Loading ...
Loading ...
Loading ...
13
Humidity cannot be adjusted in this mode.
NOTE
Humidity cannot be adjusted in this mode.
NOTE
The fan speed indicator light illuminates under different
fan speed settings.
NOTE
For some models, The unit will quit Dryer
mode after a maximum 10 hours operation.
NOTE
Dryer and Comfort are optional; The
humidity setting cannot be manually
adjusted in Dryer, Cont. and Comfort Mode;
The set humidity will be displayed when
the selected mode is Set, and the ambient
humidity will be displayed 5 seconds later.
NOTE
Humidity can be set from 35% to 85%, with
5% adjustment per press.
NOTE
3. MODE Function:
Press the button to select the mode you want,
as shown: Set → Cont. → Dryer → Comfort.
Set Dehumidifying mode (Set)
Set mode allows you to manually adjust the
desired humidity level between 35% and 85%.
Press the button to select the Dehumidifying
mode, and adjust the desired humidity by
pressing the UP and DOWN buttons.
Continuous Dehumidifying Mode (Cont.)
In Continuous mode, the dehumidifier works
continuously to remove moisture from the air.
Press the button to select the Continuous
dehumidifying mode.
Comfort Dehumidifying Mode - optional
In Comfort dehumidifying mode, the unit
will automatically control room humidity in a
comfortable range from 45%~55% according
to the room temperature.
Press the button to select the Comfort
dehumidifying mode.
Dryer mode (Dryer) - optional
In dryer mode, the unit will filter out moisture
and blow it back into the room at a warmer
temperature on a higher fan setting.
Press the button to select the Dryer mode,
and the unit will operate in Continuous
dehumidifying and High fan speed mode, in
this mode.
30~50cm
Wet clothes
30~50cm
Allow 30~50cm of distance
on the top and right side of
the unit to the wet clothes.
4. UP AND DOWN Buttons:
Humidity Set Control Buttons
The humidity level can be set within a range of 35% RH (Relative
Humidity) to 85% RH (Relative Humidity) in 5% increments.
TIMER Set Control Buttons
Press the UP and DOWN buttons to set the Auto start and
Auto stop time from 00:00 to 24:00.
5. FAN SPEED Function:
Press the button to select fan speed in the following setting:
Low → High → Low ...
6. DISPLAY:
The electronic display will show the ambient humidity and
set humidity. When the timer function is used, the display
will show the set time. If there is an error, the display will
show the error code.
Error Codes:
ES/EH61 - Evaporator coil temperature sensor error.
Unplug the unit and plug it back in. If the error repeats,
call for service.
AS/EH60 - Room temperature sensor error. Unplug the
unit and plug it back in. If the error repeats, call for service.
P2 - Bucket is full of water or bucket is not in right position.
Empty the bucket and replace it in the right position.
P1 - Unit is defrosting. Allow the unit time to automatically
service. The protection will clear after the unit self defrosts.
(some units)
EH00 - Indoor EEPROM error. Unplug the unit and plug it
back in. If error repeats, call for service. (some units)
1. Close doors and Windows while operating in this mode.
2. For best results, please ring out excess moisture from
the clothes before using the dryer mode.
3.
Make sure to direct airflow at the wet clothes.
4. Clothes that are thick and heavy may not dry as effectively.
Fig. 5
Loading ...
Loading ...
Loading ...