Loading ...
Loading ...
Loading ...
14.7 Access to Device via PPPoE Dial Up Connection
This device supports the PPPoE auto dial-up function. The device gets a public IP address
by ADSL dial-up after the device is connected to a modem. You need to conî´ªgure the
PPPoE parameters of the device.
Steps
1.
Go to Conî´ªguration > Network > Basic Settings > PPPoE .
2.
Check Enable PPPoE.
3.
Set the PPPoE parameters.
Dynamic IP
After successful dial-up, the dynamic IP address of the WAN is displayed.
User Name
User name for dial-up network access.
Password
Password for dial-up network access.
Conî´ªrm
Input your dial-up password again.
4.
Click Save.
5.
Access the device.
By Browsers Enter the WAN dynamic IP address in the browser address bar to
access the device.
By Client
Software
Add the WAN dynamic IP address to the client software. Refer to
the client manual for details.
Note
The obtained IP address is dynamically assigned via PPPoE, so the IP address always
changes after restarting the camera. To solve the inconvenience of the dynamic IP, you
need to get a domain name from the DDNS provider (e.g., DynDns.com). Refer to
Access
to Device via Domain Name
for detail information.
14.8 Accessing via Mobile Client
Hik-Connect is an application for mobile devices. Using the App, you can view live image,
receive alarm notiî´ªcation and so on.
Note
Hik-Connect service should be supported by the camera.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
101
Loading ...
Loading ...
Loading ...