Loading ...
Loading ...
Loading ...
14
7. PUMP Function (only for pump model):
Press the
button to activate the built-in pump
function. Pump Mode Indicator will be on. When
using this function, the unit will automatically
pump water out until the water tank is empty.
The pump will stop automatically once the water
tank is empty.
• Pump drain hose must be well connected for
this mode.
• Make sure the drain hose is pointed in the
direction where you would like to drain the
water to.
• If the pump indicator light and bucket full
indicator light flash simultaneously after
pressing the Pump button, the drain hose
may not be installed correctly. See page 16
for instructions on how to properly install
the drain hose.
NOTES
More Features
AUTO SHUT OFF
The dehumidifier shuts off when the bucket is full, or
when the bucket is removed or not replaced in the
proper position. For some models, the fan motor will
continue to run for 30 seconds.
When the Full indicator light illuminates, please empty
the bucket and reinstall it correctly.
Then, wait 3 minutes before resuming operation, it
cannot restart operation in the first 3 minutes. This is to
protect the unit.
Operation will automatically start after 3 minutes.
CHECK FILTER FEATURE
The unit will automatically track how long the fan motor
has been in use. Once the accumulated operation time
reaches 250 hours, the check filter light will turn on,
letting you know it is the optimal time to clean the filter.
After cleaning and reinserting the filter, press and hold
the FAN (reset filter) button for 3 seconds to turn the
light off. This will repeat after every 250 hours of use.
AUTO-RESTA
RT
If the unit turns off unexpectedly due to loss of
power, it will restart with the previous function setting
automatically when the power resumes.
Loading ...
Loading ...
Loading ...