Loading ...
Loading ...
Loading ...
Note
The settings vary according to different models.
6.
Optional: You can shield certain areas from being detected in î´ªre source detection. Refer
to
Set Fire Source Shielded Region
for details.
7.
Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method
Settings
for setting linkage method.
8.
Click Save.
4.5.1 Set Fire Source Shielded Region
Steps
1.
Go to Conî´ªguration > Local , and enable Display Shield Area.
2.
Go to Conî´ªguration > Event > Smart Event > Fire Source Region Shield .
3.
Check Enable Fire Source Detection Shield.
4.
Select Drawing Mode, and draw the area you want to shield.
In FOV Select this mode if the shielded area is in the current scene.
a. Click the PTZ control buttons to î´ªnd the area you want to shield from
the î´ªre detection.
b. Click Draw Area, and drag the mouse in the live view to draw the area.
c. You can drag the corners of the red rectangle area to change its
shape and size.
d. Click Stop Drawing to î´ªnish drawing, or click Clear All to clear all of
the areas you set without saving them.
Out FOV Select this mode if the shielded area exceeds the current scene.
a. Click Draw Area, and a red cursor displays in live view.
b. Select Vertex NO. 1, and adjust the live view image by clicking the
PTZ control buttons.
c. When one corner of the shielded area is on the red cursor, click Set
Vertex.
d. Repeat steps b-c to set other three vertexes.
e. Click Stop Drawing to î´ªnish drawing, or click Clear All to clear all of
the vertexes you set.
In
Panorama
Map
Select this mode if you want to view the whole scene.
a. Click Draw Area and drag the mouse in the live video window to draw
the area.
b. Drag the corners of the red rectangle area to change its shape and
size.
c. Click Stop Drawing to î´ªnish drawing or click Clear All to clear all of
the areas you set without saving them.
d. Click to regenerate the panorama map.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
21
Loading ...
Loading ...
Loading ...