Loading ...
Loading ...
Loading ...
28 II Ex
Users Manual
4
WX Warning
To prevent personal injury in mining
hazardous areas:
• Avoid extreme mechanical burdens. The
Product can withstand impacts with an
energy of seven joules at -20 °C.
• Do not allow the Product to come in
permanent contact with oils, hydraulic
fluid, or grease.
• Do not install the Product in a fixed
installation.
WX Warning
To prevent possible electrical shock, fire, or
personal injury in ALL areas of operation:
• Read all safety Information before you
use the Product.
• Comply with local and national safety
codes. Use personal protective
equipment (approved rubber gloves, face
protection, and flame-resistant clothes)
to prevent shock and arc blast injury
where hazardous live conductors are
exposed
• See the “EX Safety Information” section
for additional warnings on Product use
in hazardous areas.
• Use the Product only as specified, or the
protection supplied by the Product can
be compromised.
• Do not use the Product in damp or wet
environments.
• Do not exceed the Measurement
Category (CAT) rating of the lowest rated
individual component of a Product,
probe, or accessory.
• Examine the case before you use the
Product. Look for cracks or missing
plastic. Carefully look at the insulation
around the terminals.
• Do not use test leads if they are
damaged. Examine the test leads for
damaged insulation, exposed metal, or if
the wear indicator shows. Check test
lead continuity.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...