FLUKE 28IIEX/ETL Intrinsically Safe True RMS Digital Multimeter

User Manual for the Fluke 28IIEX/ETL Intrinsically Safe True RMS Digital Multimeter - Page 52

For 28IIEX/ETL.

PDF File Manual, 64 pages, Read Online | Download pdf file

28IIEX/ETL photo
Loading ...
Loading ...
Loading ...
28 II Ex
Users Manual
42
How to Replace the Fuses
Examine or replace the fuses in the Product as follows
(See Figure 11):
1. Turn the rotary switch to OFF and remove the test
leads from the terminals
2. Refer to step 2 in the “How to Replace the Batteries”
section above to remove the battery door.
3. Carefully lift out the fuse assembly () from the fuse
compartment.
4. Remove the 11 A fuse by carefully prying one end
loose, then lift the fuse out of its bracket ().
5. Install ONLY specified replacement fuses with the
amperage, voltage, and speed ratings shown in
Table 10. The 440-mA fuse is attached to the fuse
assembly. You must use a new fuse assembly to
replace the 440 mA fuse.
6. Install the fuse assembly into the fuse compartment.
7. Refer to steps four through six in the “How to
Replace the Batteries” section above to replace the
battery door.
Service and Parts
If the Product fails, examine the batteries and fuses.
Refer to this manual to make sure the Product is used
correctly.
Replacement parts and accessories are shown in
Table 10 and Figure 12.
To order parts and accessories, refer to the “How to
Contact Fluke” section.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...