Smart Fitness Scale
User Manual
Thank you for purchasing the
Smart Fitness Scale by Etekcity.
Questions or Concerns?
Mon–Fri, 9:00 am–5:00 pm PST/PDT
support@etekcity.com • 1-855-686-3835
If you have any questions or concerns, please reach out to our
helpful Customer Support Team at support@etekcity.com.
We hope you enjoy your new scale!
3
Table of Contents Specications
Model
EFS-A591S-KUST
Weight
Capacity
400 lb / 180 kg / 28 st
Increments
0.1 lb / 0.05 kg
Weight Units
lb / kg / st
Platform
Tempered Glass
Battery
500mAh Li-ion Battery
Input
5.0V 500mA (USB
Type-C Charging)
Dimensions
11.8 x 11.8 x 1.2 in /
30 x 30 x 3 cm
Specications
Safety Information
Function Diagram
Display Diagram
VeSync App Setup
Creating a User
Using the Smart Scale
Features
Maintenance
Troubleshooting
Limited Warranty Information
Customer Support
3
4
5
6
7
8
9
10
11
12
17
19
Please read and follow all instructions and safety guidelines in this manual.
READ AND SAVE THESE
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Safety Information
MEDICAL
GENERAL USE
• Check the scale before using. Do not
use the scale if it is damaged in any
way.
• Do not strike or bang on the scale.
• Do not use the scale if there is a crack
on the glass. While tempered glass
is stronger and fractures more safely
than ordinary glass, it may shatter
unexpectedly after developing a slight
crack. If you see a crack, contact
Customer Support (see page 19).
• The glass platform is slippery when
wet. Always make sure the platform
and your feet are dry before stepping
• This scale should not be used to
diagnose or treat any medical
condition.
• Scale data should not be used as a
substitute for medical advice from a
healthcare professional.
• This scale uses a harmless electrical
current to measure body fat. Consult
a healthcare professional before using
the smart scale if you use electronic
medical equipment such as a
pacemaker.
on for measurement.
• Place the scale on a hard, at surface
to avoid tipping.
• To weigh safely and accurately, stand
with your feet shoulder-width apart
while on the scale.
• Do not stand on the edge of the scale
or jump on the scale.
• Avoid standing on the scale for a long
period of time, or when not measuring
yourself.
• Do not overload the scale. Maximum
weight capacity is 400 lb / 180 kg /
28 st.
• Keep the scale in a cool area with low
humidity.
• Keep the scale away from heat
sources, such as ovens or heaters.
Avoid temperature uctuations.
• Store the scale in a horizontal position,
not a vertical position.
• This scale is not to be used by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Handle with care. Not for commercial
use. Household use only.
E
D
5
Function Diagram
A. Weighing Platform
B. Display
C. Non-Conductive Areas
D. Reset Button
E. USB-C Charging Port
F. Anti-Skid Padding
A
F
B
C
Display Diagram
A. Bluetooth
®
Icon
B. Wi-Fi
®
Icon
C. Zero-Current Mode
D. Baby Mode
E. Battery Indicator
F. Weight Unit
G. Weight Measurement
H. User Prole
A B C D E
F
G
H
7
1. To download the VeSync app, scan
the QR code or search “VeSync” in
the Apple App Store
®
or Google Play
Store.
VeSync App Setup
Note:
• The VeSync app is continually being
improved and may change over time. If
there are any dierences, follow the in-app
instructions.
• Requires device to run app, Wi-Fi
®
or mobile
data, and iOS version 12 or Android version
6 (or above). Standard data and messaging
rates may apply. Registration is required.
Wi-Fi
®
Connection:
• To disconnect Wi-Fi, use a safety pin
or paper clip to press the Reset Button
near the charging socket. This will
restore the scale’s default settings and
disconnect it from the VeSync app.
• To reconnect, please follow the
instructions in the VeSync app for
adding a device.
Note: For Android™ users, choose “Allow” to
use VeSync.
Note: You must create your own VeSync
account to use third-party services and
products. These will not work with a guest
account. With a VeSync account, you
can also allow your family and friends to
control your smart scale.
Note: Your phone must have
Location turned on while your
phone is connecting to your smart
scale. This is required to establish the
Bluetooth
®
connection. You can turn
Location o after your smart scale is
finished connecting to the VeSync app.
2. Open the VeSync app. Log In or
Sign Up.
3. Follow the in-app instructions to set
up your smart scale.
Creating a User
Note: If you don’t identify with the
available gender options (or are unsure),
pick the option that you think best
physically matches you. This choice is
used for physical measurements, such as
body fat percentages.
Note: Users sharing a VeSync account
will be able to view each other’s metrics
recorded by the smart scale.
Important: Entering inaccurate information
will make the scale’s measurements less
accurate.
If you are a new user, you will need to enter
physical information before weighing
yourself for the rst time so the scale
can calculate your body metrics. Follow
the in-app instructions to create a user
prole.
The scale only displays up to 10 user
avatars at a time. To select which users
you want displayed, you can manage
user proles in Device settings in the
app.
MULTIPLE USERS
CHANGING YOUR USER
AVATAR
WEIGHING CHILDREN
Multiple Users With Separate VeSync
Accounts
Users can create or log in to their own
VeSync accounts and pair the smart
scale to their separate accounts.
Multiple Users With a Shared VeSync
Account
Users who create or log in to a VeSync
account can create multiple user proles
within their account. All users can log
in to the same account (on their own
smartphones) without requiring the other
users to log out.
Note:
• Only 5 VeSync accounts can pair
with the smart scale at a time. If the
maximum number of accounts is
reached, an in-app alert will ask the
user to disconnect one of the user
accounts to continue the pairing
process with the current user’s account.
• Users with their own VeSync accounts
will not be able to view other users’
metrics recorded by the scale.
1. Tap “Device settings” in the VeSync app
2. Then tap “Members”
3. Select the prole image you want to
change
4. Change avatar in “Edit Member”
• Children under 3 years old cannot
measure body metrics other than
weight.
• Minors will need a guardian’s consent
to create a VeSync account.
9
Using the Smart Scale
Note: You can customize the scale’s
display by selecting Customize Screens in
the Device Settings menu.
PRECISYNC™ TECHNOLOGY
WEIGHING MODES
HOW PRECISYNC™ WORKS
The smart tness scale uses PreciSync™
auto-recognition technology to select
an existing user prole based on weight,
an ideal feature for a household with
multiple users. To use this function, you
must rst connect the scale to your VeSync
account and sync user information with
the scale.
• Zero-Current Mode: Turns o the
scale’s electrical current and only
provides measurements for weight
and BMI. This mode can be helpful for
users who are pregnant or who have
implanted medical devices, such as
pacemakers.
• Baby Mode: To weigh your baby or
pet, tap
and follow the in-app
instructions for weighing. Baby Mode
will not measure other body metrics
and will only measure weight and BMI.
Note:
• PreciSync works with or without a
Bluetooth connection.
• PreciSync will automatically turn on
when there is more than one user
profile connected to the scale in the
VeSync app.
Note:
• Placing the scale on soft surfaces
such as shaggy carpet may cause
inaccurate measurements or tipping.
If necessary, this scale can be used on
low-pile carpet with a fiber length of
0.4 inches / 10 mm or less.
• If the scale cannot be turned on or the
battery is low, it needs to be charged.
Charging the scale may take up to 3
hours.
1. For the best results, place the scale
on a hard, at surface.
2. Step on the scale, then step o. Wait
for the screen to display “
” before
using.
3. Place dry, bare feet on the scale’s
conductive areas. Continue standing
on the scale, then step o the scale
when the display shows “BYE”. If
your smart scale is connected to the
VeSync app, additional metrics that
are not selected for display on the
scale will show in the app.
• The scale will compare the user’s
current weight with all user proles
synced to the scale.
• If only one user prole is within 6.5
lb of the current weight, it will be
automatically stored under that user’s
prole.
• If multiple user proles are within 6.5 lb
of the current weight, the display will
prompt the user to tap their right foot
to select a user prole.
• If no user is within 6.5 lb of the
current weight, the weight will be
automatically stored as a Guest Prole
without prompting the user to select
a prole.
Features
• Weather: Scale shows current weather
conditions on the display.
Use the VeSync app to customize your
scale with dierent features, such as:
SWITCHING UNITS
To switch between pounds (lb), kilograms
(kg), and stone (st), open the VeSync app
and select the weight unit in the Device
Settings menu.
11
Maintenance
CLEARING THE SMART SCALE
CLEANING THE SMART SCALE
CHARGING THE BATTERIES
If the scale has been moved or ipped
upside down, it must be cleared to ensure
accurate results.
The display will show
(Low Battery)
when the batteries need to be charged.
1. Place the scale on a hard, at surface.
2. Step on the scale until digits appear
on the display, then step o.
[Figure 2.1]
1. Insert the USB charging cable into the
USB charging socket.
2. Plug the USB charging cable into
a DC 5V adapter and plug into an
outlet. You can also plug the cable
into a powered USB outlet.
3. The bars of the
will continuously
ll as the scale charges. When
completely charged, the will be
lled.
3. Wait until the scale displays “
”.
[Figure 2.2]
Figure 2.1
Figure 2.2
• Use a slightly damp cloth to clean
the surface of the scale, followed by
a soft, dry cloth to wipe away any
remaining moisture.
• Do not use chemical or abrasive
cleaning agents to clean the scale.
Note: Charging the smart scale with the
provided USB-C cable will give the best
results.
Troubleshooting
The scale doesn’t turn on.
If the scale cannot be turned on or the battery is low, it needs to be charged. Charging the
scale may take up to 3 hours.
When I stand on the scale, it doesn’t respond.
• The scale may need to be restarted. Use a safety pin or paper clip to press the “Reset”
button near the charging socket to reset the scale.
If the smart scale still cannot connect via Bluetooth, please try the following:
• Restart Bluetooth or restart your smartphone.
• Use a safety pin or paper clip to press the “Reset” button near the charging socket.
• Tap the “Disconnected” button on the top of the weigh-in screen in the VeSync app to
view troubleshooting tips.
The smart scale doesn’t connect to Wi-Fi.
• Make sure the scale is connected to the VeSync app via Bluetooth.
• Step on the scale to turn it on.
• Open the VeSync app and go to device settings
. Select “Wi-Fi Connection”.
• Follow the on-screen instructions to connect. Keep the scale on while connecting.
• Make sure your smartphone is connected to Wi-Fi.
• Your scale might be too far from your router. Try moving the scale within 164 ft / 50 m of
your router.
• Make sure you’ve typed in your password correctly, checking for capitalization and
spacing.
The smart scale’s Bluetooth doesn’t connect to the VeSync app.
• Make sure your phone’s operating system is running on iOS
®
12.0+ or Android 6.0+.
• Close and relaunch the VeSync app. Make sure you’re using the latest version.
• Make sure your phone has Bluetooth turned on. For Android users, make sure your
Location is turned on as well.
• Make sure your scale and phone are within 30 ft / 10 m of each other.
• Make sure the scale is not currently connected to any other phone or app.
• The scale should only be connected to your phone via the VeSync app. Do not connect
the scale to your phone’s Bluetooth settings.
• Make sure any VPN apps are turned o.
Information ashes on the display and then disappears.
• The batteries are low and may need to be replaced.
Note: The scale only supports 2.4GHz networks. If you have a 5GHz network, chances are you may
have a 2.4GHz one as well (i.e., a dual-band router).
13
• If you enter your Wi-Fi SSID manually, make sure all the letters and punctuation marks are
correct.
• Make sure you have turned o MAC address ltering and do not have active rewalls on
the router. Check whether the router DHCP is normally enabled.
• Make sure the DHCP in your router settings allows the devices with special characters to
be connected.
• Make sure you don’t have too many devices connected to your router (10 or fewer is best).
• Restart the router and try connecting the scale with the VeSync app (see page 7).
The scale readings seem unstable or inaccurate.
• Make sure the scale is on a hard, at surface.
• The scale may need to be restarted. Use a safety pin or paper clip to press the “Reset”
button near the charging socket.
• The scale may need to be cleared. Follow instructions to clear the scale (see page 11).
My scale will only measure my weight, not other biometrics.
• If you’re wearing shoes or socks, the scale cannot measure biometrics such as body fat.
Step on the scale with bare feet.
[Figure 3.1]
• Make sure to place your feet on the scale’s conductive areas.
[Figure 3.2]
If your problem is not listed or you still need help, please contact Customer Support (see
page 19).
• Make sure the scale is connected to the VeSync app (see VeSync App Setup, page 7).
• Check if Zero-Current Mode is on. If it is, the scale will only provide measurements for
weight and BMI, not other biometrics.
Figure 3.1 Figure 3.2
Attributions
Fitbit is a registered trademark(s) of Fitbit, Inc. and/or its aliates in the United States and
other countries.
Apple App Store and Apple Health are trademarks of Apple Inc.
Google, Android, and Google Play are trademarks of Google LLC.
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its aliates.
iOS is a registered trademark of Cisco Systems, Inc. and/or its aliates in the United States
and certain other countries.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Arovast Corporation is under license. Other trademarks and
trade names are those of their respective owners.
15
Federal Communication Commission Interference
Statement – Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
FCC Caution: Any changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC SAR Statement
FCC SDOC SUPPLIER’S DECLARATION OF
CONFORMITY
This equipment has to subject to FCC SAR (Specic Absorption Rate) exposure test, this
equipment is designed to meet the requirements for exposure to radio waves established
by the FCC. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tis-
sue. The highest SAR value reported under this standard during product certication for use
when properly worn on the body, with no separation. To meet RF exposure guidelines and
reduce exposure to RF energy during the operation, this equipment should be positioned at
least this distance away from the body.
Etekcity Corporation hereby declares that this equipment is in compliance with the FCC
Part 15 Subpart B. The declaration of conformity may be consulted in the support section of
our website, accessible from www.etekcity.com
17
Limited Warranty Information
Etekcity Limited Product Warranty
Register your products at https://warranty.etekcity.
com/warranty to stay up to date with important
product information such as product updates,
limited warranties, usage and maintenance
recommendations, and notications concerning
safety warnings or product recalls. Registration is not
required to claim your limited warranty.
Two (2) Year Limited Consumer Product Warranty
Etekcity Corporation (“Etekcity”) warrants that the
product shall be free from defects in material and
workmanship for a period of 2 years from the date of
original purchase (“Limited Warranty Period”), provided
the product was used in accordance with its use and
care instructions (e.g. in the intended environment and
under normal circumstances).
Your Limited Warranty Benefits
During the Limited Warranty Period and subject to
this limited Warranty Policy, Etekcity will, in its sole
and exclusive discretion, either (i) refund the purchase
price if the purchase was made directly from the
online Etekcity store, (ii) repair any defects in material
or workmanship, (iii) replace the product with another
product of equal or greater value, or (iv) provide store
credit in the amount of the purchase price.
Who Is Covered?
This limited warranty extends only to the original
consumer purchaser of the product and is not
transferable to any subsequent owner of the product,
regardless of whether the product transferred
ownership during the specied term of the limited
warranty. The original consumer purchaser must
provide verication of the defect or malfunction and
proof of the date of purchase to claim the Limited
Warranty Benets.
Be Aware of Unauthorized Dealers or Sellers
This limited warranty does not extend to products
purchased from unauthorized dealers or sellers.
Etekcity’s limited warranty only extends to products
purchased from authorized dealers or sellers that
are subject to Etekcity’s quality controls and have
agreed to follow its quality controls. Please be aware,
products purchased from an unauthorized website or
Product Name Smart Fitness Scale
Model EFS-A591S-KUST
For your own reference, we strongly recommend
that you record your order ID and date of
purchase.
Order ID
Date of Purchase
dealer may be counterfeit, used, defective, or may not
be designed for use in your country. You can protect
yourself and your products by making sure you only
purchase from Etekcity or its authorized dealers.
If you have any questions about a specic seller, or if
you think you may have purchased your product from
an unauthorized seller, please contact our Customer
Support via support@etekcity.com.
What’s Not Covered?
• Normal wear and tear, including parts that might
wear out over time (e.g. batteries, lters, cleaning
brush, essential oil pads, etc.).
• If the proof-of-purchase has been altered in any
way or is made illegible.
• If the model number, serial number or production
date code on the product has been altered,
removed or made illegible.
• If the product has been modied from its original
condition.
• If the product has not been used in accordance
with directions and instructions in the user manual.
• Damages caused by connecting peripherals,
additional equipment or accessories other than
those recommended in the user manual.
• Damages or defects caused by accident, abuse,
misuse, or improper or inadequate maintenance.
• Damages or defects caused by service or repair of
the product performed by an unauthorized service
provider or by anyone other than Etekcity.
• Damages or defects occurring during commercial
use, rental use, or any use for which the product is
not intended.
• If the unit has been damaged, including but not
limited to damage by animals, lightning, abnormal
voltage, re, natural disaster, transportation,
dishwasher, or water (unless the user manual
expressly states that the product is dishwasher
safe).
• Incidental and consequential damages.
• Damages or defects exceeding the cost of the
product.
Claiming Your Limited Warranty Service in 5 Simple
Steps:
1. Make sure your product is within the specied
limited warranty period.
2. Make sure you have a copy of the invoice and
order ID or proof-of-purchase.
3. Make sure you have your product. DO NOT
dispose of your product before contacting us.
4. Contact our Customer Support team via
support@etekcity.com.
5. Once our Customer Support team has approved
your request, please return the product with a
copy of the invoice and order ID.
Sole and Exclusive Remedy
THE FOREGOING LIMITED WARRANTY CONSTITUTES
ETEKCITY CORPORATION’S EXCLUSIVE LIABILITY,
AND YOUR SOLE AND EXCLUSIVE REMEDY, FOR
ANY BREACH OF ANY WARRANTY OR OTHER
NONCONFORMITY OF THE PRODUCT COVERED BY
THIS LIMITED PRODUCT WARRANTY STATEMENT. THIS
LIMITED WARRANTY IS EXCLUSIVE, AND IN LIEU OF
ALL OTHER WARRANTIES. NO EMPLOYEE OF ETEKCITY
CORPORATION OR ANY OTHER PARTY IS AUTHORIZED
TO MAKE ANY WARRANTY IN ADDITION TO THE
LIMITED WARRANTY IN THIS LIMITED PRODUCT
WARRANTY STATEMENT.
Disclaimer of Limited Warranties
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE
LAW, EXCEPT AS WARRANTED IN THIS LIMITED
PRODUCT WARRANTY POLICY, ETEKCITY
CORPORATION PROVIDES THE PRODUCTS YOU
PURCHASE FROM ETEKCITY CORPORATION “AS IS”
AND ETEKCITY CORPORATION HEREBY DISCLAIMS
ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS
OR IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING
BUT NOT LIMITED TO ANY WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS
FOR PARTICULAR PURPOSE.
Limitations of Liability
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE
LAW, IN NO EVENT WILL ETEKCITY CORPORATION,
ITS AFFILIATES, OR THEIR LICENSORS, SERVICE
PROVIDERS, EMPLOYEES, AGENTS, OFFICERS,
OR DIRECTORS BE LIABLE FOR: (A) DAMAGES OF
ANY KIND ARISING OUT OF OR IN CONNECTION
WITH PRODUCTS PURCHASED FROM ETEKCITY
CORPORATION IN EXCESS OF THE PURCHASE PRICE
PAID BY THE PURCHASER FOR SUCH PRODUCTS, OR
(B) INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL,
OR PUNITIVE DAMAGES EVEN IF ETEKCITY
CORPORATION OR ONE OF ITS SUPPLIERS HAS BEEN
ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF
SUCH DAMAGES. AND REGARDLESS OF WHETHER
CAUSED BY TORT (INCLUDING NEGLIGENCE), BREACH
OF CONTRACT, OR OTHERWISE. OUR LIABILITY SHALL
UNDER NO CIRCUMSTANCES EXCEED THE ACTUAL
AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT,
NOR SHALL WE UNDER ANY CIRCUMSTANCES BE
LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL,
SPECIAL OR PUNITIVE DAMAGES OR LOSSES,
WHETHER DIRECT OR INDIRECT. EXCEPT AS COVERED
BY THIS LIMITED PRODUCT WARRANTY STATEMENT,
ETEKCITY CORPORATION SHALL NOT BE LIABLE
FOR COSTS ASSOCIATED WITH THE REPLACEMENT
OR REPAIR OF PRODUCTS PURCHASED FROM
IT, INCLUDING, BUT NOT LIMITED TO, LABOR,
INSTALLATION, OR OTHER COSTS INCURRED BY THE
USER AND, IN PARTICULAR, ANY COSTS RELATING TO
THE REMOVAL OR REPLACEMENT OF ANY PRODUCT.
Other Rights You May Have
SOME JURISDICTIONS DO NOT ALLOW FOR: (1)
EXCLUSION OF IMPLIED WARRANTIES; (2) LIMITATION
ON THE DURATION OF IMPLIED WARRANTIES; AND/
OR (3) EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; SO THE DISCLAIMERS
IN THIS POLICY MAY NOT APPLY TO YOU. IN THESE
JURISDICTIONS YOU HAVE ONLY THE IMPLIED
WARRANTIES THAT ARE EXPRESSLY REQUIRED TO
BE PROVIDED IN ACCORDANCE WITH APPLICABLE
LAW. THE LIMITATIONS OF WARRANTIES, LIABILITY,
AND REMEDIES APPLY TO THE MAXIMUM EXTENT
PERMITTED BY LAW.
ALTHOUGH THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER
RIGHTS IN YOUR JURISDICTION. THIS STATEMENT
OF LIMITED WARRANTY IS SUBJECT TO APPLICABLE
LAWS THAT APPLY TO YOU AND THE PRODUCT.
PLEASE REVIEW THE LAWS IN YOUR JURISDICTION TO
UNDERSTAND YOUR RIGHTS FULLY.
Changes To This Policy
We may change the availability of this limited
warranty at our discretion, but any changes will not
be retroactive.
This warranty is made by:
Etekcity Corporation
1775 Flight Way, Suite 150
Tustin, CA 92782
USA
19
Customer Support
If you have any questions or concerns
about your new product, please contact
our helpful Customer Support Team.
©2025 Etekcity Corporation. All rights reserved.
Etekcity and the Etekcity logo are trademarks or
registered trademarks of Vesync Group in the U.S.
and other countries. A more complete list of Vesync
trademarks can be found at https://www.vesync.com/
legal/intellectual-property?lang=en&protocol_id=16
Mon–Fri, 9:00 am–5:00 pm PST/PDT
*Please have your order invoice and
order ID ready before contacting
Customer Support.
Etekcity Corporation
1775 Flight Way, Suite 150
Tustin, CA 92782
USA
Email: support@etekcity.com
Toll-Free: 1-855-686-3835
SUPPORT HOURS
MF120924ET-EFS-A591S-KUST Manual EN (web)
