Loading ...
Loading ...
Loading ...
4
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Prior to cleaning or other maintenance, the appliance must be disconnected from the power supply.
• Do not install the appliance in a location that may be exposed to combustible gas.
• If combustible gas accumulates around the unit, it may cause fire.
• lf the appliance is knocked over durin use, turn off the unit and unplug it from the main power supply
immediately. Visually inspect the unit to ensure there is no damage. If you suspect the unit has been
damaged, contact a technician or customer service for assistance.
• Our product should not be used in a water damaged environment.
• ln a thunderstorm, the power must be cut off to avoid damage to the machine due to lightning.
• Do n
ot run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do
not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not
be tripped over.
• Do not operate unit with a damaged cord or plug. Discard unit or return to an authorized service facility
for examination and/or repair.
• The appliance shall be installed in accordance with national wiring regulations.
• Contact the authorized service technician for repair or maintenance of this unit.
• Turn off the product when not in use.
• The manufacturer’s nameplate is located on the panel of the unit and contains electrical and other
technical data specific to this unit.
• Be sure the unit is properly grounded. To minimize shock and fire hazards, proper grounding is important.
• The power cord is equipped with a three-prong grounding plug for protection against shock hazards.
• Your unit must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use
is not adequately grounded or protected by a time delay fuse or circuit breaker(please refer to the
nameplate for the electrical data), have a qualified electrician install the proper receptacle.
• The unit’s circuit board(PCB) is designed with a fuse to provide o
vercurrent protection Specifications of
the fuse are printed on the circuit board, such as: T 3.15A/250V (or 350V), etc.
CAUTION
Loading ...
Loading ...
Loading ...