Loading ...
Loading ...
Loading ...
12
2. TIMER Function:
Press the Timer button to initiate the Auto start and Auto stop function, in conjunction with the UP and
DOWN buttons.
Auto start setting
1. In the shutdown state, press the Timer button to active the Auto start time.
2. Press or hold the UP or DOWN button to change the Auto start time by 0.5 hour increments, up to 10
hours, then at 1 hour increments, up to 24 hours.
3. The selected time will register in 5 seconds and the system will automatically revert. The control will
count down the time remaining until start.
Auto stop setting
1. In the startup state, press the Timer button to active the Auto stop time.
2. Press or hold the UP or DOWN button to change the Auto stop time by 0.5 hour increments,
up to 10 hours, then at 1 hour increments, up to 24 hours.
3. The selected time will register in 5 seconds and the system will automatically revert. The control will
count down the remaining time until stop.
The timing can be adjusted to increase or decrease by 24 hours. After the TIMER setting is complete, you can
press the button again to check the TIMER setting status. After the TIMER setting is complete, you can cancel
it by setting the set time to 0.0.
NOTE
1. POWER ON/OFF Button:
Press to turn the dehumidifier on and off.
WIRELESS Button
1. Press and hold on the POWER button for 3 seconds to initiate the Wireless connection mode. The LED
DISPLAY shows ’AP’ to indicate you can set Wireless connection.
2. If connection (router) is successful within 8 minutes, the unit will exit Wireless connection mode
automatically and the Wireless indicator illuminates and the unit enters the previous function. If connection
fails within 8 minutes, the unit exits the Wireless connection mode automatically.
When the unit is connecting to the internet, the quick glance light will flash white light.
NOTE
Loading ...
Loading ...
Loading ...