Loading ...
Loading ...
Loading ...
40
AXIS P3301/-V/AXIS P3304/-V - System Options
Resetting to the Factory Default Settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described
in
Maintenance, on page 38) or use the Control button on the side of the camera (see page 5) as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1. Disconnect the power cable or if using PoE, disconnect the network cable.
2. Press and hold the Control button while reconnecting power.
3. Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to 15
seconds).
4. Release the Control button.
5. When the Status Indicator changes to green (which may take up to 1 minute), the process is complete and the
camera has been reset. The unit now has the default IP address 192.168.0.90
Note:
For other methods of setting the IP address, please refer to Installation Guide that accompanies the product, or download
a copy from www.axis.com
Loading ...
Loading ...
Loading ...