Loading ...
Loading ...
Loading ...
6
7
Transportation
WARNING
Use two people whenever it
is necessary to lift or carry
the machine. Machine is heavy. Lift with
legs, not back.
Keep tires properly infl ated at all times to main-
tain control and stability.
Do not use cart to transport other loads or add
additional product. For use with recommended
cable size/lengths only.
Always unarm the machine before transporting.
Ensure the foot pedal cord is properly wrapped
and the pedal is stored before transporting.
Always clear the area of obstructions before
transporting.
To roll cart from place to place, grasp the transport
handle and tilt the machine back onto the tires. Push,
don't pull, the machine.
Always use a two person lift when necessary. To lift,
grasp the transport handle and tilt the machine back
onto the tires. Have a second person grasp the lower
lift handle. Always maintain a fi rm footing.
NOTE: Accessory Loading Wheel Cat. No. 47-53-5002
can be used for a single-person lift into a van or truck
bed.
POWERTREDZ™ Lift Assist
(MXF501 only)
WARNING
Keep bystanders away when using
the MXF501 POWERTREDZ™ lift
assist. Always clear the area of obstructions
before use. Loss of control could cause injury.
Using lift assist is one person operation
.
Use the POWERTREDZ™ lift assist to move the
machine up and down stairs, into or out of a work
vehicle, etc. NOTE: The POWERTREDZ™ lift assist
will not engage if there is insuffi cient battery life left to
ascend/descend a standard fl ight of stairs.
To use the POWERTREDZ™ lift assist:
1. Tilt machine back onto the wheels and roll
to steps, curb, vehicle, etc. NOTE: Only use
POWERTREDZ™ lift assist to climb to a max
22" in one lift (i.e., the back of a service vehicle
or onto a platform no higher than 22")
2. Arm the machine.
3. Slide the mode selector to Lift Assist .
4. Slide the direction selector to Ascend or
Descend .
5. Tilt the machine back so the treads contact the
climbing surface at approximately 60°.
60°
6. Grasp the handle in the center
with the left hand, and near the
trigger with the right hand for
best control. Always use two
hands.
7. Slowly pull the trigger and
ease the treads onto the in-
clined surface. The farther the
trigger is pulled, the faster the
treads will move.
8. Engage as many of the treads
with the climbing surface as possible for best
control. On stairs, try to contact two steps during
the lift.
9. When ascending or descending, pull up the incline
and push the handle down into the surface. Allow
the lift assist to help move the machine. Guide
the treads using the transport handle. Maintain
downward pressure.
Ascending and Descending
Maintain downward pressure
while pulling up.
Push
Pull
MAX
22"
10. Once a landing is reached, pull up on the ma-
chine to engage the wheels.
11. When descending, roll the wheels out past the
edge to engage the treads. pull up the incline and
push the handle down into the surface. Allow the
lift assist to help move the machine. Guide the
treads using the transport handle. Maintain down-
ward pressure. Allow the POWERTREDZ™ lift
assist to pull itself down.
Roll wheels off edge
and engage treads.
12. Unarm the machine before storing.
13. For additional instruction, please visit the product
page at milwaukeetool.com.
Hoisting
If it becomes necessary to hoist the machine, use
the center of the transport handle as the anchor
point. Ensure the hoisting strap will not slip or con-
tact other parts, such as the POWERTREDZ
TM
lift
assist trigger.
Drain Cleaning Setup
1. Place the sewer drum machine no further than 2'
from the drain. WARNING! Greater distance can
cause twisting, kinking, breaking or whipping of
the cable.
2. Remove the foot pedal from storage and unwrap
the cord and place to the side, ensuring the cord
will not tangle with the cable.
ONE-KEY™
To learn more about the ONE-KEY™ functional-
ity for this machine, please reference the Quick
Start guide included with this machine or go to
milwaukeetool.com/One-Key. To download the
ONE-KEY™ app, visit the App Store or Google Play
from your smart device.
ONE-KEY™ Indicator
Solid Blue Wireless mode is active and ready
to be confi gured via the ONE-KEY™
app.
Blinking Blue Machine is actively communicating
with the ONE-KEY™ app.
Blinking Red Machine is in security lockout and
can be unlocked by the owner via
the ONE-KEY™ app.
Loading ...
Loading ...
Loading ...