Loading ...
Loading ...
Loading ...
15.4 Export Diagnose Information
Diagnose information includes running log, system information, hardware information.
Go to
Conî´ªguration > System > Maintenance > Upgrade & Maintenance , and click
Diagnose Information to export diagnose information of the device.
15.5 Reboot
You can restart the device via browser.
Go to
Conî´ªguration > System > Maintenance > Upgrade & Maintenance , and click Reboot.
15.6 Device Auto Maintenance
Set the auto maintenance schedule and the device will automatically restart on schedule,
which helps avoid problems such as network anomaly and outage during continuous
operation, etc.
Steps
1.
Go to Conî´ªguration > System > Maintenance > Upgrade & Maintenance .
2.
Check Enable Auto Maintenance.
3.
Read the prompt information and click OK.
4.
Select the date and time when the device automatically restart.
5.
Click Save.
Note
This function is only available for Administrator.
15.7 Restore and Default
Restore and Default helps restore the device parameters to the default settings.
Steps
1.
Go to Conî´ªguration > System > Maintenance > Upgrade & Maintenance .
2.
Click Restore or Default according to your needs.
Restore Reset device parameters, except user information, IP parameters and video
format to the default settings.
Default Reset all the parameters to the factory default.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
107
Loading ...
Loading ...
Loading ...