLY

MINDFUL WHEN ADDING TO HOT

INGREDIENTS AND LIQUIDS, AS

ESCAPING STEAM OR SPLATTERS

MAY PRESENT A RISK OF INJURY.

• When using manual speeds, start

blending on the LOW setting and,

once ingredients are integrated,

adjust the speed as needed.

BLENDER PITCHER SAFETY:

Proper Blending Pitcher use is

important for the safe operation of your

nutribullet

. Using the Blending Pitcher

inconsistent with these instructions may

result in bodily injury, property damage,

or damage to your unit.

• Only operate the Blending Pitcher

with the Pitcher Lid securely locked in

place and the spout closed.

• Before blending, check that the vent

slots on the Pitcher Lid are clear and

unobstructed. Clogged or obstructed

vent slots will pressurize the contents,

which can cause the release of hot

steam or splattered ingredients

upon opening.

• For recipes that require certain

ingredients to be incorporated

during blending, ﬁrst add the base

ingredients, then attach the Pitcher

Lid and begin blending. Once the

ingredients are mixed well, twist open

the Vented Lid Cap and carefully pour

or drop ingredients into the blended

mixture. If the blended mixture is

hot or warm, use caution and open

the Vented Lid Cap slowly, being

mindful of escaping hot steam or the

splattering of hot ingredients. Always

reinstall the Vented Lid Cap after

adding ingredients.

• NEVER place hands or use utensils

such as spatulas, spoons, or other

tools that may make contact with

the spinning blades while in

operation. Doing so can damage

the unit, shatter the Blending Pitcher,

or cause severe bodily injury or

property damage.

• ONLY USE THE TAMPER PROVIDED

with your nutribullet

through the

cover opening to push ingredients

closer to the Blade. NEVER use the

Tamper without the Pitcher Lid in

place. The Tamper is speciﬁcally

designed to avoid contact with the

Blade through the Pitcher Lid. A

scraper may be used, but only when

the blender is powered o and the

blades are at a complete stop.

GENERAL BLADE SAFETY:

WARNING! BLADES ARE

SHARP! HANDLE WITH CARE TO

AVOID BODILY INJURY. NON-FOOD

ITEMS OR HARD INGREDIENTS

MAY DAMAGE THE BLADES.

ROUTINELY INSPECT THE BLADES

AND DISCONTINUE USE IF THE

BLADES ARE DAMAGED OR DO

NOT FREELY ROTATE. CONTINUED

USE WITH DAMAGED BLADES OR

USE INCONSISTENT WITH THESE

INSTRUCTIONS MAY RESULT

IN BODILY INJURY, PROPERTY

DAMAGE, OR DAMAGE TO

YOUR UNIT.

NEVER STORE THE UNIT WITH

THE BLADE EXPOSED. ALWAYS

COVER THE BLADE WITH THE

CUP OR PITCHER LID. EXPOSED

BLADES PRESENT A LACERATION

HAZARD THAT MAY CAUSE SEVERE

PERSONAL INJURY.

• Always POWER OFF and UNPLUG the

unit and wait until the Blade comes to

a complete stop before assembling,

disassembling, changing accessories,

or cleaning.

• ALWAYS securely tighten the

Extractor Blade to the Cup to prevent

leakage. If a leak occurs, power o or

unplug the unit and allow the motor

to come to a complete stop before

removing.

• DO NOT crush ice. Your nutribullet

is not intended to be used as an ice

crusher, which may shatter the Cup

or Pitcher, causing injury or

damage. Always use sucient liquids

when blending.

• Do not overload the Cup or Pitcher as

this may prevent the blades

from spinning.

• Do not attempt to grind dry

ingredients such as grains, cereal,

or coee, as this may overheat the

motor and/or damage the blades.

• AVOID CONTACT WITH MOVING

PARTS! Keep hands and utensils out

of and away from the Blade to reduce

the risk of severe personal injury or

damage to the unit.

• NEVER place the Extractor Blade or

other accessory parts on the bottom

rack of the dishwasher or use the

heat/sanitize cycle while cleaning

the components in the dishwasher.

• Periodically inspect your Blade. If

the blades do not rotate freely or are

damaged, immediately discontinue

use and contact Customer Service.

For optimal performance, we

recommend replacing the Blade

every 6 months, or as needed,

depending on use.

• Use of incompatible parts or

aftermarket parts may result in

damage to your nutribullet

unit

or present safety hazards that

may cause personal injury or

property damage. When ordering

replacement parts, always use

genuine nutribullet

parts and

accessories from nutribullet.com or

contact Customer Service at:

1 (800) 523-5993.

ELECTRICAL SAFETY:

Modiﬁcation, improper use, and

failure to follow the instructions for

proper setup, use, and care of your

nutribullet

device can increase the risk

of property damage, serious personal

injury, or death.

• NEVER use the unit in countries

or locations with incompatible

electrical speciﬁcations or plug

types.

• DO NOT use the unit with a voltage

converter device, as it may cause

electrical shorting, ﬁre, or electric

shock, all of which may result

in personal injury or property

damage.

• Do not use the unit if the cord, plug,

or Motor Base has been immersed in

water or other liquids.

• Do not use the unit in a wet area,

or anywhere it could become wet.

Any signiﬁcant spillage on, under, or

around the Motor Base should be

cleaned and dried before plugging

in and using the unit.

• Do not attempt to plug the unit into

an electrical outlet with wet hands.

• Avoid contact with the touchscreen

display when the power icon is

illuminated to prevent inadvertent

and unexpected operation of

the unit.

• Do not modify the electrical cord

in any way.

• Do not operate any unit with a

damaged electrical cord or plug.

The electrical cord and plug are not

suitable for replacement. If damaged,

the appliance should be replaced.

Contact Customer Service for

assistance at 1 (800) 523-5993.

• Do not allow or place the electrical

cord near or touching any hot

surfaces, heat source, or ﬂame,

including the stove.

• Do not allow the electrical cord

to hang over the edge of a table

or counter.

• Do not pull, twist, or damage the

power cord.

• Overloading the unit with ice or other

ingredients may overheat the motor

and engage the thermal breaker. If

the internal thermal breaker shuts

o the motor, unplug the Motor Base

and let it cool for an hour before

attempting to use it again. The

thermal breaker will reset when the

unit is unplugged and the thermal

breaker cools down.

• Always UNPLUG your nutribullet

when it is not in use, and when

assembling, disassembling, changing

accessories, or cleaning.

• NEVER pull the power cord to remove

the plug from the outlet. To unplug,

grasp the plug and pull from

the outlet.

• Use of incompatible parts or

aftermarket parts may result in

damage to your nutribullet

present safety hazards that may

cause personal injury or property

damage. When ordering replacement

parts, always use genuine nutribullet

parts and accessories from

nutribullet.com

or contact Customer Service at

1 (800) 523-5993.

VENTILATION:

• NEVER obstruct the ventilation

openings on the bottom of the

Motor Base of your nutribullet

device. Openings on the bottom of

the Motor Base should be free

of dust and lint and never

obstructed. Obstructing the

ventilation openings may overheat

the motor, presenting a ﬁre hazard

that may cause property damage,

serious personal injury, or death.

• ALWAYS operate the nutribullet

a level surface, leaving unobstructed

space beneath and around the

Motor Base to permit proper air

circulation. Slots on the bottom

of the Motor Base are provided

for ventilation to ensure reliable

operation and to prevent the motor

from overheating.

• NEVER place your nutribullet

top of ﬂammable materials such

as newspapers, tablecloths,

napkins, dishtowels, placemats,

or similar materials.

MEDICAL SAFETY:

Always consult your physician

regarding health and nutrition

concerns and advice. The information

contained in this User Guide,

accompanied Recipe Guide, and/or

online recipes are general suggestions

and ideals, and are not meant to

replace the advice of your physician.

MEDICATION INTERACTIONS:

• If you are taking any medications,

especially cholesterol-lowering

medication, blood thinners, blood

pressure drugs, tranquilizers, or

antidepressants, please check with

your physician before trying any of

the recipes contained in the Recipe

Guide or published online.

• ALWAYS follow recommended

maintenance and care instructions

in the User Guide.

• NEVER operate your nutribullet

with damaged components. If your

nutribullet

malfunctions in any

way, immediately discontinue use

and contact Customer Service at

1 (800) 523-5993. If you have any

comments, questions, or concerns,

please go to nutribullet.com or call

Customer Service.

Save these

instructions!

1110

Contents.

2 Important safeguards

12 What’s included

13 Assembly guide

14 Control panel

16 Blending with the Pitcher

20 Blending with the Cup

23 Care & maintenance

26 nutribullet SmartSense™ Blender

Combo one-year limited warranty

Thank you for purchasing the nutribullet

SmartSense™ Blender Combo.

1312

Product conﬁgurations may vary. To see our full list of nutribullet

accessories,

please visit nutribullet.com

Motor Base

Pitcher

Pitcher Lid (Straight On)

24 oz handled cup

32 oz cup

2 to-go lids

What’s included.

1400-watt

motor base

2 to-go lids

pitcher

24oz

handled cup

32oz cup

pitcher lid with

vented lid cap

Assembly guide.

nuribullet

cup

vented lid cap

pitcher lid

easy-pour

spout

tamper

extractor

blade

pitcher

control panel

integrated blade

motor base

suction feet

Extractor blade

tamperexctractor

blade

1514

Control panel.

AUTO

The AUTO button runs a

fully-automated cycle that

determines the exact time,

speed, and setting needed to

optimally blend ingredients.

NOTE: Any of the 5 speeds or AUTO

program can be used with both the

single serve cups and the blending

pitcher. When blending with the single

serve cups, the unit will automatically

stop after 60 seconds of blending.

POWER

The Power button turns on

the unit and illuminates the

Control Panel.

The + button increases the

blending speed within a range

of 1 to 5. Blending speeds must

be set prior to blending, and

can be adjusted at any point of

the blending process.

—

The — button decreases the

blending speed within a range

of 1 to 5. Blending speeds must

be set prior to blending, and

can be adjusted at any point of

the blending process.

BLEND

The Solid Circle BLEND button

activates blending for manual

speeds. Press the BLEND button

once to start blending, and a

second time to stop.

PULSE

The Dashed Circle PULSE

button activates the PULSE

blending function. Set your

blending speed, then press the

PULSE button for hands-on

control over blending time.

Press and release quickly to

pulse in short bursts, or press

and hold the button down for a

longer pulse.

TIMER

An LED timer counts up during

the blending cycle to keep

track of the length of your

blends. Both manual and

AUTO blending programs

display the timer during

blending. The speed setting

is displayed in the status bar

above the timer.

Motor Base UIs

1716

• Make sure the Motor Base is

plugged in for use.

• DO NOT attempt to operate the

Blending Pitcher on the appliance

without attaching the Pitcher Lid

and Vented Lid Cap.

• Never run the appliance

while empty.

• Appliance accessories are

not intended to be used in the

microwave; microwaves may

damage the accessories.

• Never leave the appliance

unattended while in use. Use extra

caution when blending hot liquids in

the Pitcher.

WARNING! ALWAYS ATTACH

THE PITCHER LID AND VENTED

PITCHER LID CAP TO THE PITCHER

BEFORE BLENDING HOT LIQUIDS

TO PREVENT SPLATTERING OF

CONTENTS WHICH MAY CAUSE

BURNS AND BODILY INJURIES. THE

VENTED LID CAP IS VENTILATED

TO ALLOW STEAM AND PRESSURE

TO BE RELEASED WHILE

GUARDING AGAINST EXCESS

SPLASHING. WHEN BLENDING HOT

INGREDIENTS, DO NOT PLACE

HANDS NEAR THE VENTED LID CAP

AS HOT STEAM AND SPLATTERS

RELEASED CAN RESULT IN

SCALDING OR BURN INJURIES.

FOR RECIPES THAT REQUIRE

CERTAIN INGREDIENTS TO

BE INCORPORATED DURING

BLENDING, CAREFULLY REMOVE

THE VENTED LID CAP AND POUR

OR DROP INGREDIENTS INTO

THE BLENDING MIXTURE. BE

ESPECIALLY MINDFUL WHEN

ADDING INGREDIENTS TO HOT

INGREDIENTS AND LIQUIDS, AS

ESCAPING STEAM OR SPLATTERS

MAY PRESENT A RISK OF INJURY.

DO NOT EXCEED THE MAX LINE

WHEN INSERTING ADDITIONAL

INGREDIENTS. ALWAYS REINSTALL

THE VENTED LID CAP AFTER

ADDING THE INGREDIENTS.

ALWAYS START THE BLENDING

CYCLE ON THE LOW SETTING,

INCREASING SPEED ONCE THE

INGREDIENTS ARE INTEGRATED

AND THE MIXTURE IS LEVEL

(NO SPLASHING).

WARNING! NEVER USE A

NUTRIBULLET

CUP ACCESSORY,

TO BLEND HOT, WARM, OR

CARBONATED INGREDIENTS.

DOING SO MAY PRESSURIZE AND

EXPEL THE HOT CONTENTS UPON

OPENING RESULTING IN SERIOUS

BODILY INJURY OR DAMAGE.

Blending with

the Pitcher.

1 Place the Motor Base on a

clean, dry, level surface, such

as a counter or table.

2 Place the Pitcher on a

clean, dry, level surface and

add the ingredients to the

Pitcher, making sure they

do not exceed either the

lower LIQUID MAX (56oz or

7 Cups) or higher solid MAX

(64oz or 8 Cups) line.

PLEASE KEEP THESE IMPORTANT

SAFEGUARDS IN MIND WHEN

USING THE APPLIANCE:

4 Place the Pitcher onto the

Motor Base with the handle

pointed directly toward

the Control Panel. Twist

clockwise to lock the Pitcher

into place. (You should hear

a “click” when it’s locked.)

NOTE: If you are left-handed,

place the handle facing toward

the center of the blending Control

Panel and twist clockwise.

Place the motor base

Place the pitcher lid

Place the pitcher

Place the pitcher lid

3 Mount the Pitcher Lid

with Vented Lid Cap onto

the Pitcher with the spout

opposite the handle. The

Pitcher Lid with Vented

Lid Cap will snap into

place when secured onto

the Pitcher.

1918

7 Press the + or - buttons

to increase or decrease

blending speeds. Press

the Solid Circle to start a

blending cycle. Press the

Dotted Circle for pulse

blending. Press AUTO for

an automated, high-speed

blending cycle.

NOTE: You can press the Solid

Circle or AUTO buttons again to

pause or stop a blending cycle.

8 Once the blending cycle is

complete, wait for the blades

to stop turning.

9 Press the Power Button to

turn o the blender.

10 Twist the Pitcher

counterclockwise to unlock,

then lift it o the Motor Base.

Pour and enjoy!

6 Press the Power Button to

turn on the Blender.

You will see the Control

Panel illuminate.

5 Plug the Motor Base’s

power cord into an

electrical outlet.

Plug in the motor base

Press the Control Panel

Remove the pitcher

Wait for the blades to stop turning

Press the power button

Wait for the blades to stop turning

2120

1 Place the Motor Base on a

clean, dry, level surface, such

as a counter or table.

2 Add ingredients to the

nutribullet

Cup.

WARNING! Do not overﬁll!

To avoid leakage, do not

add ingredients beyond

the MAX line!

3 Twist the Extractor

Blade onto the Cup so it

is tightly sealed.

4 Turn the Cup upside down

and place it onto the Motor

Base, gently turning the

Cup clockwise to lock into

the Motor Base.

5 Plug the Motor Base’s

power cord into an

electrical outlet.

6 Press the Power Button to

turn on the Blender.

You will see the Control

Panel illuminate.

WARNING! NEVER BLEND

HOT OR WARM INGREDIENTS

INSIDE THE NUTRIBULLET

CUP!

USING THE CUP TO BLEND HOT

OR WARM INGREDIENTS MAY

CAUSE THE CUP TO SEPARATE,

EXPELLING HOT CONTENTS OR

EXPOSING THE BLADE, BOTH OF

WHICH CAN CAUSE SEVERE BODILY

INJURY AND PROPERTY DAMAGE.

USE ONLY THE VENTED

PITCHER TO BLEND HOT OR

WARM INGREDIENTS.

DO NOT BLEND FOR LONGER

THAN ONE MINUTE.

DO NOT OVERFILL WITH ICE.

ALWAYS USE SUFFICIENT LIQUIDS.

Place the motor base

Place the cup on the motor base

Plug in the motor base

Press the power button

Blending with

the Cup.

2322

Care & maintenance.

9 Press the Power Button to

turn o the blender.

10 Unlock the assembly by

gently twisting the Cup

counterclockwise. You will

hear a click.

WARNING! DO NOT blend

hot or warm ingredients.

WARNING! DO NOT blend

for longer than one minute.

Press the Control Panel

Press the power button

Untwist the cup from the motor base

Here’s how to clean

your nutribullet

7 Press the + or - buttons

to increase or decrease

blending speeds. Press

the Solid Circle to start

blending cycle. Press the

Dotted Circle for pulse

blending. Press AUTO for

an automated, high-speed

blending cycle.

NOTE: You can press the Solid

Circle or AUTO buttons again to

pause or stop a blending cycle.

8 Once the blending cycle is

complete, wait for the blades

to stop turning.

1 ALWAYS POWER OFF THE

UNIT and UNPLUG the

Motor Base from the power

outlet when it is not in use.

Only attempt to handle the

appliance once all parts

have stopped moving! This

includes during assembly

and disassembly, while

changing accessories

during cleaning, and any

time you leave the machine

unattended.

2 Detach the nutribullet

Pitcher or Cup from the

Motor Base.

3 Clean the individual

components (Motor Base,

Pitcher and Cup) as

recommended in the

following pages.

Plug in the motor base

Remove the pitcher

Plug in the motor base

Wait for the blades to stop turning

2524

EXTRACTOR BLADE:

WARNING! Blades are sharp!

Handle the Extractor Blade

with care when cleaning!

• Clean blades immediately

after each use. For stubborn

buildup, use a small brush

or sponge to dislodge. After

washing, dry the Extractor

Blade completely.

• Do not remove any

components of the Extractor

Blade; this can result in

permanent damage to the

Blade, resulting in leakage

when blending. If, over time,

the Extractor Blade becomes

loose or damaged, you may

order a new Extractor Blade

by contacting Customer

Service at 1 (800) 523-5993.

• Periodically inspect your

Extractor Blade. If the blades

do not rotate freely or are

damaged, immediately

discontinue use and contact

Customer Service. For

optimal performance, we

recommend replacing the

Blade every 6 months, or as

needed, depending on use.

WARNING! Never leave the

Extractor Blade exposed

when storing. Always attach

the Extractor Blade to the

Pitcher for proper storage.

NUTRIBULLET

PITCHER:

WARNING! Blades are sharp!

Use caution when cleaning

the Pitcher.

• The Pitcher is dishwasher-

safe. We recommend rinsing

and brieﬂy scrubbing it with

a dish brush to remove any

remaining debris before

placing it in the dishwasher.

NEVER use the sanitize cycle

to wash the Pitcher — heat

this high can warp the plastic.

• If preferred, hand-wash the

Pitcher with soap and water.

Stuck-on ingredients might

require extra scrubbing with

a dish brush or sponge.

• Regularly check the

structure of the Pitcher and

twisting threads for cracking,

crazing, or breakage.

If damaged, replace

immediately to prevent

the risk of personal injury.

WARNING! NEVER USE A

PITCHER THAT DOES NOT

PROPERLY ALIGN WITH

THE BLADE. Doing so may

cause the Pitcher and Motor

Base to separate, exposing

the blade assembly and

potentially causing severe

personal injury.

NUTRIBULLET

CUPS

& TO-GO LIDS:

These items are TOP RACK

dishwasher-safe. We

recommend rinsing and brieﬂy

scrubbing them with a dish

brush to remove any remaining

debris before placing them in

the dishwasher. NEVER use

the sanitize cycle to wash the

Cups — heat this high can warp

the plastic.

TAMPER:

• Always hand-wash the

Tamper with soap and water.

Stuck-on ingredients might

require extra scrubbing with

a dish brush or sponge.

STUBBORN CLEANUP:

If ingredients dry inside the

nutribullet

Cup or Pitcher,

ﬁll your vessel with room-

temperature water (70°F/21°C)

to the liquid MAX line and add

1-2 drops of dish soap. For

Cups, twist on the Extractor

Blade and place the Cup on the

Motor Base. Blend on LOW for

20-30 seconds. For the Pitcher,

attach the Pitcher Lid with the

Vented Lid Cap inserted, and

place the Pitcher on the Motor

Base. Blend on LOW for 20-30

seconds; this should loosen

debris enough to scrub away

with soap and water.

STORING:

Store the nutribullet

Pitcher

upright with the Pitcher Lid

secured on top. Do not place

anything on top of the Pitcher

Lid. Store the remaining pieces

in a safe place where they will

not be damaged and won’t

cause harm.

For replacement

parts.

To order additional parts

and accessories, please visit

our website at nutribullet.com/

shop/accessories or feel free to

contact Customer Service at

1 (800) 523-5993.

2726

nutribullet SmartSense

™

Blender Combo

one-year

limited warranty.

LIMITED WARRANTY

FOR NUTRIBULLET

nutribullet’s limited warranty

obligations are conﬁned to

the terms set forth below:

nutribullet, LLC (“nutribullet”)

warrants this nutribullet

against defects in materials

and workmanship for one year

from the date of actual delivery

of the product.

This limited warranty is valid

only in the country in which

the product is purchased and

comes with the product at

no extra charge. However,

shipping and processing fees

will be incurred for returns,

replacements, and/or refunds.

If a defect exists, and

nutribullet

is obligated under

this limited warranty, at its

option nutribullet

will (1) repair

the product at no charge,

using new or refurbished

replacement parts, (2)

exchange the product with a

product that is new or

that has been manufactured

from new or serviceable used

parts and is at least functionally

equivalent to the original

product, or (3) refund the

purchase price of the product.

A replacement product

assumes the remaining

warranty of the original

product. A repaired product

has a one-year warranty from

date of the actual delivery of

the repaired product. When a

product or part is exchanged,

any replacement item becomes

your property and the replaced

item becomes nutribullet’s

property. When a refund is

given, your product becomes

nutribullet’s property.

OBTAINING WARRANTY

SERVICE

For limited warranty

service, call our Customer

Service department at

1 (800) 523-5993 or contact

us via email from our website

at nutribullet.com, click the

submit the customer contact

form, and we will be glad to

help you. When you contact our

Customer Service department

you will be asked for your

name, address, and telephone

number, and to provide proof of

the original purchase (receipt)

detailing a description of the

product(s), purchase date or

date of actual delivery of the

product, and the appropriate

nutribullet

serial number(s).

Before you send your product

for limited warranty service,

please make sure to keep a

copy of all relevant documents

for your ﬁles (receipt, etc.). It

is always recommended to

purchase product insurance

and tracking services when

sending your product for

service. Remember, shipping

and processing fees will

be incurred and are not

covered by the one-year

limited warranty.

EXCLUSIONS & LIMITATIONS

This nutribullet

One-Year

Limited Warranty applies

only to nutribullet

products

distributed by or for nutribullet

that can be identiﬁed by the

“nutribullet” trademark, trade

name, logo, and bar code.

nutribullet SmartSense™

Blender Combo One-Year

Limited Warranty does not

apply to any other products

that may appear to be

authentic but were

not distributed/sold by

nutribullet, LLC.

Normal wear and tear is

not covered by this limited

warranty. This limited warranty

applies to consumer use only

and is void when the product

is used in a commercial or

institutional setting.

This limited warranty extends

only to the original consumer

purchaser and is not

transferable. In addition,

proof of purchase must be

demonstrated. Repair or

replacement of the product

(or, if repair or replacement

is not feasible, a refund of the

purchase price) is the exclusive

remedy of the consumer

under this limited warranty.

nutribullet, LLC shall not be

liable for any incidental or

consequential damages for

breach of this limited warranty

or any implied warranty on

this product.

This limited warranty gives

you speciﬁc legal rights, and

you may also have other rights

which vary from state to state.

nutribullet

is not liable for

any damage to products not

covered by this warranty (e.g.,

cups, books, User Guide). This

limited warranty does not

apply: (a) to damage caused

by accident, abuse, misuse,

or misapplication; (b) to

2928

damage caused by improper

maintenance (including

unauthorized parts service);

has been modiﬁed in any way;

(d) if any nutribullet

serial

number or trademark has been

removed or defaced; and/or (e)

if the product has been used

with an adapter/converter.

THIS LIMITED WARRANTY

AND THE REMEDIES SET

FORTH ABOVE ARE EXCLUSIVE

AND INSTEAD OF ALL OTHER

WARRANTIES, REMEDIES,

AND CONDITIONS, WHETHER

ORAL OR WRITTEN,

EXPRESS OR IMPLIED.

NUTRIBULLET

SPECIFICALLY

DISCLAIMS ANY AND ALL

IMPLIED WARRANTIES,

INCLUDING, WITHOUT

LIMITATION, WARRANTIES

OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR

PURPOSE. IF NUTRIBULLET

CANNOT LAWFULLY DISCLAIM

IMPLIED WARRANTIES UNDER

THIS LIMITED WARRANTY,

ALL SUCH WARRANTIES,

INCLUDING WARRANTIES

OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR

PURPOSE ARE LIMITED IN

DURATION TO THE DURATION

OF THIS LIMITED WARRANTY.

No nutribullet

reseller, agent,

or employee is authorized to

make any modiﬁcation to

this warranty.

NUTRIBULLET

IS NOT

RESPONSIBLE FOR DIRECT,

SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES

RESULTING FROM ANY

BREACH OF WARRANTY

OR CONDITION, OR UNDER

ANY OTHER LEGAL THEORY,

INCLUDING BUT NOT LIMITED

TO LOST PROFITS, DOWNTIME,

GOODWILL, DAMAGE TO

OR REPLACEMENT OF

EQUIPMENT AND PROPERTY.

NUTRIBULLET

SPECIFICALLY

DOES NOT REPRESENT THAT

IT WILL BE ABLE TO REPAIR

ANY PRODUCT UNDER THIS

LIMITED WARRANTY.

Some states and provinces

do not allow the exclusion

or limitation of incidental or

consequential damages or

exclusions or limitations on the

duration of implied warranties

or conditions, so the above

limitations or exclusions

may not apply to you. This

warranty gives you speciﬁc

legal rights, and you may also

have other rights that vary by

state or province.

Product registration.

How to ﬁnd the serial number

under the Motor Base.

Please visit nutribullet.com/

shop/accessories or call

1 (800) 523-5993 to register

your new nutribullet

. You will

be asked to enter the serial

number of your product, along

with the purchase date or

date of actual delivery of the

product and place of purchase.

The information submitted is

for product registration only.

Failure to complete the product

registration does not diminish

your warranty rights.

The registration will enable us to

contact you in the unlikely event

of a product safety notiﬁcation.

By registering your product,

you acknowledge to have read

and understood the instructions

for use and warnings set forth in

the accompanying instructions.

nutribullet

and the nutribullet

logo are trademarks of CapBran Holdings,

LLC registered in the U.S.A. and worldwide.

Illustrations may dier from the actual product. We are constantly striving

to improve our products, therefore the speciﬁcations contained herein

are subject to change without notice.

240702_NBF50700

NutriBullet NBF50700 SmartSense Blender – 5-speed, full-sized blender

Product's Documents

User Manual

Specifications

NutriBullet NBF50700 Questions and Answers