Loading ...
Loading ...
Loading ...
22
How To Clean & Care For Your Product
CLEANING AND MAINTENANCE
Turn the dehumidifier off and disconnect the plug from the power source before cleaning.
CAUTION
DO NOT operate the dehumidifier without a filter because dirt and lint
will clog it and reduce performance
3. Clean the air filter
• To remove the filter every two weeks based on normal operating
conditions.
• To remove the filter, pull filter outwards.
• Wash the filter with clean water then dry.
• Re-install the filter, replace bucket.
4. Clean the pump filter
• Clean the pump filter every two weeks based on normal operating conditions.
• Take out the side access tank from the unit and remove the bucket top cover. (as shown as Fig. 9)
• Remove the screw as shown as Fig. 10.
• Take out the pump drainage structure and clean the filter at the button of the hose.
• Reinstall the filter and pump drainage structure to the side access tank.
Do not use a dishwasher to clean the bucket. After cleaning, the bucket must be in place and securely seated
for the dehumidifier to operate.
NOTE
1. Clean the Grill and Case
• Use water and a mild detergent. Do not use bleach or abrasives.
• Do not splash water directly onto the unit. Doing so may cause an electrical shock, cause the insulation
to deteriorate, or cause the unit to rust.
• The air intake and outlet grilles get soiled easily, so use a vacuum attachment or brush to clean.
2. Clean the bucket
Every few weeks, clean the bucket to prevent growth of mold, mildew and bacteria. Partially fill the
bucket with clean water and add a little mild detergent. Swish it around in the bucket, empty and rinse.
Remove
the screw
Fig. 10Fig. 9
Fig. 8
Loading ...
Loading ...
Loading ...